Thanks for this down to earth “Rolling and Tipping” video as it really helped me understand why you tip: It’s to get rid of all those pesky tiny bubbles that form on the surface. This is the first video which has specifically mentioned the little tiny bubbles that were appearing in my two pack linear polyurethane top coat when rolling. Just for the record, I was using an Australian manufactured polyurethane called Norglass. I thought I could just roll and it on. WRONG. I subsequently got frustrated when I noticed all these minuscule bubbles forming. Fortunately, it was just the first top coat so I think I have been able to sand them out using 400 grit wet and dry. The bubbles, interestingly enough, we’re not forming everywhere, just in a few spots. I don’t know why that that was. Anyway, you solved the mystery for me. You were the first youtube video -and I’ve watched many- to mention this this fact. Ie. Tipping is necessary when you use a roller to get rid of all the tiny surface bubbles that look like they could be specks of dust. They are just that small bubbles but that are not dust they are just bubbles which can be “tipped” out with a brush. Cheers and Thanks Again Sandy B Coochiemudlo Island Australia
@leoncaputolan14 сағат бұрын
I am glad mate ..good luck with your next roll and tip project...cheers👍👍
@SailingEsperanza2 күн бұрын
awesome - well done. looks great.
@leoncaputolan2 күн бұрын
Thank you 👍👍
@zoransusak23543 күн бұрын
Hello. Nice video and many thanks for chisel idea. Working in sail boats charter 21 season and it newer did cross mine mind even chisel is mine favorite tool. I personally do not like oil on teak and if you ask me what do I use and would recommend it is Höveling Golden Teak Sealer. Yes, it has yellowish tint but that's exactly why I love it.
@leoncaputolan2 күн бұрын
Thanks for the recommendation..I will keep an eye on that particular brand and give it a try...
@leoncaputolan2 күн бұрын
I was just experimenting this one..me myself doesn't really like putting oil too on the deck, there will be a lot of maintenance...I will see if this is sustainable,then maybe do the whole boat hehe.
@johnclayton21013 күн бұрын
Hello Leo. My wife is a beautiful Filipina from Pasay City. Married 33 years! I just bought a 1984 Chris Craft Commander 315 in May of this year. It is a 31 foot sport fishing boat with lots of Teak capping rails and swim deck and pulpit at the bow of the boat. I LOVE LEARNING from you! Thank you so much for your videos. I am a subscriber now. I'm going to finish my outside Teak with AWLGRIP, as you show in this video. My boat's Teak has old varnish an Grey exposed wood. I will use scrapers and 220 grit to prep the wood before the varnish. But how do I get rid of the Grey color before varnishing? I don't want to aggressively sand away the Grey. Any advice? Thank you and kind regards.
@leoncaputolan3 күн бұрын
Hello mate...if the teak is very weathered you will going to have to sand it aggressively you will need to sand it down well until you get rid of all the weathed greyish part of the teak,start getting off the old coating if it has...then start sanding it with 80 grit sandpaper then 150 the 220 grit before your buildup coat..this varnish I am using on this video is only to be used as top coat..do not use this varnish on bare wood because it will not work...the varnish you can use to build up is called AWSPAR it is a product by Awlgrip...put about ten coats of that build up coat of AWSPAR..but the more the better, but it all depends of how satisfied you are..then you can use the varnish I use in this video..as the top coat about 3 coats for best results..
@Gunesbas4 күн бұрын
what about "teak wonder" it stays quite long (around 2 months) but I dont know the one that you used. I also heard SEMCO but I dont know if all these are the same or not if you used any of them I would be happy to hear your experiences. Thx for the videos
@leoncaputolan3 күн бұрын
Yahh I heard a few good thing about teak wonder, I was going to buy a small tin of it and use it for this project, but I was a bit hesitant, so I end up using the one I have .. the tried and tested on our furnitures but not on the deck, about the Semco I actually tried ansmall area on our previous tender but I did not like the strong smell of it and the slight yellowish tint, it look a bit unnatural.
@Gunesbas3 күн бұрын
@@leoncaputolan got it thanks a lot
@horationelson38234 күн бұрын
Looks great
@leoncaputolan4 күн бұрын
Thank you...👍👍
@Mr2perc5 күн бұрын
Nice vid man!
@leoncaputolan5 күн бұрын
Thanks mate..
