CFL

Пікірлер

@JesusMartinezCreates 6 күн бұрын

Great Video BRO!

@lonnease6415 22 күн бұрын

Nicely done! I'll have to check out those last two clamps. I haven't used them before. And as far as coining Kupo as ripping off Cartellini clamps, US patents (and patents in most countries) don't last forever, so since the Cartellini clamp was invented in 1992, its patent likely expired in 2009-ish.

@cfl4286 22 күн бұрын

Hadn’t thought about that! I know there’s several copycats out there. Impact, BHs brand, has their version. Not sure if they’re based in the US. As far as I can see, the kupo version is an improvement on the cardellini design. Time will tell how it holds up long term. Something that I forgot to mention in the video, it also doesn’t seize up or bind near as much, which is a huge plus. Cheers!

@JackpotPictures 23 күн бұрын

Not boring at all! Thanks for taking the time to explain!

@cfl4286 22 күн бұрын

Glad you enjoyed!

@obarovft314 24 күн бұрын

too many light fixtures. How many people have the budget?

@cfl4286 24 күн бұрын

Short films and self funded stuff probably not often. Producers pay for this without blinking an eye for commercials and movies though :)

@Cinegavo Ай бұрын

amazing and free lesson

@cfl4286 Ай бұрын

Thanks you!

@Cinegavo Ай бұрын

1200b ftw

@davidmorefield Ай бұрын

New subscriber! Love this content.

@davidmorefield Ай бұрын

Love the p600 on a rolling stand and the double net.

@lonnease6415 Ай бұрын

Thanks for the great video! I do think the better comparison would be your C boom vs. a steel boom arm. What does your C boom give you that say an Impact 86 inch boom arm doesn't? A menace arm would still be used in place of either if there's a heavy light involved or if the usable extension is much beyond 8 feet, no?

@cfl4286 Ай бұрын

Absolutely! For one, the C Boom goes out longer than an impact arm (Not that I recommend going full extension all the time LOL but it can do it with a lightweight unit). But the biggest benefit for me is that if I don't use the C stand as a boom, then it's still useful to me as a c stand. Whereas a boom arm is mainly only useful for that one thing. So it really comes down to a matter of space savings. I have a van, so converting a stand to a boom is very valuable to me. If I had a large box truck then I'd probably carry a couple baby and junior boom arms just for the simplicity and speed :) hope this helps!

@lonnease6415 Ай бұрын

@@cfl4286 Good points! Thanks for the explanation

@AbyxGaming Ай бұрын

Thanks for the breakdown! Good job!

@cfl4286 Ай бұрын

Thanks for watching!

@shengproductions5412 Ай бұрын

Love all the lighting breakdowns Caleb! Keep em coming :)

@cfl4286 Ай бұрын

Thanks so much :) Got some really interesting videos coming up that I’m excited to put out there!

@RobertJohnPhotography Ай бұрын

At 3:14 do you remember how far away your Nova was and what was the light level?

@cfl4286 Ай бұрын

It was a little over a meter away. I don’t remember the output level, but can tell by looking it was probably about half brightness give or take maybe 10%. Those novas are bright.

@RobertJohnPhotography Ай бұрын

@@cfl4286 Thanks, yes they are. I have 2 p300c's. I also have a Forza 720B and 2 Forza 300B's along with older Forza 500. I was thinking of getting a p600c that is why I was asking. I notice you use it a lot as your key. I just came across your channel the other day and subscribed.

@cfl4286 Ай бұрын

@@RobertJohnPhotography nice kit! IMO the P600c is the best soft panel on the market. It is good as a key with the aputure softbox as long as you can keep it close to the subject. Farther away and it’s best to diffuse it with a 4x4 or something like that. Thanks for the subscription!

@kimsargenius4112 2 ай бұрын

or … 🤦🏻‍♂️ a Menace arm Junior receiver, already has the rings …. sorry to spam your comments - hopefully the Algorithm accepts this offering on your behalf 😅

@kimsargenius4112 2 ай бұрын

But otherwise, if you want to get FANCY then the butt end of the C-stand is junior size so any Junior receiver should work. Maybe get just a Junior receiver and weld a ring to hook into? Or if you have a Baby Junior receiver adapter? Junior receiver goes on c-stand column and you could sling through the baby receiver Or, heck even a lollipop - attach the Junior receiver to the C-stand and then sling through the grip head

@cfl4286 Ай бұрын

Any of those options would work! I tend to go with the legs because they're already on there, but yeah a lollipop would work just fine or a menace arm junior receiver would work great too since it has the ring built in. For me it's the speediness and the simplicity of it, so leaving the legs on is a good option provided you're not working in tight spaces with low ceilings. If so, then it's better to go one of the routes you mentioned. Several years ago, when I was just hooking the ratchet to the base of the C Stand, I had it pop off and swing down. Fortunately, no one was underneath, and it was only a small lite mat on it, so it didn't come crashing down with a ton of force. Mostly just freaked me out and made me realize I wasn't being smart. Since then I've been very particular about having a solid mounting point like on an actual menace, sometimes to the annoyance of the guys I work with, haha.

