Yes, Iwata, HS, Sparmax, GSI work great with this compressor
@danytalloen3 күн бұрын
I just receives mine day before yesterday and thought of testing it on a cockpit... it doesn't release the air :(
@SprayGunner3 күн бұрын
Please reach out to our customer service and they will take care of this for you! [email protected]
@gaetanoesposito6584 күн бұрын
Ciao. Abito in una città con 40 gradi e 50/60% di umidità. Colori Airbrush color (diluiti con acqua distillata) e H&S Ultra 2024 (che come sai ha il tappo chiuso). C'è un sistema per evitare che l'ago si secchi velocemente? Intervenire con un pennellino ogni 20 secondi è veramente snervante.. Puoi consigliarmi qualcosa da inserire nel prossimo carrello? Grazie.
@SprayGunner4 күн бұрын
Yes. Try using 4021 instead of distilled water.
@edgar96515 күн бұрын
Thanks for explaining the history and the different models.
@bigchef211213 күн бұрын
Beautiful
@scottyboy626913 күн бұрын
4012 is so bad, causes so many issues with seeding etc couldn't figure out why for longest time. All hail king 4011 and 4020! Edit: I'm holding back judgement on 4021 so far.. it definitely hasn't eliminated tip dry but my trigger feels a lot more consistent when doing repeated on off(daggers, dots etc)
@SprayGunner12 күн бұрын
4021 is the new king! spraygunner.com/products/4021-createx-reducer
@boot_leg_ramen_noodle14 күн бұрын
The model looks awesome and I am definitely adding this paint to my arsenal 👍 !!!
@ChilliwackimusPrime18 күн бұрын
I always hear a 1:1 as a goto ratio for mixing wicked colors. It sounds to me that with this new 4021 you do not need to do a 1:1? Is that correct? Do you get the same result with 30% 4021 as you would with say a 50% mix of 4011? Thanks guys 😊
@atlmacman20 күн бұрын
Sounds awesome. But what am I going to do with the 64 ozs of 4011 sitting on my shelf? 😂
@marcuseisenhuth19 күн бұрын
Just use it 🤙🏻
@GenuineRage18 күн бұрын
pour some drinks up for the boys!! 😂
@scottyboy626913 күн бұрын
4011 is good, it's the 4012 that's icky
@francivalterlimapereira294322 күн бұрын
sensacional sempre o melhor pro artistas, Createx Colors.
@sveeart22 күн бұрын
Looking forward to trying this out once its available in the UK 👍
@airbrushfactoryoldenburg91722 күн бұрын
Very cool, we use it in Germany too. Very good stuff!
@pat206822 күн бұрын
Glad 4021 has hit the shelf. Createx tech support mentioned to me a couple of weeks ago to expect this soon. I struggle with airbrushing 6013 autoborne silver on model cars. This should help me based on my discussion with Createx. Will order 4021 tomorrow.
@SprayGunner22 күн бұрын
it will help! Thank you for your business.
@reelstrikelure22 күн бұрын
Looking forward to trying this new product!!
@GeraldsArt22 күн бұрын
This New Reducer 4021 is Magick✨ I already try it in my Airbrush Classes and Personal Projects and works Awesome!! “No Airbrush Tip Dry” 🤩
@SprayGunner22 күн бұрын
Thanks, Gerald! We're happy to hear that!
@newarthh22 күн бұрын
Sounds great Gerald! Cant wait to test it. How does it work? Special ingredients? Are they toxic? Are there certain safety precautions that must be observed? What nozzle sizes have you tried it with? What happens if more than 30% reducer is added?
@PopsiccDesigns20 күн бұрын
You can read through the safety data sheets on the 4021 at the spraygunner website. I read through them and it looks quite safe but you should always wear a respirator when spraying paints.
@skue35222 күн бұрын
this is wonderful. More please
@Ed-Irvin22 күн бұрын
Would you also recommend this reducer for miniature acrylic paint like Vallejo or Citadel? I currently use Vallejo thinner and flow improver with a Patriot (0.3mm), but that was just what I started with, not for any dedication to the brand
@SprayGunner22 күн бұрын
We didn't test all the brands yet, but yes - this reducer helps other water-based acrylic paints as well.
@GenuineRage22 күн бұрын
just ordered some. i use uvls as a binding agent for dry flaking sometimes, i imagine this would be a good use case for that so i have more time to work with the clear while it's tacky. In terms of metallic paints like wicked gold, I'm guessing this isn't ideal, right? from my experience with lacquer using slower reducers causes the flake to settle before the paint is flashed off, and im assuming it would be similar using a slower reducer for acrylics as well.
