Hi Ben, thank you for your effort. This is perfectly useful information. Not sure, why this vides has no comments. May I ask: Unfortunately, all the non-CLI dual WAN routers, which I tried, transmit data through the failover WAN even when the primary WAN is available and operates stable (pings, analysis data, etc..). Would you know, please, if it is possible to configure the secondary Failover WAN so that no metered data ist transmitted while primary WAN runs stable using EdgeOS CLI?

Hi, how are you? I hope everything is fine with you. I saw your video, and even seven years after it was posted, the edgeroute are still being sold with the same configuration, and it is necessary to use this application. I'm going to apply this project of yours, and as I don't know it, I've copied your project, see below, and I'm asking for your evaluation to check if I've copied it correctly, and if after seven years there have been any changes. My equipment is an Edgerouter ER-X 5, for home use. ---------------------------------------------------------------------------------------- show ubnt offload IPSec offload module:loaded HWnat offload module:loaded Traffic Analysis : export : disabled dpi : disabled (enter) configure (enter) edit system offload set hwnat enable[edit system offload]enter set hwnat disable[edit system offload]enter commit[ system offload hwnat disble ] This chage will take effecte when the system is rebooted [edit system offload] enter top enter

Hi Ben, Thanks for this tutorial. However, can you explain what is the different from this link "kzfaq.info/get/bejne/ir1xgJySv6jYfmw.html"? Both make VIF but on different interfaces. I tried to create 2 VLANs, one for house network (172.16.x.x), other for lab testing (10.30.x.x). I also have a switch that can configure with VLANs

Excellent video! Been teaching QoS to myself for RoCEv2 deployment. Thanks so much. DCQCN/ ECN+WRED is the last piece of the puzzle! Using Dell 5232F-on using OS10

Very helpful for my ER lite 3-port. Worked exactly as shown. Thank you!

how to configure dual stack with pppoe

Man Ben, your videos are awesome. I tried the link to config docs and it doesn't work for me. I don't do any other social media so I have to ask here...is there another path to cli config examples. I have a really bad back and neck and this seems to be the fastest way to get setup. Retired Air Force veteran nerd who likes to tinker with computers and network stuff. Thanks again!

How is this similar to CGNAT? Trying to set that up on a UISP Edgerouter

Solid Video, big help

Hi ben is there a way to configure the unifi usg via ssh command lines?

Hey! fantastic video! after following this however Im running into the problem where the devices are not getting ip addresses on the guest network... any ideas! Im using a newer version of unify version 8.xx if that helps

The one drive link is dead. Can you post an updated link?

free my boi gramham

Hi there, awesome video, could you please share the config file again.

Hoi Ben hoe krijg jij die netwerkinfo op je buroblad?

Hi! How are you? I was searching for some configuration regarding flexVPN and just found your video. It is a good explanation thank you. I have a question, is there any way to become this VPNs as Full mesh topology? Instead of HUB and SPOKE

thank you for the tutorials.. may i request for the summary of the commands you shown on this video please?

Hello everything is fine ? I have a Juniper SRX345 and I want to put a UNIFI Firewall in a branch. My question is at the branch, do I need to have internet with a fixed IP? Can the VPN connection be in AGG mode or just main mode? Tks

Any chance of an updated version of this using the UISP router via the crap cloud interface ?

Excellent! More videos like this!!

freaking good explanation!

Thanks for the video dude,.

so it is possible to have more than 2 wans ? and if so , how ?

good demo !

is it just me, but when i login to m$ with looking for the config files, it takes me to my onedrive, and not to Ben Pin shared file?

Greetings Ben, I'm kinda late to the game here. I appreciate your videos so much but really interested in trying the CLI command's as I learn to configure my edgerouter x for VLAN's etc. The link didn't work for me to copy your examples from one drive. Is there a new location for this helpful resource? Thanks much! 63 year old retired nerd! Best wishes for your continued success.

Looks like those config files are no longer in your directory. Could you upload them again?

Thank you it was so clear..

hey have configured this but cannot connect multiple users

hello how do you have multiple users on this l2tp ipsec vpn tunnel

This is perfect; watching this 6 years later and this is still the best guide to setting up an OpenVPN server on an EdgeOS device. Thank you!

Is it also possible to create a script to auto login to a static captcha page, when term expires?

sweet. thanks

Thank you for this video. I first tried the GUI Bandwidth tool on my ERPoE 5, it did nothing. The CLI method works well, but doesn't reflect actual bandwidth at all. I know this for a fact, because running iperf3 to the same server from a client connected through the same router results in a much higher bandwidth. Router CLI reported bandwidth: 317 Mbit/s PC CLI reported bandwidth: 486 Mbit/s That PC is connected to the router via an AC AP Pro, path to iPerf serveris (Wi-Fi--Router--Switch--Server). I know you said generating data is slow, but I was expecting something like 20% less than maximum, not one third :) I also attempted to run test as a receiver on the router, but it yielded an even lower bandwidth Server to Router reported bandwidth: 141 Mbit/s PC to router reported bandwidth: 170 Mbit/s Looks like this tool yields incorrect data.

Thanks for this video. Do you plan to create videos with scripts that show us how to determine status of an interface? I'm needing to learn how to script for proper VRRP operation. If an interface is down or vrrp is in a fault state on an interface, how to determine this and disable a backside interface so my upstream and downstream traffic doesn't get confused.

thank you!!! i had bounce around for a long time trying to get this 'just right'...6 years on and your vid is still relevant

Sh ip route eigrp not showing the routes

there is a reason that its not going exactly to the 5mbps the reason is that smartque is keeping some room free for the spikes on requests

you saved my life 6 years in the future xD

what about ipv6? that would be very helpful. thankyou!

Good video. Some things have changed with new EdgeRouter updates. The provided one-drive link does not contain any conf files. particularly i can't find any " set server" commands in the current guide from UBQT

you have a video where you add a 2nd WAN where there is a existing configuration?

Hi, Ben Thank you very much for explaining and also providing the example.

What about Web other and other how can we know the details of this traffic

The only thing I don't understand is how does he give himself his own ip for the other port. I need to do that so i can config this way and you don't say how to do that. I will read more and trying to learn.

awesome video thank you

hello the configuration files link seens to be broken, could you update the link if possible? thanks for the video, very usefull

Hi Ben, I hope everything is well, I watched all of your videos regarding Ubiquiti products especially ER. I established site-to-site vpn to my 2 ER, ER4, and ER6, but unfortunately, I cannot access the server behind ER4 as well as both routers using VPN, I hope you can help me solve this. Best Regards

How do you also trigger a failover if the master router’s WAN has failed?

Trying this in 2023, this does not work.