Does the aftermarket intake void the factory warranty?
@danklabz42047 күн бұрын
Thank goodness. I stripped a motor mount off in the side of my gsxr 750 block. I was freaking out but now I’m confident I can rethread it thanks
@user-ii4be6br5z8 күн бұрын
Where to buy?
@jonathancoram113313 күн бұрын
How much like to have a pair of them
@natejones784916 күн бұрын
Put a case saver on it
@reycarino502816 күн бұрын
What is size of that helicoil?
@ertx.538617 күн бұрын
I have question Should we use a bigger bolt than the before one or the same like I had 10 mm if make new threads should we use the 11mm bolt ?
@GuessWhoGurr17 күн бұрын
The helicoil is made so you can use the oem size bolt
@CarnageB9S418 күн бұрын
Did you have any issues getting the box to sit down in all 3 bushings? I have a b9 and it looks to be the same as yours but I can’t seem to get the box to sit in it’s spot the way the OE box fits
@GuessWhoGurr17 күн бұрын
Mine just popped right in, is there anything under it holding it up?
@CarnageB9S417 күн бұрын
Not that I saw. I just recently uninstalled the apr bc one of the attachments on the turbo inlet pipe” for the breather hose I think”just fell off. APRs customer support is legit.. they’re overnighting a replacement pipe. When I put it back on I’ll let you know how it goes.
@GuessWhoGurr17 күн бұрын
@@CarnageB9S4 that exact thing happened to me, your next one might do the same thing. I mixed up 2 part epoxy and glued mine back on with no issues
@CarnageB9S417 күн бұрын
@@GuessWhoGurr I’ll do that if it happens again. I was just shocked they replaced it. I purchased it almost two years ago but it sat in the garage for 6 months bc the engine failed and I put the stock intake back on before I took it to the dealership.
@CarnageB9S417 күн бұрын
Any chance you can send me the link to that ratchet. I can’t seem to find that part number. I checked Amazon, google and the cornwell site.
@oldjarhead38623 күн бұрын
Great video, great riding and nice sled. One comment and maybe you figured this out. But ripping fresh power on a narrow trail can be tricky. 😮
@GuessWhoGurr18 күн бұрын
Straight up! The snow that day was insane and so fresh
@fragil7251Ай бұрын
Does this come with sizes if so how do you calculate the size
@GuessWhoGurr18 күн бұрын
Need to go to a hardware store and get a nut and bolt sizing guide
@ronfox5519Ай бұрын
Music really ruined an otherwise great vid
@GuessWhoGurr18 күн бұрын
Awe :( did you try turning the music off and watching it?
@umark1991Ай бұрын
Would this support 200+ pounds of force or pressure? Have a escooter where the rear suspension under the deck separated from the rear tire connector. I think this should work but would it support the weight?
@GuessWhoGurr18 күн бұрын
Idk why not
@stevenramerproductions9039Ай бұрын
I usually ride the electric scooters they have downtown there
@GuessWhoGurr18 күн бұрын
I don’t think they have them anymore!
@odawgg_420Ай бұрын
Used to clean that cabin you guys stayed in.. hope you enjoyed the U.P
@GuessWhoGurr18 күн бұрын
Crazy! Place is sick right off trail 8
@Ilham_iomАй бұрын
alat pematah helicoil spill
@GuessWhoGurr18 күн бұрын
Sure do
@obigonzalezАй бұрын
Thanks,👏👏👏🙌 Bro Great vid.
@GuessWhoGurrАй бұрын
Glad you liked it!
@anthonyjackson14462 ай бұрын
Great video and scenery shots and content of Fort Wayne, Indiana’s second largest city, Also became a subscriber as well for more of this type of stuff from around Fort Wayne and especially the downtown district.. 😃🙌🏼👍🏢📸👏🏼
@GuessWhoGurr2 ай бұрын
Thank you Mr. Jackson! Plan on riding down Pontiac street next 😁
@trevorszapkiw38852 ай бұрын
"Fort Wayne is a fun place to live if you don't mind the shootings" lmfao 😅
@GuessWhoGurr2 ай бұрын
Gotta keep that THANG on ya!
@TonyBoloney-yg9eb2 ай бұрын
@GuessWhoGurr lol gaurantee you you don't keep anything on you, keep riding that bicycle garrett
@GuessWhoGurr2 ай бұрын
@@TonyBoloney-yg9eb you know where I live! come find out :)
@TonyBoloney-yg9eb2 ай бұрын
Lol, now ive seen it all. Fort wayne is a trash pile. I learned to wheelie a bike when i was 12 garrett lol really? What color is your skin again?
