That was possibly the most uninformative video I've ever watched.
@Druze_Tito4 ай бұрын
WTF is with all these Koreans in the comment section as if the video has anything to do with Korea. Out of all videos on KZfaq, this is the first one "plagued" with Koreans
@NylonMusk나일론머스크4 ай бұрын
I understand ... They are just too full of national pride. Yes I am also Korean, and I get why Koreans are commenting cuz it's the home of heated floor since 300 BC.... Well I get why they are so hyped for this and proud of traditional Korean technology spreading across the world and being the most efficient heating solution, but it's just too much. All countries have this kind of national pride stuff and some have too much. They are the problems not Korean.
@Druze_Tito4 ай бұрын
@@NylonMusk나일론머스크 I understand the pride. What I don't understand is that there are only Koreans in the comment section, as if there are no others. Nothing against Korea, I highly respect it and its people.
@mikej2608 Жыл бұрын
Is shortest hight size of the staples 40mm ? I’m at a stage to lay 25mm or 40mm insulation boards ! Is possible to get 25mm staples?
@maurifederi5817 Жыл бұрын
Hi. Is it posible to heat shower floor? And all bathroom?
@viorelpanait4000 Жыл бұрын
Guys can you use porcelain tiles-on top of them insulation boards or only laminate or vinyl? Thanks
@plamenfilev5696 Жыл бұрын
Must use device for pipe
@khushikothari2440 Жыл бұрын
The music made it even more interesting
@Guide5042 жыл бұрын
CONTINAL OR CONTINENTAL?
@Monaleenian2 жыл бұрын
Continental or Continal??
@Monaleenian2 жыл бұрын
Never mind. I see from a response to one of the comments below that there was a name change from Continental to Continal
@alexandrepaquette91212 жыл бұрын
Beautiful install mate
@thomasschafer72682 жыл бұрын
1000s liter of water coming in your dry house.🙈🙈🙈
@user-cv5iy6xf6j2 жыл бұрын
how rich England healed, although it’s not clear what they produce themselves, neither gas nor oil they themselves have)
@davitmartashvili17452 жыл бұрын
Hi. How/where can I buy this tool?? please, give me an advise.
@ContinalUnderfloorHeating2 жыл бұрын
Hi Davit, This is available to purchase from us direct. You can see our full range of tools on our website: www.continal.co.uk/ufh-products/underfloor-heating-tools Please contact one of our team on: 0333 800 1750 to find out more about how we can help you with your purchase. Thank you
@Manandwah2 жыл бұрын
Hi there looking to purchase a underfloor heating tacker for a continental UFHS. Could you please advise weather all tackers are compatible with all clips regardless of brand?
@shk52532 жыл бұрын
온돌
@pawelpisarek38622 жыл бұрын
Why before concreting wasn't pressure check done? I have read that's very important.
@ContinalUnderfloorHeating2 жыл бұрын
Hi there, This time-lapse video shows the laying of an underfloor heating screed system. The installers are a company that specialise in screed, they had pressure tested the system prior to screed being laid (just not shown). Pressure testing is important to do and should also be done for a second time prior to commisioning the system. If you have any other questions, please feel free to contact our team on: 0333 800 1750 Thank you.
@nickgeorgie19572 жыл бұрын
Is it Continal or Continental?
@ContinalUnderfloorHeating2 жыл бұрын
The name changed to Continal, but our service is still the same. Visit our website on: www.continal.co.uk
@camellia86252 жыл бұрын
Do you do first floor underfloor wet heating systems?
@ContinalUnderfloorHeating2 жыл бұрын
Hi there, if you would like to contact one of our specialist team on: 0333 800 1750. They will be able to help you with the best system for your project.
@sleepingwarrior46182 жыл бұрын
If you have the whole floor radiating out an even heat, this seems more efficient than a radiator as the surface area is so big? The air is warmed right above the floor and this is where the cold sits.... by directly convecting from the floor, does this lower bills by having a lower temperature and a much bigger surface area? Or am I over estimating the efficiency?
@ContinalUnderfloorHeating2 жыл бұрын
On the whole underfloor heating is approximately 25% - 30% more efficient than radiators. This is due to the larger surface area being heated and a lower flow temperature used. Feel free to get in contact with our team, we will aim to answer any questions you may have. 0333 800 1750
@mushtaaqheatingandcoolings96122 жыл бұрын
Hello sir
@maestrovso2 жыл бұрын
Wotan and Erda would approve the installation in the Valhalla.
@reynardpark93622 жыл бұрын
It feels overwhelmed to see this system. =)
@michaelbalfour31702 жыл бұрын
That house in not nearly airtight enough to think about underfloor heating. I'd recommend some expanding foam in the gaps, that will fix the problem 😛
@karlvandago16222 жыл бұрын
Nice music!!
@liamtaylor51223 жыл бұрын
good job
@collectsoulpleasure18003 жыл бұрын
Nice video.👌 Thanks for sharing,Stay Blessed.🥰
@zakkychan1233 жыл бұрын
Thanks for the great video. My question is what would you put over the top of the spreader plates as a flooring which is suitable for heat transfer? Would an 18mm chipboard t&g flooring be ok? Then on top of that would be underlay and then laminate flooring. Cheers
@ContinalUnderfloorHeating3 жыл бұрын
Yes, it would be perfectly fine to use an 18mm chipboard flooring with underlay and laminate. If you require more information, please give us a call on 0333 800 1750.
