can you explain why you inverted the lower jaw scan before you moved it?
@rdgd1rd7 ай бұрын
But it so much faster and cheaper a suck down or light cure base plate . I 3d print but never found it doing a baseplate in 3d resin convenient but good tutorial.
@user-sp4bl3wl6d Жыл бұрын
1:50
@deriandrian4994 Жыл бұрын
How to instalation in model?
@look4wind Жыл бұрын
Thanks for video! What materials for print temp. you use now?
@georgesgeisinger9433 Жыл бұрын
👍👏✌️
@abdulhadialhelwani951 Жыл бұрын
We need more of those jushua . Great explanation 🤩
@rosschapman5389 Жыл бұрын
Skills ❤
@edbroggi Жыл бұрын
Do you do any courses on this?
@muhamadsaeedd Жыл бұрын
thanks so much for this 😍😍
@adamrutherford7169 Жыл бұрын
With 3.1 released, is it still easiest to design a denture using the partial module?
@eduesqui2 жыл бұрын
Hi Joshua One question. Is it possible to make a partial denture with the complete denture module?
@fadyissa83222 жыл бұрын
How did you make the block out file ?
@MDT-Ahmad-Kaawach2 жыл бұрын
good job but how we can scan complete denture ?
@sarasadiq20472 жыл бұрын
Plz tell me how to design immediate denture base plate separately and tooth separately. Plz make complete vedio
@shaiksameernml2 жыл бұрын
Hi sir can you send me the Digital Scans I have to Practice
@hatadahiro8682 жыл бұрын
I finally Found out!
@rafkos552 жыл бұрын
What kind of design you choose when you start the design of this?
@AxolotlArt123 жыл бұрын
Hi Joshua Thanks for the video, what resin you would recommend for printing teeth on envision one printer?
@IPrintForFun3 жыл бұрын
Awesome Video! I swear though my Exocad doesn't seem to let me do the things that yours does! What's your secret?!?
@khaledshabany31823 жыл бұрын
Can you do that with an implant-supported temp and the jaw scans? Do the implant positions move with the jaw scans? Thanks.
@khaledshabany31823 жыл бұрын
I tried that but it either aligns to the maxilla or the mandible but does not move the second arch unless I am missing something there
@khaledshabany31823 жыл бұрын
Can you do that with multiple areas of teeth? I tried but the block out only works for one block of teeth (#18-20) and not #23-26 for example. Of course, I can't connect #18-26 because there teeth in between.
@joshuajakson63013 жыл бұрын
one at a time
@khaledshabany31823 жыл бұрын
@@joshuajakson6301 Thanks. Do you have a demo video? I gave up and designed a full RPD this evening even though it is a temporary.
@joshuajakson63013 жыл бұрын
@@khaledshabany3182 btw there is a new module which does this the partial module in galway does this workflow alot better if your interested in learning contact us at evolvedentistry.com
@khaledshabany31823 жыл бұрын
@@joshuajakson6301 Thanks. I just bought Plovdiv a few months ago. Not sure I want to do that yet :)
@jakeroberts21203 жыл бұрын
Well done, excellent tutorial.
@isaiasabrego3 жыл бұрын
This is so awesome. Ive been trying to do this for months!!!
@joshuajakson63013 жыл бұрын
ANYTIME! SPREAD THE WORD!
@isaiasabrego3 жыл бұрын
@@joshuajakson6301 BTW. i've heard that printed materials are not "relinable", because the soft reline material do not bond to the printed base. Any thoughts on this?
@michaelgagaoudakis2123 жыл бұрын
Will do. Gotta upgrade this weekend.
@joshuajakson63013 жыл бұрын
Hit up tree
@michaelgagaoudakis2123 жыл бұрын
Love it! Nice flow.
@joshuajakson63013 жыл бұрын
Bro do some designs this way!
@Robdotfer073 жыл бұрын
Thanks for the video. What cement gap parameters do you use when you treat the teeth as a pontic for wax up bottom? Do you allow a stop so the teeth remain where they were designed?
@thebruvas80513 жыл бұрын
Cool trick thanks
@adrianaungson45343 жыл бұрын
HI, i am not able to do the final step. the attachment substraction goes yellow.. any advice?
@joshuajakson63013 жыл бұрын
there is an issue with your Boolean the full mesh you are doing the Boolean subtract again has an issue
@isaiasabrego3 жыл бұрын
Nice!
@breannamcmillen21623 жыл бұрын
Do you do training and if so, how can I get into contact with you to set that up?
@raularturocantuordonez65513 жыл бұрын
Wow👍👍👍👍
@mhb30033 жыл бұрын
Oh man the video doesnt have a voice
@makhluktuhan97464 жыл бұрын
Tq for the video. If i want to design the teeth and base together but later split it, so that i can print the teeth and base using using a different resin, is this possible? How do i go about doing it?
@ivanliwu66894 жыл бұрын
do you had facebook can i ask you personaly about bite rim miss orientation on full denture modul.. thank you before
@maciejspicker15694 жыл бұрын
super
@maciejspicker15694 жыл бұрын
????
@BB-lh4su4 жыл бұрын
How i should create the order for one arch denture design Thank s
@rubengil63774 жыл бұрын
I mean is cool don't get me wrong, but is sad that Meshmixer a free software can handle this way better.
@joshuajakson63014 жыл бұрын
I agree why they are coming out with a one click auto extraction tool it works amazing i can send you a video showing you the feature but can publicly share it yet
@rubengil63774 жыл бұрын
@@joshuajakson6301 sure thing would love to see that actually
@puddygood20024 жыл бұрын
Hey Josh, is this the Exocad Matera edition? I needed you to walk me through this one.
@joshuajakson63014 жыл бұрын
Hey Jeff this is actually the pre-beta version I will be showing this weekend looks like you have a Headstart
@puddygood20024 жыл бұрын
Joshua Jakson At IDT? Which day?
@joshuajakson63014 жыл бұрын
Saturday I believe
@Rollie304 жыл бұрын
making a Full denture against natural dentition possible with exocad?
@joshbrooks91435 жыл бұрын
Thank you, I learn something new from you every time.
@joshbrooks91435 жыл бұрын
Thank you Joshua
@joshbrooks91435 жыл бұрын
How does the alligator clip affect the impression?
@joshuajakson63015 жыл бұрын
you just need to get rid of it is all in edit meshes