@willienelson10858 күн бұрын
Leon said this was a 2-part varnish, but what brand and mix ratio? Thanks! ( maybe I missed it )
@leoncaputolan6 күн бұрын
Hello mate... actually this is 3 part varnish, I said in the video two part because I am used to another urethane varnish that I use a while back ..this particular varnish I used here is called Awlbrite this has to be mixe together with its converter and brushing activator..the mixing ratio is 2 part: Base J3005 1 part: Converter J3006 1/2 part : Brushing activator A0031. Hope this helps....
@juvyyaun611010 күн бұрын
Please .may I know the whole details
@juvyyaun611010 күн бұрын
Pwd ba kaming magdala Ang foods at kami na Ang mag cook
@juvyyaun611010 күн бұрын
Magkano Ang rent sa beach house per xay
@juvyyaun611010 күн бұрын
Pwd ba mag inquire Dito sa beach house
@boatfire-gx7eb14 күн бұрын
Beautiful video and superb editing. I showed it to my wife also. It looked great on my 85-inch TV and now we want to visit and see it in person.
@leoncaputolan14 күн бұрын
Thanks...I'm glad you guys enjoyed it.🙏
@candelamosquerabell501214 күн бұрын
What an amazing images Leon, they are breathtaking.
@leoncaputolan14 күн бұрын
Thanks Candela..
@Mr2perc16 күн бұрын
I'm an apprentice painter/custom work, you remind me of my boss. He's one of the best painters/custom house work in the US west. Whenever he teaches something I'm glued on whatever he telling me. You got me glued to this. All your prep techniques and rolling while back brushing looks awesome. You must be one of the best out there with refinishing and fixing patches on yachts.
@leoncaputolan16 күн бұрын
Thanks for the kind words..🙏👍
@Mr2perc16 күн бұрын
Are you sanding before you start the varnish or can you just place it over the old stuff
@leoncaputolan16 күн бұрын
I sanded it with 320 grit sandpaper...or you can scuff it with that fine maroon color scotch pad ..
@jessjess45918 күн бұрын
WOW 🤩
@leoncaputolan18 күн бұрын
Thanks Jess
@travelwithxavier18 күн бұрын
Wow Wow Wow Man great job on the filming and editing , lots of this footage can be sold online man , thank you for sharing
@leoncaputolan18 күн бұрын
Thanks mate ..
@eprohoda19 күн бұрын
Leon~ Like,gorgeous drone, :))
@leoncaputolan19 күн бұрын
Thanks..I'm glad you liked it!
@maquimaiop20 күн бұрын
Nice one mate
@leoncaputolan19 күн бұрын
Thanks👍
@mckeem108021 күн бұрын
Leon, before you scrape with your profile tool, the first time you should spray the surface with the water. That will prevent the excess from getting on the window and the frame. it will still leave you with a perfect bead just like you finished, but you won’t have to wait and clean it up later.
@leoncaputolan21 күн бұрын
thank you, my next video will be the one using this technique.
@loveandLaughs217721 күн бұрын
Transported to paradise by these breathtaking views! SUperb editing skills👏💪👌😍 ✨ #Wanderlust
@leoncaputolan19 күн бұрын
Thanks a lot🤗
@deirdredooling943622 күн бұрын
What is in the spray bottle? And what does it do on your 3rd pass?
@NicolePedraja24 күн бұрын
awesome kuya Leon....
@leoncaputolan23 күн бұрын
Thank you 🙏
@ericpohl212526 күн бұрын
like the poney tail
@leoncaputolan26 күн бұрын
Haha... thanks mate..👍👍
@loveandLaughs2177Ай бұрын
Wow😮 Can't wait to see more epic journeys like this! Mingaw ko ana na mga lugara grabe....so serene and breathtaking. 😍
@leoncaputolanАй бұрын
Thanks ...one day you will see this places again😉
@tarafisher3828Ай бұрын
So cool Leon!!😊
@leoncaputolanАй бұрын
Thanks 😊... glad you enjoyed it..
@MUSICANDNATURE-dr1krАй бұрын
🤩🤩
@leoncaputolanАй бұрын
Thanks
@loveandLaughs2177Ай бұрын
Nice😍😍😍
@leoncaputolanАй бұрын
Thanks
@loveandLaughs2177Ай бұрын
😍😍😍
@leoncaputolanАй бұрын
Thanks
@loveandLaughs2177Ай бұрын
Wow, the Port of Capri is pure chaos in the best way! Like watching a high-stakes game of nautical Tetris hehe So cool to watch😁
@leoncaputolanАй бұрын
Indeed..thanks for watching 🙂
@travelwithxavierАй бұрын
nice vlog Mate great editing , hope you are well and enjoying life . Amping✌✌
@leoncaputolanАй бұрын
Thanks mate, all well here, hope to see you in the Philippines when got to go for my holiday,...Amping mate.
