I have a TD8. If you can't find master link, you can put up on blocks under your bottom rollers, leave under idler unsupported, take grease zerk out, take a 4x4 between back of blade and idler then compress in. This should allow enough slack to roll tracks off idler.
@kenandchrissibernard285928 күн бұрын
Great job!
@bensanders7392Ай бұрын
This sounds like somebody who's established and has the option to get the brand name ones that are more if you so desire....not someone whos options are severely limited or, who is simply unable to get the other name brands, because they seem out of reach or unattainable. So owners or equipment operators who have the choice to get something else, still will opt to go with this.
@ArtietheArchonАй бұрын
tracked machines are crazy good on the rough stuff for sure. and more stable generally which is big. but if you actually need versatility it's wheels, you can put tracks on wheels but you can't put wheels on tracks. wheeled machines are often though not always quicker and more fuel efficient than tracked and when it comes to pushing snow you usually want wheels
@darwindropmazdaАй бұрын
Really sweet machine
@SouthernGradingLLCАй бұрын
Great info
@EastyUK2 ай бұрын
So cool, I have a 279d3 and searched before I picked up a few 4000lb blocks to see if it would lift them. It picked them up on the end of my forks with a chain no problem, but certainly a bit tip, so kept it low and slow. These machines are very capable.
@Rogue.Rider02 ай бұрын
Had did you slide the front out with carrier bearing still on? Also that shaft guard was an absolute nightmare trying to get out. I cut it out and it’s staying out. Also, you put that bearing on backwards.
@Rogue.Rider02 ай бұрын
Had did you slide the front out with carrier bearing still on? Also that shaft guard was an absolute nightmare trying to get out. I cut it out and it’s staying out.
@StarknightMT_official2 ай бұрын
Hello, Are you interested in testing our products? We would like to invite you to test the Scratch-Resistant Windshield for your Polaris Rzr xp1000 xp4 (if your car year is 2014-2018
@Rogue.Rider02 ай бұрын
I’ve always did it without pulling floorboards or even removing skid plates.
@robertd69252 ай бұрын
So the warranty is transferable?
@robertd69253 ай бұрын
Do you still have it? Hours on it? Any issue?
@joshuapuckett75433 ай бұрын
I watched a video fromn2 years ago when you bought the Sany, how is your opinion after two plus years of using it? Service, maintenance, anything broken or wore out?
@SadlonCattleCompany3 ай бұрын
Great machine no issues sold the 60 and got an 80 size sany. Use it everyday. I'll say though dealer.support is everything. I would go with the best dealer brand close to you. These aren't like cars w aftermarket support. When they tear up you need a sharp.mechanic. luckily sany and cat are close to me and they are top notch.
@stevecox1093 ай бұрын
I’m considering buying the Sany 60 and a 135. Have you had any track problem? I’ve heard the 60 has issues with the track coming off. Thanks in advance for all your insight.
@SadlonCattleCompany3 ай бұрын
If you know how to operate a machine and wear not to put it no track issues. I put a couple hundred hrs on the 60 . When you hear a pop back up. Any track machine can throw it on a stump or root. I never had one come of the 60 or the 80 yet knock on wood. Now a buddy bought a 60 and threw one at 20hrs. Of course he backed up on a stump. Had know clue how to make sure they were tight. 60 and a 135 would be sweet. The 80 for me is going amazing. Getting clearing jobs and still digging tights footers. Working out well. Dealer support is still everything know matter the brand you buy. I would definitely like a 30k machine if I keep clearing. But for now it's doing great.
@dirtguy65373 ай бұрын
What your saying is exactly right.
@reloadnorth77224 ай бұрын
Everything mechanical eventually breaks. But when you operate the equipment with skill and not aggression, anything will last a long time.
@chrisc.treemendous62444 ай бұрын
How big is the deck? 72"?
@MarkWilliam-pl6qs4 ай бұрын
You couldn't get me to buy something that is manufactured and owned by communist china!
@Steven-po8cu4 ай бұрын
Im not even in the confstruction feld or anything farming. Im an accountant but just stumbled upon your video randomly and started watching to unknown reason. I appreciate your honest review and not being biased just because its a Chinese company. Competition is good for innovation and driving the price lower.
@chipps10665 ай бұрын
You got to spin that motor on up for your torque converter transmission to work right!
@smokeymacpot765 ай бұрын
cant hear fuck all
@NLD3525 ай бұрын
Well done sir! I run Sany hoes all the time and I dont think theyre bad at all. Ive run everything from a little 35 up to a 365 and a 265 long reach. Theyre no Cat for sure but theyre pretty decent machines
@rjright73735 ай бұрын
Hey! Get some ear protection! Hey! HEY! HEYYYYYYY!! Ah phuck it!
@rjright73735 ай бұрын
That vibrato like rippled clang of metal rubbing against a rail turns me on! Reminds me of the sounds of a chain-gang with ball and shackle. Merci
@zx6rkawi095 ай бұрын
Thats how my wacker neusson st50 skid steer super easy to work on and powerful. Im looking at the sany 60 now
@2006mrderrickh5 ай бұрын
Nice video. Finally a video of someone actually running these machines and not just talking about them.
@SadlonCattleCompany5 ай бұрын
Thanks these track machine have literally changed the world lol. Everybody is moving dirt now. Like a zero turn lawn mower.
