what is the name of ribbon cable that connect the motherboard to controller port, i been looking at every online shop its not available
@Anonymous-mz4fn9 ай бұрын
my ps2 now is not giving video output to my tv and also the disc is not spining
@BADbamajama19 ай бұрын
I know this video is old but I may have to try that method my controller Port 1 works just fine its the controller Port 2 that's giving me problems u plug a controller in and it's shorts in and out. The analog button lights up then cuts right back off. I've opened it up cleaned both ports out and lightly cleaned the ribbon off. My game gave me the impression that it was working properly I tried it out before I screwed everything back in so I got very excited. Then once I screwed everything in and plugged it back up boom same problem again. So I don't know what else it can be. Maybe I will do it all over again and go to the motherboard like you guys did. Eh I might have to replace both ports and ribbon.
@robavailability Жыл бұрын
Thank you for saving this ps2. Who would have thought a 13 year old video would save a ps2 from the landfill? This has been one of the best tutorial videos I have ever seen. You even said how the first time it didn't work for you and so you used tape. It was like you were here with me telling me what to do. I so much appreciate it guys.
@treehouseRetrosNYC Жыл бұрын
Who knew a 12 year old video would come in so handy . You are appreciated!!! Hope you still have this channel lol
@kdxip1 Жыл бұрын
12 years later and I have a question, since my controller port 1 does not work however controller port 2 does, I wanted to check if it was the controllers and tried 3 new controllers but it wasn’t the case all of them were not working, however they would work for a certain amount of time (preferably 2 minutes) and then shut down but whilst the analog flashlight is on. It also says please insert controller into controller port 1 for all three controllers, to conclude if I get a new ribbon cable can this issue be removed??
@Hchris1012 жыл бұрын
Cool channel
@abdielramirez21022 жыл бұрын
Hi! That cable is for the controllers port and the memory card slots? My ps2 is not recognizing the controllers and memory
@kingmike65012 жыл бұрын
This helped just bought one cause I wanted to finish my old game since I was a kid, thanks guys 🫡
@Carlos-mq9vo2 жыл бұрын
Jan 2022…..Was playing on my ps2 and suddenly in game the X button and few other buttons started not inputting on screen, when reset I have nothing apart from up and down on the d pad and the analogue on and off works! this is on both ports with two controllers it’s doing it with what do you think it is the ribbon cable???
@dinaabimbola45472 жыл бұрын
Ps2 slim controller port 2 not working.. Solution
@superiormotorclub12783 жыл бұрын
Link to the ps2 controller port i need a replacement?
@Thunder_Light2073 жыл бұрын
Ingenious well done 👍 that controller block has a horrible compression fitting that loves to break apart, you can insert thin plastic sheet .1 or .15mm to get the tight contact back
@leviackermann96693 жыл бұрын
Is yours fixed? I’m about to try it on mine... hopefully it works.. I want to play games on my ps2. My port 1 doesn’t work but my Port 2 does and In order for me to play games the controller port 1 has to work smhhh
@Thunder_Light2073 жыл бұрын
@@leviackermann9669 hya , i fixed it 100% ok using a thin sliver of plastic which I inserted into the top gap, this forced the ribbon down onto the contacts, rubbish connector (!) Best way is to leave this alone until u dissemble motherboard, then you can easily disconnect the mobo connector. Also the ODD best way is to dissemble this to laser deck, then easily connect bottom ribbon connector thru laser deck, way easier. Lovely system bar these 2 fiddly connectors 😜
@leviackermann96693 жыл бұрын
@@Thunder_Light207 heyyyy I just fixed mine!! Works 100%
@leviackermann96693 жыл бұрын
@@Thunder_Light207 see all I did was unscrew the ps2 a reposition a couple things on the ps2 controller port and it now it works
@Thunder_Light2073 жыл бұрын
@@leviackermann9669 u r a bad boi 😜 congrats on fixing ur system, i love servicing ps's really satisfying 🎂 Got a 2nd hand ps3 fat off ebay which I'll strip down next week, amazing how these great systems r so cheap now, thanks to the crazy ps5 prices ... Ouch! 😸
@brobroant62053 жыл бұрын
There’s literally nothing on the internet about fixing the damn thing wth
@nipoji99753 жыл бұрын
2020 and this video helped me thanks dude
@masonsnyder40493 жыл бұрын
2021 and this video helped me 😂
@robavailability Жыл бұрын
@@masonsnyder4049 2023 and this video helped me
@mill26704 жыл бұрын
May 2, 2020... bro this really help but I was trying to fix the game all day an my little bro came in start help am broke the nob that is suppose to click down on the ribbon, so i now have a bigger problem...