@johnstone3836Ай бұрын
Thanks This is Helpful
@leoncaputolanАй бұрын
You are welcome...
@loveandLaughs2177Ай бұрын
😍😍😍
@leoncaputolanАй бұрын
👍👍
@MenorcatoursАй бұрын
The best port in the world
@leoncaputolanАй бұрын
Absolutely..one of the best natural harbour I have seen.
@leoncaputolanАй бұрын
Comment down below if you know the name of this sailboat...such a beauty😊
@maquimaiopАй бұрын
Keep them coming!!
@leoncaputolanАй бұрын
Ohh yesss
@6T03SАй бұрын
uy sayang Boss Homeport namin jan,,,, andito na kami Greece maka meet and greet sana =)
@leoncaputolanАй бұрын
Oo sayang...meet and greet Sana,next time nlang.. hopefully 👍😉
@ReelJEM.Ай бұрын
What are your all your sanding steps and do you do any more sanding after applying the varnish or primer or clear coat?
@leoncaputolanАй бұрын
We sanded this capping rail with 320 grit sandpaper prior to varnishing, this is only a top up coat just before our summer season start...
@damiantromp5205Ай бұрын
Hey mate, we are looking for someone to do our yachts Capping Rails. 75m currently in the Med, are you available?
@leoncaputolanАй бұрын
I have a full time job mate..but if you are in Palma I know someone that can recommend to you.
@damiantromp5205Ай бұрын
@@leoncaputolan yes please, could you send me his details? Thank you sir
@markgarvin274Ай бұрын
Brilliant video Leon - captures the essence of this lifestyle.
@leoncaputolanАй бұрын
Thanks Marky...
@loveandLaughs2177Ай бұрын
OMG, jaw-dropping stuff! Mark Zuckerberg's yacht game is on another level! Living that billionaire life must be unreal. Just dreaming big over here! 🤩😅🚤💸"
@leoncaputolanАй бұрын
Ohhh yahhh Sana all billionaires😜
@loveandLaughs2177Ай бұрын
Hey, living it up on the high seas, Your journey looks like an absolute blast - loving the vibes and the views! Can't wait to catch up and hear all about your sailing escapades hehe.
@leoncaputolanАй бұрын
Thanks a lot😊
@tombucklin8413Ай бұрын
Can I apply the 2 part awlbrite over the top of epifanes?
@leoncaputolanАй бұрын
Yes you can...i have done it many times, just make sure your one part epifanes is well cured before you varnish over with the awlbrite.
@exia41712 ай бұрын
Saang dock po yan idol?
@leoncaputolan2 ай бұрын
Sa Palma de Mallorca idol...👍👍
@MonycaMarini2 ай бұрын
Esagerato.
@leoncaputolanАй бұрын
Ohh yahh
@xtabuasx2 ай бұрын
How many time and money do you spend?
@leoncaputolan2 ай бұрын
I am not sure about time, but about the money I don't spend any because I work on the boat, I am part of the rlthe crew.
@loveandLaughs21772 ай бұрын
Wow, that was intense! Washing the boat from a blood rain - talk about a dramatic way to get it clean! 😱💦
@leoncaputolan2 ай бұрын
Pag sure 😁...I was gonna cry when I saw the muck the following morning 🤣🤣
@loveandLaughs21772 ай бұрын
@@leoncaputolan 😂✌️💪👌
@darrenedmonds11632 ай бұрын
We get dust storms every 5 years or so in Canberra. That dust was very sticky
@leoncaputolan2 ай бұрын
I'm sure the dust storm there Down Under it gets bad! That scene on that last Mad Max movie is epic, not sure if it gets that bad in real life😁
@darrenedmonds11632 ай бұрын
@@leoncaputolan our deserts are full of poisonous heavy metals. Your boat acted like a magnet and captured heavy metals. Thanks so much
@markgarvin2742 ай бұрын
My sympathies Leon, seen a few of those - but that looks really bad.
@leoncaputolan2 ай бұрын
Yahh mate, this one is the heaviest I've seen so far..I guess it will going to get worst..
@markgarvin2742 ай бұрын
@@leoncaputolan I remember waking up to that a few times on the morning of a charter! Not fun!