@2006mrderrickh5 ай бұрын
@SadlonCattleCompany Yes, indeed. I will start with a mini skid steer. I just need it for residential use.
@robertbradford78925 ай бұрын
Is that a full chisel chain?
@SadlonCattleCompany5 ай бұрын
Yes 3/8 chain. could drop the chain size down and it would do better
@jamesmccarty33265 ай бұрын
There’s no accounting for where. Or how far that projectile was going to go!
@terryhale90065 ай бұрын
Dang! I've got one just like it that's been hanging for three years. Fortunately, it's in an out-of-the-way location, so I can just leave it as a curiosity.
@ffemtx475 ай бұрын
Looks like it's STILL hanging to me. Widowmaker.
@SadlonCattleCompany5 ай бұрын
Lol rinse and repeat.
@mbradley2745 ай бұрын
Buy a lottery ticket
@martinhickman87475 ай бұрын
Who needs belts? Hire this guy!
@Lucasj19825 ай бұрын
A new sy80u nice !
@SadlonCattleCompany5 ай бұрын
Thanks very happy so far!
@rossh11526 ай бұрын
Good review. Give us an update or make another video !
@SadlonCattleCompany6 ай бұрын
Sold it ,went bigger machine.Ive talked to every brands sales rep and learned pretty quick dealer is what matters . A good dealer will work w you on price and repairs. Luckily I have a good sany dealer in my area. Also sany has a good name cause it sold fast to a guy in another state dealer honored warranty no issues.
@johnblue80296 ай бұрын
How’s the machine now running ??
@SadlonCattleCompany5 ай бұрын
Sold it and upgraded to a sany 80
@pfeifferized6 ай бұрын
It’s $68k now for an SY50U around here now. I agree with your points 100%! All these machines are the same now. I’m getting a SANY!
@guernseygoodness6 ай бұрын
For a dairy farmer, wheeled makes the most sense. Most Dairymen are on concrete 95% of the time and they are in cow manure. Much easier and faster cleaning cow manure off tires than track system guards, etc.
@frankgonzales24627 ай бұрын
Another bunch of drugstore trainers
@CarExpressions7 ай бұрын
Thanks for the video, good points about renting vs buying, I agree. I've never owned one and it is just personal use but after a lot of researching I think the 80 is a better choice for clearing big trees and lots of rock. It is a shame everything is made over seas but that's the reality.
@SadlonCattleCompany7 ай бұрын
Thanks. The 60 ain't far behind the 80. But for big stumps sometimes u just need that little bit more. 80 is definitely the middle ground that can about do it all.
@CarExpressions7 ай бұрын
I always like the expression "better to have and not need ,than need and not have"@@SadlonCattleCompany
@jaysantos5147 ай бұрын
Its amazing how some people will record a video on youtube and have absolutly no clue what they are talking about. track width has zero impact on machines ability to push thru a pile of dirt. hydraulic pump, final drive specs and valve relief settings are what determine machine ability to push. track width can cause you to loose traction or flotation but that is not what is happening here!
@user-tb1wq5hz3w7 ай бұрын
Wonder full
@jacoballen46298 ай бұрын
Only thing that you should think of and double cheack is if u buy from a auction site or even some dealers sany wont warranty the machines c and c eqipment made a recent video about some machines they bought on auction sites and come to find out most of the 5000hr warranty isnt transferable like most sites and dealers are claiming c and c eqipment soon learned after a guy bought one from them and needed a small repair done to machine with just couple hundred hrs on it sany would not warranty it at all because it went to a eqipment auction just something i seen online do your own cheacking in your local area before spending 60k on something with no warranty that you think is covered worth asking your local dealer ask them straight up i think alot of people who have bought them are about to soon find out depending on were they got it sany isnt gonna help you at all with it hope the people who do buy a sany at least are aware of what to cheack or ask their local guy in their area ask them were it came from buying it from real ligit sany dealership is best idea in this case no used eqipment sales auctions are not good option eather according to what ive seen maybe c and c eqipment isnt giveing the whole storie about buying used sany exavators but it would suck to buy one thinking you have 5000 hr transferable warranty to find out it has nothing because u bought it online or in a auction site like eqipment trader dont really have any thing against them i was even looking into them and maybe still would get one but would be more selective on from were i might buy it from make sure i do get the warranty that warranty could be worth 10s of thousands of dollars if a big issue arises before the hr or yrs are up thats my thoughts hope this can help someone heard the machines arnt horriable just be aware of this being a thing possably
@ForwardAssaultActual8 ай бұрын
How is the machine ??
@SadlonCattleCompany7 ай бұрын
Loved the machine. Someone wanted it more than me.Sold it . Bought another sany beat everyones prices and i bought a sy80 20k pounds. Been happy with sany so far.
@White-Scorpion978 ай бұрын
Groundwork ... Ever heard of it? Obviously you have not from this video. Awful horsemanship, and learn how to ride, instead of beating up your horses mouth. Jc....
@rileycoble58428 ай бұрын
So glad I don’t have one of those drivers anymore. Get a danuser for the front of a skid and you’ll never look back
@phillipoliver21068 ай бұрын
What about the tracks that go over the wheels vs a tracked machine. Would that option lead you more towards a wheeled machine.