@SprayGunner22 күн бұрын
thank you for your order! So we've tested it with several different metallics and pearls. It does delaying drying time but not as much to ruin the look of most metallics so for most it definitely makes sense. However, do not use it with ChromaAir CA200 aluminum or CA201 gold, it dulls them.
@GenuineRage22 күн бұрын
@@SprayGunner thanks for the reply! im excited to try it out, dry tip was the biggest downside to using acrylics, but for my situation acrylics are all i can reasonably use right now. cheers!
@robertscott339923 күн бұрын
Pantyhose ,knee highs old go to staple. Used them in my dad's body shop . Just wash them before using them for filters and with airbrushing they will pay for them self fast
@gabriellee592827 күн бұрын
Thank you!! Definitely going to buy a self centering now. I’ve already had to buy 2 airbrush with the thread tip 😭.
@gaetanoesposito65827 күн бұрын
Ciao l'ho appena comprato da voi. Avrei una domanda da farti se puoi rispondermi. Quali colori della Createx sono più adatti alle tecniche di graffiatura e cancellazione? Grazie
@SprayGunner27 күн бұрын
Thank you for your business! Illustration Colors spraygunner.com/collections/createx-illustration-colors-all
@gaetanoesposito65827 күн бұрын
@@SprayGunner Grazie. Purtroppo avevo anche preso gli Airbrush color. Al prossimo acquisto allora.
@furiouswings244429 күн бұрын
Thank you for this video, it was really helpful. xx
@SprayGunner22 күн бұрын
Glad it was helpful!
@kevinpritchard7855Ай бұрын
I want to know also, where did you get those skulls? How did you make that or did you buy that somewhere? Please get back to me I love skulls.😂
@killergameshit4529Ай бұрын
been using mine for about a month now,,, project after project ,,, it is a POWERHOUSE.. I love it,, been blasting glow pigment through mine,, and to anyone who knows,,, it takes a lot of pressure,,, im shooting at 40 psi for hours blasting HUGE micron particles through mine,,, airbrush .8 nozzle NO NAME and compressor NO NAME tooty,.,. LOVE THESE TOOLS
@SprayGunnerАй бұрын
That's great to hear! Thank you for your business!
@JohnnyGearBotАй бұрын
Do you have a video about the Nautilus submarine?.
@ROCKETKNIGHT-ph7xpАй бұрын
where you get the skulls?
@victoralosi1461Ай бұрын
Nice
@MetalTimeWorkshopАй бұрын
Wow 🤩 We have no words. Such a talented and soulful work. Thank you so much STEVE LEAHY and SPRAYGUNNER!
@StevenLeahyArtАй бұрын
You guys are very welcome. It was my honor.
@Dude_SlickАй бұрын
Yo man. I'm a big fan of your company and a repeat customer. But I have to play the devil's advocate here and point out that all airbrushes are cordless. That one also happens to be hoseless.😁
@SprayGunnerАй бұрын
We didn't come up with it, just using what's trending. There are very few searches for "hoseless", besides this term will be wrong too since there is actually a hose included in the set for optional use. No worries, society will survive it. Same as we did "internal mix airbrush". Trust me, there is no such thing as internal mix in any airbrush ;)
@Dude_SlickАй бұрын
@@SprayGunner
@jonathanlevine4661Ай бұрын
what is the working time of the compressor ? Can you change out the battery when it runs out?
@SprayGunnerАй бұрын
2 batteries in a set, both have around 30-35 min continues run on a full charge. Since the compressor has auto-stop function (it's not working when you're not spraying), we're talking 1.5 - 2 hrs of average working time. It takes 1.5 hours to fully charge spare batter with type-c usb cable. Check it out here spraygunner.com/products/cordless-airbrush-battery-powered-compressor-with-airbrush-kit
@ainttakenanyshitАй бұрын
It is a good thing that you test ALL units before shipping which helps "weed out" the baddies.... After your testing is complete, remember to make sure the regulator is FULLY CCW - at the minimum pressure setting, so to NOT have the regulator with any tension on the inner workings of the regulator. It is a known good practice to ALWAYS keep the regulator of ANY air compressor to fully CCW - minimum setting, when not using the unit. This keeps the regulator from developing a "set" which does not help the regulator accuracy and working lifetime....
@user-qq5ls8xz6tАй бұрын
Very good video bro
@SprayGunnerАй бұрын
Thank you so much 😀
@DiecastGraveyard2 ай бұрын
Fantastic equipment. I can’t wait to put this information out to the Diecast community.
