A small update: Been doing phy therapy for about month 1/2 now. The pain is getting better and my recovery time seems reduced quite a bit. However I'm still having issues. They said it could be up to 6 months before they really know if the therapy is helping. It is either a muscular skeletal issue or something called Miserable Misalignment Syndrome, which would mean my femur or my tibia or both are rotated. The Femur rotated inwards and the Tibia rotated outwards, which causes the issues with my ankle and knee.
@gregzucconi2005Ай бұрын
Took.clip out now washer wont do anything 😂
@serenabean4Ай бұрын
Thank you! This trick saved me!
@vidashramjit54992 ай бұрын
I sorry they bought a whirlpool washing machine . Door problems lol
@coolhluke80892 ай бұрын
HELL WITH THAT. I BROKE THE HELL OUT OF THAT THING.... I want to by pass It completely. I have 4 wires blueRed yellow and white what do I do
@cassygrace933 ай бұрын
So things like that can be cause by a deformity in your tibia or femur. They tilt outward causing your ankle to turn outward. OR you have tight muscles. A doc/physio will help determine which it is and give you the best exercises to help relieve the pain. Good luck.
@danh4133 ай бұрын
I think you could be on to something. The tendon or muscle connecting my ankle to my knee going up the back of my right leg is extremely tight. I got a consultation with a psychical therapist scheduled on Friday. Thanks for the suggestions!
@jeremiahr95012 ай бұрын
The sensations your talking about follow the L4 dermatome of a nerve. KZfaq how to do L4 nerve flossing/neurodynamics. It's not THE BEST supported by evidence but a lot of chiros and physio's use it, so I think it's worth a shot. Let me know if it helps!
This video saved my marriage!!! Just kidding, we divorced anyway… but my washer works again! Thanks Dr Phil! 😂
@ShepardThomas3 ай бұрын
7 years later and this video still comes in clutch. We can now have clean clothes!
@gonzalez48043 ай бұрын
I have an amana model NTW4516FW4 and I had this problem just remove the plastic click that comes out in the minute 4:56 just remove it I put the cover back and plug it and ready thank you very much!
@amypedigo52864 ай бұрын
I did this and it still wont work bc there are only certain times the lid is to be locked when washing. So with it locked the whole time it won’t work. Or hasn’t for me anyway.
@stephaniececrle51854 ай бұрын
This does not work if there is corrosion on any of the main terminals. The metal that connects to the main wires. Other than that fact and the 90’s type wobble with the filming. This was still the most helpful after 15 other videos and I was fortunate to drain and spin out the cycle of needed towels. Have to get a new lock mechanism set because of the stupid corrosion. That being said. Props dude. And thank you.
@righteouspatriot25165 ай бұрын
Will it work if u just tie red & blue together..??
@Chrisrobba5 ай бұрын
3:20 I just took out the black plastic piece below the red wire so the metal would stay touching. Now the lid thinks it’s always locked. I was a little worried about safety but if you lift the lid the washer stops at least on my model. This video pointed me in the right direction
@750schimel5 ай бұрын
Vouch for this. Just did it yesterday on my kenmore series 100 he. Ran a few loads so far with no issues. Turns off when you lift the lid and starts back up when you close it
@qwencyvalentino55675 ай бұрын
Best Video on KZfaq thank you man spent 15 hours at this washer and spent bunch on money only this fixed it
@Chrisrobba5 ай бұрын
Glad I found it in the first hour but I’ve felt that pain on other issues 😂
@dawn95315 ай бұрын
This actually worked!
@wayneklayman17936 ай бұрын
Horrible video! Certainly not for beginners.
@shanea20407 ай бұрын
It worked! 🙌🏼 thanks man!
@coreypagan4359 ай бұрын
Your a lifesaver this video saved me a chunk of change 👍🏻🤑
@flightmizzarc9 ай бұрын
How do I get the metal out bro
@Dooguy10 ай бұрын
Removing this part did not help me on my kenmore 110 series washer. Since I did this now i have a lid lock code F5 E1 so now i have more issues. NOt reccomend people do this.
@toshcalix11 ай бұрын
Really annoying that you don’t show how to take the piece that’s broken out, and just show how to put it back together. Please make a new video since that’s the most important step
@howieb6956 Жыл бұрын
Which one of those wires is the ground?
@Screwpipe669 Жыл бұрын
So far so good!! You saved me from buying a new washer! Things been going strong for 8 years and I really don’t want to buy a new one so very happy with this fix!
@BanditRider8611 ай бұрын
So u just did what he did in the video and put it together? Mine still just clicks like before
@kennethdante Жыл бұрын
they legit make these so a human needs three people to take this little thing apart... 6 plastic tension clips. Incredible.
@lizardking944 Жыл бұрын
I just did this & it works now thank you 🍻 🫱🏻🫲🏼
@lutrahan3319 Жыл бұрын
Thank you!
