Nice skillz, ngl looks scarry af. Thank God for the trailers ;)
@jessemichalies16 күн бұрын
It's a little nerve-racking. But you get used to it.
@Citizendefenseindustry22 күн бұрын
brother can i make a suggestion? get yourself a lil 4v skil drill. they are like 30 bucks.... your throwing around that overly huge & bulky heavy drill. Every time i watch you slip off a piece of hardware i cringe lol
@pibitchica2 ай бұрын
FUSES??????????
@armandolopez89832 ай бұрын
Simple but I always forget. GREAT reminder...THX
@american31482 ай бұрын
Watching with the sound off
@edentucker13262 ай бұрын
so draining together means they also charge together. If i hook up solar to one battery it will charge the both except take longer?
@leatijoseph8283 ай бұрын
sounds great now check the Edge of Tomorrow intro scene then you will return the pb-16ultra because of the annoying sound from the port many people have experienced this
@jessemichalies3 ай бұрын
Lol, why would I return a sub for one scene in a movie when it absolutely kicks ass. You'll get port noise with any ported sub.
@@jessemichalies pb 16 doesn't give ultra low bass properly, so there is a port chuffing problem, edge of tomorrow bass goes down to 10hz, but p16 ultra doesn't go below 20hz also i use Rythmik Fv15hp there is twice the difference between 16ultra but i didn't have any port problem Rythmik is a whole other level
@calrc1233 ай бұрын
My straps came to short. Now I have to find some longer straps
@MrPlutoz4 ай бұрын
I thought women say "size matters" 😂😂😂😂
@G__Mason4 ай бұрын
I’m looking at buying an ultimate now but wanna order the fox body for it to match my Losi DB Pro lol
@jessemichalies4 ай бұрын
The fox body is the best
@rileylehoe22325 ай бұрын
Love the colors badass
@Facts-R-Real5 ай бұрын
That orange isn’t bad but it’s not even close to what you were looking for. I completely agree. But I will say it’s cool orange it does at least match the orange rear piece and your leads.
@vorvudthi10075 ай бұрын
HI very helpful video ..but aren't the traxxas LEDs rated 16v for each front and rear? so your step down is outputing 16v to both so are you just essentially sending 8v to each LED which means their not at 100% brightness capacity?
@jessemichalies5 ай бұрын
No they're both get 16 volts
@jeffkennedy52575 ай бұрын
What are the measurements for the box. I was thinking of doing the same thing with my set up. Adding a console in the rear to go with the 10’s under my back seat. You have the specs for the box build?
@jessemichalies5 ай бұрын
I really was just trying to make it as big as possible in every dimension other then height
@jeffkennedy52575 ай бұрын
You have the measurements by chance or are you able to build another one?
@jessemichalies5 ай бұрын
No lol that box was a pain to build.
@jeffkennedy52575 ай бұрын
I could imagine, especially having to make sure the front console lids would open and close. I was thinking of a 16x15x 18 tall but doing as you did with the sides where it clears the front driver and passenger seats in the back for more space in the box. Will try some options out and see what I can do. But nice box How did that box blend with the box under your rear seat? And frequently interference ? Did either box drown or over power the other boxes bass or did it blend nicely?
@jessemichalies5 ай бұрын
@jeffkennedy5257 I don't hear any issues myself with the 2 boxes sense they are both sealed. The box with 3 is a lot louder than the 2 under the seat. I put the angles in the back top of the box so a person could still sit there and wrap their legs around it. If you find me on Facebook I can send you more pictures I've got of the build. I haven't watched this video in a while so I'm not sure what I put in the video.
@user-ln6hh3cu6y6 ай бұрын
Where are the bodies, Garth?
@qwik666 ай бұрын
Great video, thank you! Question…what ratcheting driver is that you’re using? I’ve tried looking for a slim one like that but haven’t had any luck.
@jessemichalies6 ай бұрын
They are snapon drivers
@qwik666 ай бұрын
Thanks! How does it handle with the weight of all the Vitavon additions?
@chasenelson81377 ай бұрын
Cant you adjust the settings on your phone?
@All-rc8047 ай бұрын
Would the lights work on 7.4v?
@jessemichalies7 ай бұрын
Possibly, but they would be nearly as bright
@nathanielflatt41297 ай бұрын
So question how has your vuatvon servo horn held up ive had 2gpm servo horns on my perfect pass and the servo has destroyed the teeth in both servo horn
@garrylewis23207 ай бұрын
Aside from an interesting and informative video, how did you get your XRT so clean outside and inside? When I disassemble mine, it’s full of dust and grit. (Rock quarry bashing). I just subscribed to your channel. Do you have a video on how to clean it up so well?
@jessemichalies7 ай бұрын
It was still brand new and I hDnt bashed it yet
@garrylewis23207 ай бұрын
@@jessemichalies Ok that explains it. Still a great video!
@craigmac15167 ай бұрын
use a small balloon it will stretch over and then tie the end around the wire with zip tie . using a light color like yellow or pink you should be able to see everything though the balloon itself.
@dougstevens22927 ай бұрын
Where are the bodies!
@Shellzwick8 ай бұрын
Does the truck feel much heavier ? My bulkhead broke exactly where you said people usually break it .
@jessemichalies8 ай бұрын
Yes, after all the vitavon upgrades, it is definitely heavier
@Shellzwick8 ай бұрын
@@jessemichalies I think imma save the extra weight for tire options .
@azbrown8219 ай бұрын
So you must have sold a kidney for those parts from Vitavon they're ridiculously expensive
@jessemichalies8 ай бұрын
They are definitely proud of them
@SilverC8andDroppedC109 ай бұрын
Looks nice. OPT7 makes some nice LEDs. Installed them in my C8. Love them.