@juannanez67904 жыл бұрын
I followed this now my tray won't open.. Also it only lifted up the top
@chriswilliams27434 жыл бұрын
Thanks guys - nice vid. I looked at the flat controller lead in your vid & it had rust on it (someone spilt something!). Cleaned the contact points & it worked fine again. Thought it worth saying in case the actual strip is not broken, like yours was. Thanks for posting. :)
@cesarramirez76194 жыл бұрын
2019 almost 2020 and I still use my ps2 way more than my ps4👻
@unknownfruit46364 жыл бұрын
Super Broly same
@stringer36974 жыл бұрын
thx
@Allious1315 жыл бұрын
july 2019 and this helped me very good video
@billbobgruch5 жыл бұрын
Try and unplug and replug first so you don’t have to cut anything. I just did that and my player 1 port started working again
@adultmoshifan874 жыл бұрын
Hope that may be what I need to do, just got my PS2’s laser and AV out fixed, and hot a mod chip installed!
@UserL15595 жыл бұрын
I will check this.I have this problem
@pantererosa47335 жыл бұрын
Please guys help me! All of my controllers suddenly stopped to work! Levers work but no touches (X or triangle or something). And sometimes I succeed if I push so strongly. Can u suggest me what could be the problem and how can I fix it? Both ports don’t work. Thanks a lor
@triple_lei5 жыл бұрын
November 2018 and this helped me! This is also how all tutorial videos should be! No 30-second intro, no annoying music to drown out the actual instructions...
@treezy75675 жыл бұрын
Justin Sison woahhh are u fr cause I was shady on trying it
@triple_lei5 жыл бұрын
@@treezy7567 Yup, the video explained the most important things: the problem (black flex cable loose) and the solution (disassembly and repair). So I popped open the PS2, found that cable, put it back in the connector, pushed down on the connector head clasp thing to lock (you will definitely feel it), reassembled, and I was good to go. I didn't need to tape the cable down or clean it or anything. How I originally broke mine was, I accidentally pulled the flex cable out trying to fit the PS2 in a Ikea Kallax shelf with a "Better Homes and Gardens Cube Storage Shelf, H" from Walmart. Turns out the PS2 is like 3 millimeters too wide for that, but I thought I could force it in anyway. Well, because I kept the PS2 unscrewed for easier maintenance, the bottom separated, and the top shell pushed the memory cards down, and _that_ pulled the flex cable out.
@anuragthawait35735 жыл бұрын
superb bro
@keithevans35446 жыл бұрын
In no way, shape or form does the cover come off like this video describes. I have the exact same PS2... it requires 8 screws to be removed, not 6, and there is still something holding it on in the front. I still have yet to remove the cover.
@keithevans35446 жыл бұрын
OK, what these two meatheads don't tell you is that there are two screws on the underside (or top side really if the PS2 is in it's natural position) that need to come out too. You need to take the cover off the other side as well to get to these additional two screws. Once I removed them, the cover came right off.
@robavailability Жыл бұрын
I thougth that at first but you only need to remove six to make the bottom come off.
@stomachcontentz6 жыл бұрын
Thanks guys this helped me avoid damaging the PS2 while i opened it. My problem was the same. One controller worked erratically. Bought new controller. The new one didn't work at all! At that point I knew it was the PS2. Popped it open, and simply detached the ribbon cable from the Port board (on both sides), blew on it a couple of times and then reseated it properly. THAT WORKED! Perhaps heat/cold over time slightly loosened it. So happy. Thanks!!!!!
@soultombs53447 ай бұрын
This comment was my last hope, the ribbon didn’t appear damaged so I just cleaned it and reinserted it properly, and whattaya know , it works 🥲
@marksix22417 жыл бұрын
U are rubbish mechanics I broke my bloody play station because of u
@tomaszrozycki42197 жыл бұрын
i have strange issue, my dual shock dont vibre i heck it under pc and it is working no dameged cables, i thing ps2 slim do t give that much power to dual shock. Any advice?
@griseldaespinoza88107 жыл бұрын
what about if the first controller port dosent work on ps2slim
@eminmuhammed84855 жыл бұрын
mine too, the second and first ports work if I use a fake playstation 2 controller, but when I use a real one, it does not respond in the game.