@mannygiapitzakis77782 ай бұрын
Hi, I just came across this video and really enjoyed it......very informative. Can you please confirm which colour green you used in the final step of this paint scheme. Was is it fast back green (can't seem to find a listing for this colour) from Wicked or a Pearl Green?
@SprayGunner2 ай бұрын
Pretty sure it was fastback green but can't tell for sure, it's been a while...
@PlamoSpecialist2 ай бұрын
Awesome work Artem!
@SprayGunner2 ай бұрын
Thank you! Cheers!
@GeraldsArt2 ай бұрын
Awesome Set!! 🔥🤩🔥 Great Stuf Like Always
@SprayGunnerАй бұрын
Thanks 🔥
@BiffGibson2 ай бұрын
These are both great companies, thanks for the excellent products and services.
@SprayGunnerАй бұрын
Our pleasure!
@paulmanhart44812 ай бұрын
What is this called? Or the part number?
@SprayGunner2 ай бұрын
Due to consumer feedback we now offer this device without a quick coupling since it can be fit additionally if needed. Here it is spraygunner.com/products/air-filter-moisture-trap-by-no-name?_pos=14&_sid=e714bedd3&_ss=r
@ReidarSkofteby2 ай бұрын
Great information, thank you!
@SprayGunner2 ай бұрын
Glad it was helpful!
@killergameshit45292 ай бұрын
@SprayGunner Com i just bought this air compressor airbrush kit and i am interested in using a .5 setup because i want to spray glow paint and you state in the video "it has enough power to supply any airbrush up to 0.5 millimeters with the standard air cap" What does that mean standard air cap? Im so new at airbrushing i bought your kit to learn and i havent opened it yet, bought it last week.. so im as new as it gets, lol
@SprayGunner2 ай бұрын
Hello! It's okay to use .5mm airbrush with a round air cap, not fan cap since these are use much more air. Even fan cap can be used with this compressor but on lower pressure so paint needs to be reduced accordingly.
@SprayGunner2 ай бұрын
Thank you for your business!
@killergameshit45292 ай бұрын
thank you very much for your response, I will go to your website and find the .5 supplies i need to add to the airbrush that came with the air compressor. im very excited to be a noName customer and excited to learn airbrushing @@SprayGunner
@killergameshit45292 ай бұрын
just bought your .5 gun from the your website much cheaper than amazon. im glad i can buy all the stuff i need in one spot now,, bookmarked your website,, thanks again @@SprayGunner
@SprayGunner2 ай бұрын
we highly appreciate your direct business! Feel free to reach out to our customer service with any questions. [email protected]
@KendallAndrews-ro7rt2 ай бұрын
Will the primer work as an adhesion promoter on the rubber (midsole) of the shoes without cracking and peeling?
@victoralosi14612 ай бұрын
So many atomizers so many
@Dude_Slick2 ай бұрын
She needs to grab the brush. The trigger is the only place she is touching the actual tool. Better to learn with a hose.
@juniorf46012 ай бұрын
Don’t 😮 just send it to me and I’ll clean it.
@jeffreywarrenpark91493 ай бұрын
Basically, you could put nearly anything in front of the airbrush, (ANY MODEL, ANY BRAND), for free, and get a spatter effect. AND, not only is it free, it is completely variable to your liking!!!
@Ritz-og2tq3 ай бұрын
Does this dry flake method also need to be sanding before final clear coat?
@bravizturnbull23583 ай бұрын
I just had a question so i'm use to using iwata and never seen a single piece air cap and I usually spray with the cap off to access the needle easier to wipe away any tip dry, but with how this is set up how does that work?
@SprayGunner3 ай бұрын
Hello! This model was designed for beginners and it’s not recommended to remove protective cap when you just start, that’s why it’s one piece. You can either upgrade the air cap to evolution (it fits) or get Evolution 2024 airbrush instead spraygunner.com/products/airbrush-kits-by-type-gravity-feed-harder-steenbeck-new-evolution-2024-crplus-solo
@magusreaver3 ай бұрын
filtering, and reusing would never have crossed my mind. Thank you. I should add a bottle to my arsenal of paints, and chemicals. Another tool for the future.
@SprayGunner3 ай бұрын
Glad it was helpful!
@vadimkorob26893 ай бұрын
Thank you for the video What is the maximum flake size this dry flake gun can handle ?
@deniseturnbull82543 ай бұрын
I’m new to airbrushing and this is the one I ordered! Can’t wait to start.