@jessemichalies9 ай бұрын
I'm pretty impressed so far
@zacksmith876310 ай бұрын
Your servo saver is probably slipping.
@jessemichalies10 ай бұрын
It was i had to tighten it up
@TheRoggan12310 ай бұрын
Just finished upgrade of my XRT with Max6, Perfect Pass, HD saver spring (+ small spacer) and Spectrum RX/DX5Pro. Its a SIGNIFICANT boost in the speed and performance of the steering!!
@Xbot4Life7 ай бұрын
Hope its a MAx 6 G2 with the same power as a Max 5 instead of the old Max 6s
@brucebaker03163 ай бұрын
Max 6 g2 does 8.4v...
@BuffaloSoldier-tb9dn10 ай бұрын
How do you put on the straps
@BuffaloSoldier-tb9dn10 ай бұрын
Why don't you have full steering after the upgrade?
@jessemichalies10 ай бұрын
I had to tighten up the servo saver some more
@BuffaloSoldier-tb9dn10 ай бұрын
@@jessemichalies how do you tighten the stock servo saver?
@jessemichalies10 ай бұрын
You tighten the knurled ring down onto the spring more
@s1lentcalib3r10 ай бұрын
Nice shelf princess upgrading every part without it even touching dirt.
@pfunk7210 ай бұрын
😂😂😂
@D.hobbyist10 ай бұрын
they made this rc so easy to fix best build ever from traxxas😊
@uninkspillz11 ай бұрын
i see them RCs back there...
@loudspeakertestsmorebyaida380411 ай бұрын
Do you still own the PB16 Ultra? That’s a lot of shaking for a home theater subwoofer? Are they still going strong?
@jessemichalies11 ай бұрын
Yes, I do, and it's still going strong
@flaprepper11 ай бұрын
Awesome Video - thanks for sharing!!!
@jonathanryan2915 Жыл бұрын
Just like a Tesla
@jasonbrickman8065 Жыл бұрын
Quite the explosion
@jessemichalies Жыл бұрын
Yes it was lol l. The second one not so much
@lilredrc4719 Жыл бұрын
KILL IT WITH FIRE!!! 😂😂
@jessemichalies Жыл бұрын
Lol
@landen3859 Жыл бұрын
Will the quad blow up like that for to long?
@southernknight9983 Жыл бұрын
Cool! I came across two batteries like this on a used camper that I am getting and immediately saw issues with how they were wired. I did not see a current going through either battery as it was and two wires were disconnected. While I know how electricity works and flows, it looked like they were supposed to be linked as a series, but wanted to be sure I was linking them back together correctly. As soon as I saw how you connected them, it made complete sense. A no brainer at that point. Someone had delinked the two batteries from each other for what ever reason. Now I can handle the rest and likely need two new batteries. No sweat. Thanks!
@rmakin7832 Жыл бұрын
Can you send part numbers for all of these things you used the servo and the bracket please
@jessemichalies Жыл бұрын
You can find the perfect pass monster servo on Amazon. Vitavon has the bracket on there website
@basementracer7622 Жыл бұрын
Hey man, that is a great servo, I run mine at 8.5v on a Castle B.E.C. I did want to mention to you that in your video you didn't show the setup of your radio. Meaning, the servo that comes with the XRT is a mechanical servo, the perfect pass is a Brushless Digital Servo. You may need to tell your TX that the servo is digital as the default is always mechanical. Once I sussed that out on my Futaba system, that servo came to life. It was so much smoother and faster. At 8.5v, set up as digital that is an EPIC servo!
@jessemichalies Жыл бұрын
I'm pretty sure I have it setup right. I've got the flysky noble nb4 and have 2 of the perfect pass servos and a couple savox servos and a pro tech and haven't noticed any issues but maybe I haven't seen the pp servos full potential yet. I'll have to look into it
@jessemichalies Жыл бұрын
My slash I have a castle mamba x running a perfect pass ar 8.5 and it's insane compared to my xrt with the hobbywing only running at 7 .4 I figured the biggest difference is due to the tire size and weight
@basementracer7622 Жыл бұрын
@@jessemichalies You throw that bad boy in the XRT up to 8.5 my friend and those wheels and tires will be a problem no more. Cool vid and it's good to see a YTbr respond well to comments rather than being offended or insulted.
@robbiebeutlich2333 Жыл бұрын
What model # servo horn is this I would like to order one. Or post link if possible ?
@abemack11 ай бұрын
look up vitavon and search xrt servo horn
@robertphillips8596 Жыл бұрын
Thumbs down for the totally obnoxious music!👎 had to turn sound off so as to see the video!🤮
@penknight8532 Жыл бұрын
Where are the bodies buried?
@jrncarphotography6158 Жыл бұрын
if wife is not impressed you get bigger stuff ;D
@marycrumpton3806 Жыл бұрын
I have a ground wire from the camper along with the positive and negative wires (3 total). Where would you connect the ground?
@jessemichalies Жыл бұрын
I would groud the camper to the battery and ground the battery to the frame.
@thoselog Жыл бұрын
Man, this is the perfect video. Showed me exactly what I needed to see, no nonsense. Thanks.
@jessemichalies Жыл бұрын
I'm glad I could help you out
@Jackyl82334 Жыл бұрын
It’s nice to see a video of the whole job, not cut and edited and all the bits that you think should be simple cut out, well done. Did you start breaking pinions after putting in the Hobbywing ESC ?
@jessemichalies Жыл бұрын
I went through 2 pinions and a spur with the stock esc. I switched to b a Robinson Racing pinion and haven't replaced the gears since.