@johnzaino4444 Жыл бұрын
Haha this actually works!!!!! Just fixed my washer with this trick!!! Wooooo
@nauip Жыл бұрын
Didn't work for me, unfortunately. I think it was the solenoid that crapped out on me. It was clicking, but maybe it wasn't clicking enough to trigger the lock since my lid would never lock.
@BanditRider8611 ай бұрын
Yep same didn't work
@MrLahey69 Жыл бұрын
Terrible video
@cubehire3653 Жыл бұрын
Maybe however I have a glass door which maybe a different animal.
@ashleywright5178 Жыл бұрын
Please help. I have the whirlpool W1046834. Broke plastic piece that holds that metal clip. Repaired the broken plastic and removed clip.... Then a buddy decided that he'd by-pass the locking mechanism by removing the entire lock mechanism and just attaching the wires how he thought they were supposed to go.. Now, you've guessed it, it does not work. If I am able to put it all back together how it was before do you think it will work properly? Is it safe since he has done touched all the wires together in various ways ?
@ivyave2346 Жыл бұрын
Muchas gracias, me ha servido mucho. Bendiciones
@djipreview Жыл бұрын
Can you not just cut the wires and splice them together?
@DrGoldenFlap Жыл бұрын
Thank god for your video even 6 years later still helping people!!
@jessicabartlett4907 Жыл бұрын
YOU ROCK!! THANK U! This video not only helped me be able to complete a full cycle with my washer... But soo glad u had the diagram of the inside of that dang switch... Because yah once I popped that housing off ... Had no clue how the hell to put that lil plastic mechanism back .. 😂❤🎉
@Duckyou555 Жыл бұрын
This did not work at all. The damn thing still continues to start for a second then clicks multiple times then stops till you unplug and try to start again and you get the same thing
@danh413 Жыл бұрын
Check the comment from Roop from 1 month ago (sort by newest first). Their comment may help you. I just knew what worked for me, but his comment has a bit more technical advice on the locking mechanism that may solve your problem. Best of luck!
@P-willie Жыл бұрын
This really helped me I followed step by step like you said you just need to remove that metal clip put everything back and your good to go I really appreciate you making this video I subscribed I can’t wait to see more helpful videos again thank you very much stay awesome brother!!! 🌊🔥⚔️🛡️
@roop5318 Жыл бұрын
This video itself did not work for my wtw5000dw2 with a flashing lock light, but it did help me fix it: At 4:10 in this video, directly left of the solenoid you see an angled piece of metal. This is part of a mechanism that detects the door being closed. The white plastic which pushes on this switch mechanism was broken in my washer. If I manually move the broken piece of plastic I can see it causes two pieces of metal to touch. What I did was forced this switch closed, by forcing the two pieces of metal touch. This fixed my lock light flashing. Right after this I was able to use this washer again. kzfaq.info/get/bejne/lbSPjKaEs-DNiJc.html has a video of the manual which was also very helpful.
@danh413 Жыл бұрын
May people find this comment, because I know that is a common problem and I did not know how to fix it. I just knew what worked for me. Thanks for sharing that extremely valuable info. Anything we can do to fix more washers for free is awesome!
@samantadelarosa5482 Жыл бұрын
So far so good 😊
@markwynkoop4916 Жыл бұрын
Instead of “arcconf getlogs 1 device tabular”, you can do “arcconf getlogs 1 dead” and that will show you the history of failed drives and when they failed along with serial number, etc. This is handy when a drive fails and it just shows missing in the LD list and you need to make sure you have the correct serial number to replace.
@johnbischoff5862 Жыл бұрын
My latch broke in a different place but this still fixed it!! Thanks! $100 saved!
@6753rags Жыл бұрын
Followed the video ,took it apart , removed the clip and my lid still locks!!!
@danh413 Жыл бұрын
If the lock is working still just remove the latch from the top of the washer door and then leave it in the latch hole. If its not attached to the door then it can't lock :D
@thecrystal0915 Жыл бұрын
Thank you!!! Luckily I had a part to practice with and a part to actually "fix" my machine!
@colinroach9276 Жыл бұрын
It doesn't work
@megonelson5575 Жыл бұрын
My lid lock keeps flashing on and off when I remove the metal clip my washer is lock can someone tell me a fix please
@danh413 Жыл бұрын
Hey sorry that didn't fix it. Check the comment from Roop from 1 month ago (sort by newest first). Their comment may help you. I just knew what worked for me, but his comment has a bit more technical advice on the locking mechanism that may solve your problem. Best of luck!
@shark70007000 Жыл бұрын
I seemed to miss the part on how you got that piece out. I finally got the end piece off, so I could get the othe part out. Thank you.
@stevenhoyt1918 Жыл бұрын
Worked for me!! Thanks! New mechanism on the way but was able to so our clothes until it comes in!