@craftystax Take care with these Hollywood ones, or any vintage magazine. While any content created *for* the magazine is indeed in public domain, any pre-existing content *is not.* This is especially true of studio stills of famous actors' faces, movie posters, and movie stills. Universal, WB or Disney still owns all that stuff and they are all litigious. Also, the photo of Karloff you had mentioned before is not in public domain. Universal not only has renewed the Karloff image as their property but also trademarked any Frankenstein's monster with bolts in neck who is green with square head etc. as they claim that vision is "theirs." Films are copyrighted 95 years from when they were made, if they were made before 1978. So we are currently in 2024, so we are only now reaching films made in 1929-30. The Universal monsters were much later. Just didn't want anyone using those studio shots of movie stars or reproducing the movie posters from magazines, especially for things like Abbott and Costello which are highly protected. Also it is good to note that even if a movie is in public domain, it is only (the showing of) the *whole movie* which is unbound to be freely copied and distributed. Stills, and the actors' faces/personas are a whole different category of intellectual property which can be renewed indefinitely if the studio or the family care to, in more ways than one. That is to say the whole film, and the *content* of the film often have two different copyrights and sometimes even two different owners. Of course, some IP they will protect more than others. You're probably pretty safe using things at least 95 years old but in a couple of years for instance, James Cagney, Bogart etc will be coming up and I'll bet you dollars to donuts that Warner Bros will have those faces strapped down as intellectual property regardless of the whole individual films being freed up for copying and distribution. Plus actors can have publicity rights/personality rights which supercede their image being used without permission even if a film is in public domain. Just don't want anyone losing their house or anything out there!
@bjornlinsin4570Күн бұрын
Final result is a bit off compared to the examples at the beginning of the video... good try regardless.
@cataliaishereКүн бұрын
Sadly the link no longer works :(
@craftystaxКүн бұрын
Yes I really hope they bring this back! There is another sketch tool that is great - located here: kzfaq.info/get/bejne/p7l1g6qjxpfcfKs.html
@cbbcbb68032 күн бұрын
Can we use these tips with LibreOffic Calc?
@phyllisedmondson85172 күн бұрын
Thank You for this video 😅 OMG my first class from summer break is SPREADSHEETS.
@michaelgastner2 күн бұрын
Thank you for the explanation. It's very helpful.
@diptibasumatary83703 күн бұрын
Sir, I am new user of leonardo ai and I wanted to try 3d animation(disney type) that I see in other tutorial videos. But in this new preset there is no option for 3d animation style. I tried few preset styles but it comes out in concept style. So how to make like disney type 3D. Thank you
@mixedspots5 күн бұрын
Hello Sir, would you be kind enough to please upload a video of niche to prepare for the coming Q4 so we could prepare it ahead of time? You’re one of the few whom I find very helpful and honest in the business of print on demand. Thank you for your time sir.
@MandyWood-o8n6 күн бұрын
That was so informative, thank you so much.
@Ellesse8236 күн бұрын
Are you able to move the words around so that they match up with cities? Would you have the option to do so when you save it as a vector file and move the nodes?
@monikasaringer11526 күн бұрын
Very informative, thank you
@andreagarofolo94317 күн бұрын
How would I make an image with words in inches instead of pixels. I never did a T-shirt with words let's say if I have lots of eight by 11 piece of paper and I wanted to put words with some decorations let's say flowers on the outside or in the image or whatever on the side how do I measure that to be put in the middle of an 8x10 piece of paper to be put in the middle of an 8x11 of paper. I've always done my own words on cricut I've never taken an image offline with words and just put it on a shirt I've always taken just images of a design. Hope this makes the words are let them with flowers around it and I'm just trying to figure out how to measure something like that My printer only prints eight by 11.
@groundedharmony8 күн бұрын
I use Tibbixel, which is similar site.
@RoseDenver-sr2vp10 күн бұрын
Thankx !!!
@positivity_shorts11 күн бұрын
wow amazing I love the way you explain
@magicimaginations11 күн бұрын
TY, i'm moving from PS to Affinity and some things are intuitive but other things like this drove me crazy lol
@sandragillen600611 күн бұрын
Hi I love your videos and have learnt so much from them. Thank you
@danielmatocinos170115 күн бұрын
Hi! Need some help. When you download it and you want to remove the background, the texture remains all over the background. How do you merge the texture just for one specific layer? Thanks in advanced!
@craftystax14 күн бұрын
Yes good question - when you click the texture layer, there is an option to "clip content". You can clip the content to the text if you want (instead of the whole design). I hope that helps!
@msvetta360216 күн бұрын
Thank you for sharing. I am very interested in selling on CF!
@elephantintheroom567816 күн бұрын
Wow! Those mock-ups were awesome! They really do help sell Gelato, along with the local printing in so many countries.
@msvetta360216 күн бұрын
Thank you for this valuable information! I will definitely look into this.
@On-the-Up16 күн бұрын
You haven't linked the app or shown the icon of it in your video so I'm not sure I downloaded the right one. The Leonardo AI on google playstore is not free! You only get a free 3 day trial but it wants access to payment before it allows this...
