Steven's Hobby Woodshop

Пікірлер

@shatbratches 6 күн бұрын

The speedsquare/ruler trick to mark the curves of the trunk is insanity helpful, not just in this paritcular case but in other projects where I have always had a hard time translating the contours of some fixed space onto a piece of wood. Thank you!

@deserttrailscout 15 күн бұрын

This was awesome! Exactly what I was looking to do for my Jeep Compass Trailhawk for all my recovery gear! Thank you!

@gjoy2011 Ай бұрын

Great video full of very insightful procedures explained clearly. Thank you for putting this together. I tried using the dimensions with a vise I bought from Grizzly. The vise looks identical to the one used in the video. However it seems like some dimensions are slightly off.

@deadeyessmiling 2 ай бұрын

This is a phenomenal build! Have you had any issues with the liner getting snagged along the hinge seams?

@stevenshobbywoodshop4628 2 ай бұрын

Thanks, the liner doesn't get snagged along the hinge seam, but I left a gap there (about 4-5mm) so it can freely rotate/move. Cheers

@piotrkaminski1 2 ай бұрын

Very nice and helpful video. Thank you.

@RANDYSWORKSHOP 3 ай бұрын

I must give you a thump up for your detailed and accurate demonstration on how this vice is installed, excellent job...

@stevenshobbywoodshop4628 3 ай бұрын

Thanks for the kind words 🙏 cheers

@RANDYSWORKSHOP 2 ай бұрын

@@stevenshobbywoodshop4628 My order of similar bench vice just arrived today. Can I ask a question： how did you calculate the distance from the base plate to the spacer -block so that the base plate connecting to the spacer block exactly?

@RANDYSWORKSHOP 2 ай бұрын

Sorry I got your detailed digram of your plan. Thanks

@stevenshobbywoodshop4628 2 ай бұрын

Ok goodluck with the installation 👍

@RANDYSWORKSHOP 2 ай бұрын

@@stevenshobbywoodshop4628 Does it work to use your exact diagram measurements for installing my new vise on my workbench?

@powertrihy4874 3 ай бұрын

Fantastic great idea, I've a large tool selection as a chippy but only a small car at the moment this is a great idea thank you well done!

@neilphillips9163 3 ай бұрын

That’s a great implementation of that design. The mount looks really nice. Good work!

@user-kb1kn5gv3w 4 ай бұрын

The tools in the drawers must be secured, otherwise they will rattle and dangle

@jeffhansman2829 4 ай бұрын

Excellent presentation and description. The sound effects work nicely too. Thanks for showing us your work!

@samuelgreenfield1754 4 ай бұрын

Amazing

@clutions 4 ай бұрын

Nice install!

@severussmith6326 4 ай бұрын

i wish if i could do that too , nevertheless ,i am gona have it custom made by showing the video to a professional wood worker , thanks buddy .

@stevenshobbywoodshop4628 4 ай бұрын

Thanks for the comment, hope they can help you out with the project 👍 cheers

@Gazman299 5 ай бұрын

After watching many bench face vice installation videos I think that yours was the best. Nice clean work. Well done.

@stevenshobbywoodshop4628 5 ай бұрын

Thanks for the kind words 🙏 Glad you found the video useful, cheers

@vdmaker9662 5 ай бұрын

Nice clean work and excellent video!

@alotlater1905 5 ай бұрын

Thank you!

@Reisof 6 ай бұрын

Çok güzel olmuş tebrikler

@juliancasey501 6 ай бұрын

Hi, nice vid. No quick release on that model eh?

@stevenshobbywoodshop4628 6 ай бұрын

Thanks 🙏 No this model hasn't got that feature unfortunately... Cheers

@rafajezierski5028 7 ай бұрын

Perfect work Thank for inspiration

@austinalexander238 7 ай бұрын

Wow, man. So cool!

@handyjim 8 ай бұрын

brilliant

@handyjim 8 ай бұрын

thats nice i have just bought one this video was very helpful

@stevenshobbywoodshop4628 8 ай бұрын

Thanks, glad it was helpful 👍 cheers

@aKid1001 8 ай бұрын

Off centre question - What wood do you use for your workbench top? It looks like a very good replacement for my MDF top!! Keen to know!