@GuessWhoGurr2 ай бұрын
🫂
@derekturnbull7052 ай бұрын
Super clean! Duncan Racing 🔥
@GuessWhoGurr2 ай бұрын
Thanks brother!!
@scottthesnitch52802 ай бұрын
Whats so "revolutionary" boy? Heres a clue, nothing ! You are slow.
@GuessWhoGurr2 ай бұрын
Genius
@2WheelDec2 ай бұрын
Silver lake?
@GuessWhoGurr2 ай бұрын
YESSIRRRRRRRRRR
@2WheelDec2 ай бұрын
@@GuessWhoGurr dudeeee I’ve been there on a side by side but I wanna bring my dirtbike so bad! Looks like a blast!
@GuessWhoGurr2 ай бұрын
@@2WheelDec Brother... I want to bring a cr500 out there
@2WheelDec2 ай бұрын
@@GuessWhoGurr that would be sick!
@earlmagee49302 ай бұрын
His husband must be proud
@GuessWhoGurr2 ай бұрын
V proud
@davan43392 ай бұрын
Thats hot
@GuessWhoGurr2 ай бұрын
Thanks
@dingdong-hd8tw2 ай бұрын
Re posting old trash? Cool video garrett. You sell that broken thing yet and get a harley or a subaru? You are so cool dude.
@GuessWhoGurr2 ай бұрын
Yeah
@joelaichner30252 ай бұрын
Kingsford , last winter we had virtually no snow , they never even open the trail gates !
@GuessWhoGurr2 ай бұрын
crossing my fingers for next year!
@joelaichner30252 ай бұрын
@@GuessWhoGurr last year of no snow like this year , was 1977 , and the winter of 78 & 79 was a record year , for snow fall ,brand new motor , new crank , double bearing kit , SLP Performance Edition , 700 Liberty , in my 2004 switchback , I threw the SLP Catalog at it , everything is new. , never even started it last year , still fresh for next year , never even put gas in it , first tank gets premix for break in , but I did drink a lot of beers last winter , And watched a lot of snowmobile videos , only had to plow twice last winter , but like I said ? Drank a lot of a beers , 200 plus hours into my sled , I’ve got new 850 money invested in it , hard to stop , replace everything , Slydog skis , 8 inch powder Hounds , 10 inch carbides , no studs in the new track , brake early , fast out
@joelaichner30252 ай бұрын
@@GuessWhoGurr SLP claims 151 to 152 hp , with the bored carbs , Rich Daily , on the phone says maybe 140 to 145 realistically , dude is sharp
@Spac3Monkey2 ай бұрын
Springs way too stiff for “drag racing” 😂
@GuessWhoGurr2 ай бұрын
crazy
@Sr_Cheems__memen2 ай бұрын
Some Day i wanna have a banshee the day i have one im coming back here to comment
@GuessWhoGurr2 ай бұрын
can't wait for that!
@mikeyyarbrough28492 ай бұрын
How are you liking those smart carbs? Been thinking about put a pair of 38s on my 421 cheetah cub
@GuessWhoGurr2 ай бұрын
They are sick, if you got it like that slap them on!
@kuldeepsankpal64432 ай бұрын
Is that tap or is it reamer ? Cause it is not recommended to turn back reamer.
@christianfigueroa15172 ай бұрын
Its a tap
@GuessWhoGurr2 ай бұрын
can't remember?
@tfmobilewash8402 ай бұрын
How can i get those ? I need to fix mine
@GuessWhoGurr2 ай бұрын
Amazon!
@humayunniazi22202 ай бұрын
I think if you put a cloth under the drill while drilling, you won't be so worried about the vacume
@GuessWhoGurr2 ай бұрын
wow thank you for that!
@realstakes1013 ай бұрын
Practice popping the clutch from a stand still and use your back break
@GuessWhoGurr2 ай бұрын
One day I will be good
@warrenranstrom44623 ай бұрын
How do you know what size drill bit to use? And what size tap to use?
@GuessWhoGurr2 ай бұрын
take your bolt to a hardware store and find the size it is!! then google is a great resource for the rest of this type of information!