@craftystax15 күн бұрын
I am sorry about that! I just use the website: leonardo.ai/
@SZtech_Official18 күн бұрын
All these images can be used for KZfaq videos, you can use them for free
@Lambchop5919 күн бұрын
What is the image dimensions units? Inches? How who we figure pixels for our pod ?
@Lambchop5919 күн бұрын
Hi whats up with this tokens stuffy? Shouldnt we just pay to use it?
@craftystax19 күн бұрын
You get a certain amount of tokens every day (150 currently). So you just use up your tokens and then if you want more, you can use the paid plan, or just wait a day and you get more tokens. I just use a little bit every day (or every other day) and it's been enough for me
@Lambchop5919 күн бұрын
@craftystax thank u kindly but i was wondering why they just don't have a paid subscription vs crazy token??
@alexisjavier915819 күн бұрын
gracias por compartir ,informacion muy intersante,nuevo suscriptor desde argentina
@craftystax14 күн бұрын
Gracias!
@dianajordanova469320 күн бұрын
Can i sell digital products generated by Leonardo AI on etsy?
@craftystax19 күн бұрын
Yes you can! Leonardo doesn't prohibit the selling of a design. (Plus it would be very difficult for them to monitor what is happening with all of the designs they produce).
@dianajordanova469319 күн бұрын
Thank you! I am wondering as well if it should be mentioned somewhere in etsy that the digital products are AI generated? I think i have read for such requirements
@BlackCatAlley88820 күн бұрын
No it didn’t help, is there a step missing here, cause I hit the mirror icon and it just keeps searching and nothing ever shows up for me to get the code and link the two together, what mode do you have to have your tv in?
@craftystax19 күн бұрын
It is possible that your TV isn't set up to accept mirroring (like is it a smart TV)? Typically on your TV, you would go to Settings > Select Network > Wi-Fi Connection and then turn on the wifi. Hope that helps?
@Jim_One-wl4ke23 күн бұрын
I m new to Inkscape & using it for my laser engraving project. The text just couldn’t fill and I only get outline text no matter what fill Color I choose and stroke I play with. Please advice. Thanks for sharing yr skill❤
@craftystax14 күн бұрын
Hmm that is an interesting situation - generally speaking, you can select the fill on the lower left. So select your text (like highlight it) and then select your text color down in the lower left. I hope that helps?
@Jim_One-wl4ke14 күн бұрын
@@craftystax in inscape it filled but not during laser engrave only outline, thanks for reply
@RAMIRELLI-Art23 күн бұрын
Mr. Crafty S. I have this .PNG file that is group. There are 2 parts (white) that need to be deleted and the place will look transparent like the rest of the image. I am struggling to cut the parts of the object. It is a grouped file, and I cannot ungroup it either I used shift to select both objects and I go to Path and difference, but I do not get the desired result. I wonder if I can supply the file and make your next tutorial where the part to cut out is round. Looking forward to your insight. Thanks a great deal.
@craftystax23 күн бұрын
For sure just email it to me at [email protected] and let me see what I can do!
@RAMIRELLI-Art23 күн бұрын
What version of Inkscape is this? Mine is different and looks different.
@craftystax21 күн бұрын
Good question - this vid is 2+ years old so it is pretty like version 1.2
@monikasaringer115223 күн бұрын
Havn't heard of img2go will check it out, thanks
@user-lu2dp4oh7n24 күн бұрын
Wow thanks bro
@hexamigo24 күн бұрын
31:03 Great tutorial. However, I don’t know how you can work without displaying the file extensions.
@cintiatre25 күн бұрын
Love your videos and tips. Thanks for sharing 👍
@annadreamsart975625 күн бұрын
Thank you!
@perliva25 күн бұрын
Being a typographer this is the right video for me.
@RoxiAckson25 күн бұрын
Fantastic vid!!! Thanks a lot!
@NobuharuKunai25 күн бұрын
Great video, appreciate you sharing it!
@Bobine.Austwick25 күн бұрын
Thanks a ton, this was super helpful!
@DellyHatwell-kd325 күн бұрын
cant wait to start my pod
@TyrusOldal25 күн бұрын
is it actually that easy? wow
@AkimiHori25 күн бұрын
Loved the video!💕 Just started my comic book collection and found Toon Haven. They offer a huge variety of digital comics for every genre, and lifetime updates too!😍
@PaulG.Morrison25 күн бұрын
wow, great video. thanks so much
@MarusBacon25 күн бұрын
very helpful, worth the watch
@EarleBnow25 күн бұрын
ill definitely try that, thanks!
@Tahusplanet40825 күн бұрын
How to export high resolution eps file?
@GaynorStaves26 күн бұрын
Thank you. A very helpful video.
@MargoCowen28 күн бұрын
Love the video❤️ I just started my print-on-demand journey and found Crafted Threads. They have a ton of designs and it saved me so much time. They have something in every niche. And lifetime updates too!!