@stevenshobbywoodshop4628 8 ай бұрын

Thanks, the top is made of 2x18mm plywood sheets, it has a hardwood veneer on the outside, sold as 'red hardwood', cheers

@glennirwin4710 9 ай бұрын

Very nice.

@WhataTry 9 ай бұрын

Great job will illustrated and well videotaped, thank you.🇮🇪☘️

@hoppskippity 9 ай бұрын

It amazes me how some people are so very skilled in their trade, and have mastered the video production equally. Fantastic work on all fronts! Inspiring.

@stevenshobbywoodshop4628 9 ай бұрын

Thank you for the kind words, means a lot 🙏, glad you like the video. cheers

@PackAddict 10 ай бұрын

Excellent video and build! As a builder, my favorite line was. "I managed to glue the sheet into position." but it also sounded like, "glue the shit into position." That is what I would have been saying at this point in the build! Again, excellent work, keep it up!

@stevenshobbywoodshop4628 10 ай бұрын

Haha thanks, yes my English sounds like "sheet" too 😆, cheers

@RoadRunnerMeep 10 ай бұрын

Great design I conteplated something like this, because it gives you the entire boot space but also allows you to carry your entire workshop when you're one of those people who likes their tools

@JoeRoganful 11 ай бұрын

Imperial measurements in decimal notation is so cursed.

@stevenshobbywoodshop4628 11 ай бұрын

Yes, but I'm a metric guy so I'm not used to the fracture things 😆

@ewetuber186000 11 ай бұрын

Nicely done

@aishainman Жыл бұрын

I've had the chance to use this table a couple of times now. It's fun to whip out in front of people:) I can see what people are talking about when they say the legs are delicate, but they're design to support a "mostly" vertical load, not be torqued from the side or pushed back into place. If you just let the table open or close on it's own and don't force anything, it works great kzfaq.infoUgkxyFZUPFEey-PuqsPMxqaykBhgA1LWxFHh Once it's set up, it's pretty solid. My only gripe would probably be related to the clamps provided. They're not the highest quality. They do the job, so no big deal, but they could be better. All in all, pretty cool gadget.

@studio-beat-box Жыл бұрын

This is the video I needed. Thanks for sharing. I have the exact same vise that will soon be added to my almost ready workbench.

@stevenshobbywoodshop4628 Жыл бұрын

That's great, glad the video is useful, have fun with the project. Cheers

@sawdust302 Жыл бұрын

Great video. Why did you add a spacer block under the top instead of mounting the vise directly to the top?

@stevenshobbywoodshop4628 Жыл бұрын

Hi, you can mount it directly to the top, but then the 'clamping height' will be less high. For this vise it was recommend to have 65mm (B) between the top and horizontal guides, so I added the spacer to lower the vise. Thanks & Cheers

@philipchandler330 Жыл бұрын

Superior quality of craftmanship

@fokanerantsieng4642 Жыл бұрын

Brilliant idea and thanks for sharing 👌🏽

@imcg Жыл бұрын

Excellent guide mate, ive got the slightly smaller version and will use your excellent tutorial. Liked and subbed

@jessemanmarcharris Жыл бұрын

You've done a great build! So many ideas for my planned project.

@berniesr Жыл бұрын

That's a very handy video for me. Thanks for taking the time to make it.

@-joe90 Жыл бұрын

Excelent¡¡¡¡

@playpadel5926 Жыл бұрын

One word - brilliant!

@talhamiah4319 Жыл бұрын

Where can I get the boot liner

@stevenshobbywoodshop4628 Жыл бұрын

I got it from a site called 'Autodoc' (europe) cheers

@viktorchao4191 Жыл бұрын

amazing work

@antonesterhuizen2573 Жыл бұрын

Love your videos... Just a tip... if you take off the carpet you will add a 0.5 to 0.7 decibells... if you cut a small 45° angle lip in all the corners you will also add on the db's... and if you really want a few more, you can seal it with rezon... Keep on keeping on.. much love brother