@chosyn1873 ай бұрын
Mannn KZfaq degree should be a thing..learning so damn much, thanks professor! 😂
@GuessWhoGurr3 ай бұрын
no problem bud
@undisputedtruth20753 ай бұрын
I been told if you really want to hear the turbo sounds then you need an open air filter. Is this true ?
@GuessWhoGurr3 ай бұрын
It would definitely be louder but at that point it would not be a "cold air" intake.. it would suck in the hot air from the engine compartment
@macpac38033 ай бұрын
Black banshee looks sick
@GuessWhoGurr3 ай бұрын
hell yeah thanks!
@moparman440693 ай бұрын
It’s called just leave the tailgate down, Iv had to do that for years when you have a big boy banshee and it’s stretched
@GuessWhoGurr3 ай бұрын
never thought of that
@user-rn8jo2ln1d3 ай бұрын
this is good content
@GuessWhoGurr3 ай бұрын
thanks friend!!
@escapingthematrix33 ай бұрын
Is that a time sert? Question some idiot took an impact to my Harley drain plug m12 I got it out and had to use an m12.1 x 1.50 x 15mm oversized drain plug now I’m over by .10 can I still use the m12 drill and cert or do I have to go up to an m13. The m12 was oem. The treads ripped out while taking the old one out. The oversized piggyback drain plug is only .10 bigger I’m not sure what size tonorder
@GuessWhoGurr3 ай бұрын
That SUCKS!! I am sure you got it fixed by now, sorry it took so long to respond.. I honestly don't know, I look that stuff up on google everytime I have to do it.. I don't do it enough to keep it fresh in my mind
@Pro5.03 ай бұрын
The front shocks look springy and bouncey like there's not alot of dampening, especially the right front.. If that's the case you might want to have the shocks looked at. They either need recharged, or both rebuilt and charged.
@GuessWhoGurr3 ай бұрын
I had all my shocks rebuilt and sold the sucker
@Bumbaclot2134 ай бұрын
I will most likely have to do this on a stripped bolt hole for a cam cover bolt, though i’m worried about metal shavings getting into the oil
@GuessWhoGurr3 ай бұрын
use a shop vac at the same time!
@Floridawoodsbanshee4 ай бұрын
My banshee comes up when the tires get traction. Scares the sht out of me sometimes cause I'm not expecting it to stand straight up in 4th or 5th gear. I put a cooler rack on the back. It is like having a wheelie bar 😂
@GuessWhoGurr3 ай бұрын
yeah that was a bad unit, I am looking for a 250r now. I like to MX and is more practical for where I live
@Floridawoodsbanshee3 ай бұрын
@GuessWhoGurr 250r would be sweet. Especially with a built engine
@Floridawoodsbanshee3 ай бұрын
@@GuessWhoGurr and really good suspension.
@bernardomartinez38534 ай бұрын
Very nice that was quickly
@GuessWhoGurr3 ай бұрын
thank you!
@ironcannabis4 ай бұрын
Seeing this done in a block makes me feel way more comfortable about having to do it to mine.
@GuessWhoGurr4 ай бұрын
It is a very sturdy fix
@ironcannabis4 ай бұрын
@@GuessWhoGurr got her completed with ease and confidence thanks for the vid it definitely helped!!
@Nathanbaldwin8Ай бұрын
Where’d the broken end go?
@THNDERHDS4 ай бұрын
This just gave me all the information I needed and just that boost of confidence to go drill into my engine heads to repair a stripped valve cover thread
@GuessWhoGurr4 ай бұрын
Super easy fix! Just like the title says!
@JessicaIngbretson-px3zf3 ай бұрын
I must know. How did it go?
@GuessWhoGurr3 ай бұрын
@@JessicaIngbretson-px3zf worked great
@THNDERHDS3 ай бұрын
@@JessicaIngbretson-px3zf successful. It leaks still but not from the fixed threads 🥲
@JessicaIngbretson-px3zf3 ай бұрын
@@THNDERHDS Lmbo! Thanks!
@yourstruly_johnny58434 ай бұрын
What manifold are u running with these ... Built in crossover style?
@GuessWhoGurr4 ай бұрын
No was was running one with a rubber hose as the transfer port
@grantbradley50844 ай бұрын
I think it looks great cosmetically, however wouldn’t a CTS intake that costs half the price perform just as well?
@GuessWhoGurr4 ай бұрын
Yes but it isn’t carbon fiber, so not as cool. Could’ve easy spent less money
@katiriabirrielmarquez92194 ай бұрын
Put roller guide chain first don't be dumb that why u chain close shifts shaft