@remismar4416 Жыл бұрын
Dont.. Had that and it was crap. Almost no heat coming through at all. Wood becomes insulator unfortunately...
@snowboard92926 ай бұрын
@@remismar4416 Hi, did you install the spreader plate system? I'm looking at potentially buying and installing it at my house renovation.
@eXRe4per6 ай бұрын
@@snowboard9292 Let me know what you decide to do, I'm researching different ideas myself
@snowboard92926 ай бұрын
I think it will be the spreader plates but would just like to know how effective they are!@@eXRe4per
@MrRob19043 жыл бұрын
What depth do you need?
@ContinalUnderfloorHeating3 жыл бұрын
Hi Rob, the recommended depths for screed are 75mm for a standard site mix or 65mm for a pumped liquid screed. However, it is always worth checking with the supplier if different depths are required. If you require more information, please give us a call on 0333 800 1750.
@irajmajidi3 жыл бұрын
Good job❤️
@EPCRh3 жыл бұрын
What happens if you get even one small leak?
@ContinalUnderfloorHeating3 жыл бұрын
Hi there, In this situation, the pipe would need to be repaired with a coupler that we can provide. We would recommend replacing the loop though as it would reduce any issues that joining pipe may cause. When the repair is completed a full pressure test would be required. If you have any further questions please feel free to contact us through our website: www.ufh.co.uk or by phone: 0333 800 1750
@goodman-kor Жыл бұрын
More than 10 million korean houses use this system several decades. but leak problem is very very rare. Trust this system.
@madafakazmadafakaz3 жыл бұрын
Mark Zuckerberg of heating system installation
@swl50463 жыл бұрын
This is same korean houses. Most of korean house have this sistem.
@haithamabouzaid81613 жыл бұрын
Finely lecture
@user-uf8yr8xx5d3 жыл бұрын
This is korean `ondol~`
@sardorbek63993 жыл бұрын
Nice work
@ronb83023 жыл бұрын
Continental or continal which is correct ?
@ContinalUnderfloorHeating3 жыл бұрын
Hi there Ron, We are now Continal underfloor. Nothing has changed, except the name. Visit our website to be sure for yourself, www.ufh.co.uk
@lku4213 жыл бұрын
Does anybody know if they use this system in Korea?
@princewillip3 жыл бұрын
Is there any disadvantage of placing a LVP directly on top? (I can put underlay also if this is needed).
@ContinalUnderfloorHeating3 жыл бұрын
Hi there, LVP cannot be laid directly onto Slimfix® unless it is 6mm plus in thickness. Why don't you give one of our team a call on 0333 800 1750
@rajatbhardwaj91803 жыл бұрын
Is thare any carbon monoxide issue due to this system??
@ContinalUnderfloorHeating3 жыл бұрын
Hi there, Carbon monoxide is no issue with ufh system as it is produced by a direct heat source such as boilers
@frankmerion95583 жыл бұрын
That was a great video. But a serious question. Isn't the person rolling the tubes on the floor going to fuck up his back after a few projects? My back hurts from watching this video. Although it was informative.
@zedman4423 жыл бұрын
With an existing solid floor with no insulation would this still be effective?
@ContinalUnderfloorHeating3 жыл бұрын
Hi there, why don't you give one of our team a call on 0333 800 1750, we can help you with your project.
@kevingineer56103 жыл бұрын
Check out my VRF Installation video 🤗 kzfaq.info/get/bejne/Y8x3etGAmsjDn40.html
@getexbackguide5704 жыл бұрын
In case if any of the pipes leakes out under floor how you are going to fix it?
@alexandrepaquette91212 жыл бұрын
You leave the system under pressure until concrete is poured. And no joints allowed on loops also to optimize the flow. Never had a leak or heard of one in 25years.
@hddjdjdhdhdxj59044 жыл бұрын
Is there a cooling system similar to this system?
@dezlmao3 жыл бұрын
yes! its the radiant cooling system
@oposumas20713 жыл бұрын
it is possible to use the exact same pipes. But You cant have both, heating and cooling at once. Few challenges may arise. You have to control temperature 18c degrees is the bottom what you can reach. You can find few tutorials on how you can combine this system with an air conditionier. Obviously, there is a lot of controversy in doing so. But from few happy users, I can tell that it is doable if installed properly.
@kjjan18014 жыл бұрын
How many!?
@chicofoxo4 жыл бұрын
I'm thinking subfloor over the aluplates... 6mm floor grade plywood then thin carpet underlay, then thin carpet? Or can I put the underlay on directly? If I was going to go with glue-down LVT, once again, is the best option the 6mm floor grade plywood?
@menphues4 жыл бұрын
What is the difference between this and the heating Matt things. This is a larger pipe and spaced more apart but difference in efficiency? Heat wise etc? Can we see that
@user-br8ir7qq2u4 жыл бұрын
Nico 🙋♂️👍👍
@paulmckenna59384 жыл бұрын
can do it on your own with a decent dispenser
@ContinalUnderfloorHeating4 жыл бұрын
Hi Paul, thanks for the comment. You're correct, using our Pipe Decoiler makes the job quick and easy for a single installer. Learn more here: www.ufh.co.uk/products/underfloor-heating-tools
@nappanapoli84004 жыл бұрын
So there’s not walls in that house . How will they secure a timber stud wall without hitting a water line ? It’s a scary thought