@jasminepoteat47998 жыл бұрын
my ps2 isn't really grabbing the controller tab. it slides in and out. the ports work, but it's only sliding in the controller 1 port. controller 2 port is grabbing and holding the controller tab. in other words, my ps2 female part is a little worn out and loose.
@JurajKatalinic8 жыл бұрын
Please help me !!! I have very special problem. X button and CIRCLE button doesn't work in Browser or System Configuration, only in-game. When I unplug and plug back in Port 2 Controller, the PS2 reacts like I pressed CIRCLE button. Day before was working fine.
@typhoonproductions45286 жыл бұрын
Juraj Katalinic Same problem man
@rodrigotorres86348 жыл бұрын
are you guys twins?
@ruizhernandeztrustfi8 жыл бұрын
Nice! Thanks for the tutorial.
@nyarlatothep6668 жыл бұрын
I am faced with very weird issues. My PS2 controller doesn't get recognized by all games. For example Kengo works fine, Ace Combat 4 and Mercenaries: Playground of Destruction don't recognize it. Has anyone ever faced such a problem? Also, the PS2 reads Kengo without problem, sometimes it cannot read Mercenaries, and it almost always fails to read Ace Combat 4 despite all CD's being in a similar good condition.
@LucasDMX18 жыл бұрын
+nyarlatothep666 I have the same issue as you, the model I have is the slim one, the controller port 1 work only playing nes emulator on ulaunch elf and some games, it work perfect on system config menu. I opened up the console and cleaned the fuses on-board near the controllers port and the slot solder with rubbing alcohol, i used 100% isopropyl and now works perfectly, because the dust and oxidation can cause bad contact
@tomaszrozycki42197 жыл бұрын
LucasDMX1 I hope this will help with not vibrating ds2 (under pc is ok) and 3party is ok but week vib ;/
@GUYI6218 жыл бұрын
I tried this on my ps2 and did exactly what they did on the video, but when I tested it neither controller ports were working and neither was the memory card slot ;-; Is there something I might have done wrong? And is there a way to fix it? :'(
@NexusArtRealm9 жыл бұрын
Great tutorial. Glad the video is still here after all these years. Thanks for sharing, bonnow.
@yungjavier9 жыл бұрын
Cant get mine off
@philipperry76069 жыл бұрын
Thanks guys, fixed my PS2. Was just about to buy a new one!
@elementarydrw10 жыл бұрын
*brave
@elementarydrw10 жыл бұрын
30000+ views... that's a lot of broken PS2's and bare people after home fixes!
@PuppyEars1111 жыл бұрын
Thanks so much! It worked and my boys think I am awesome once again!
@cesarramirez76194 жыл бұрын
😂😂
@cymruboy9811 жыл бұрын
My controller wont work, the analog light will light up but wont work please can anyone help me ?
@rowellbayuga90297 жыл бұрын
same issue with me..any one can fix this..plzz
@rocker-barrel47866 жыл бұрын
rowell bayuga me too. Im very annoyed i wanna play my game.
@dylanpotter99195 жыл бұрын
Don't plug the remote the whole way in, keep pressing the buttons until you find the right spot as you put it in
@BryanBraide4 жыл бұрын
Dylan Potter its still not working
@Yipyip30511 жыл бұрын
I bet this is my problem
@cesarramirez76194 жыл бұрын
How did it go?
@r3p3nt44giv3n3ss11 жыл бұрын
Had the exact same issue , duck tape WON'T work cuz it must make constant pressurized contact with the motherboard port. I used the point of a very small flathead screwdriver. You MUST be very gentle when forcing the end of the cable DOWN in the port till it doesn't need to be clipped in, but clip it in anyway. Free mcboot psx-scene(dot com) is the way to go from here, but you might have a lil trouble getting it fully installed, but perseverence pays .
@MarcoVenustus11 жыл бұрын
My controler port isn't sending the info of vibration to the controllers (only port 1), and I couldn't fix it 'cause mine is slim, and the port is attached to the mother board :(
@tomaszrozycki42197 жыл бұрын
Marco Aurélio Dantas i have similiar issue official dualshock2 dont vibre but 3party works ;/ ds2 is working under pc strange.
@therealBALLOONKNOT11 жыл бұрын
how'd you train that gorilla to use the screwdriver tho?