@kimsargenius4112 2 ай бұрын

I sometimes do this with the legs hanging down go around the leg assembly column between two of the legs with the ratchet strap. Because you’re tying BACK towards the stand base, there’s enough tension that it won’t slip off the legs when they hang down.

@JoelGabrielsen 2 ай бұрын

Love your setup bro! I want a high roof for my next setup. Great stuff!

@cfl4286 2 ай бұрын

Thanks brother! High roofs are the bomb. I love being able to stand up haha you’re in Arkansas too, right? I’m up in Bentonville. Love your channel!

@lilsouschef 2 ай бұрын

what are the attachments you used to hook up the lights to speedrail? mega coupler?

@cfl4286 2 ай бұрын

Pipe clamps with junior receivers. You can get them at modern studio or matthews SE

@warcat3d 2 ай бұрын

Really like this vlog for grip related stuff! I’ve started started getting more into production videography and videos like this are SUPPERR helpful even just for learning terminology!

@cfl4286 2 ай бұрын

Always more to learn! Stay tunes and I’ll be coming out with more video vlogs and instruction videos. Menace arms, wall spreaders, large frames, tenting windows, condor rigging. all that kind of stuff I’m planning to get to eventually! Hopefully it’ll be helpful to everyone.

@PDMokry 2 ай бұрын

Great vlog! Nice to see another G&E vlogger here on YT! Keep it coming!

@PDMokry 2 ай бұрын

Just subbed!

@cfl4286 2 ай бұрын

Thank you sir! Love your channel. You’re a huge inspiration!

@richardsudarmadji9421 2 ай бұрын

Great video, how much do you got paid for one job as a gaffer?

@cfl4286 2 ай бұрын

It’s project dependent. Usually between $600 and $800 per day for labor. On a feature film or longer form project the rate goes down to $400 or so. The van and equipment prices are all additional and listed on my website!

@ericdargan 2 ай бұрын

Great video! One question about the c-stand boom arm. Looks like you have an ear going into a lollipop mounting to the base stand, but how are you connecting the c-stand? Thanks in advance. Looking forward to your video on this.

@cfl4286 2 ай бұрын

Thank you! Its a pipe clamp bolted to an ear. This one is from Kupo, but American makes one as well that is welded instead of bolted. Google C Boom clamp and a few options should come up. Video is being edited now.

@ericdargan 2 ай бұрын

@@cfl4286 Brilliant. Thanks so much!

@ericdargan 2 ай бұрын

@@cfl4286 Feel free to just address this in the video if you prefer, but could you support weight with the c-stand fully extended? approx 10ft? Looking at an impact boom and maxes out around 5 feet and is $60. Will either buy that or the c-boom clamp. Thank you again

@cfl4286 2 ай бұрын

@@ericdargan yes, it can go full extension. You would just need to counterweight it properly with a shot bag and ratchet strap, and also make sure not put any light on it that’s heavier than a couple pounds (LIte mat, 60 watt LED, etc.). Any heavier you’ll bend it. Are you talking about an aluminum impact boom? I would steer clear of that. For dedicated boom arms you need steel to safely arm a light out over talent. A Menace arm is the only exception, but is made with Schedule 40 speedrail w/ a menace arm hardware, and is supported by ratchet straps to keep it from bending. Also, for any boom you need a combo stand for the base. Definitely not something you want to do off of a C Stand or Baby Stand. Hope this helps!

@KAREKINFPV 4 жыл бұрын

Canon and Sony can suck it. 😂😂 booo...

@KAREKINFPV 4 жыл бұрын

Nobody is talking about how highlight and shadows are pretty much baked in. Except for using non raw adjustment methods.

@KAREKINFPV 4 жыл бұрын

Yay!! Then you can get anamorphic with 180mm range. 😂😂 I’m gonna look into what your saying for sure.

@cfl4286 4 жыл бұрын

180? Nah man it works great with the 50mm I have on it right now, which I guess is close to a 30-35mm with the 2x stretch.

@KAREKINFPV 4 жыл бұрын

Caleb Hoenshell I’m just giving you a hard time. 😂 so what’s the final focal length?

@cfl4286 4 жыл бұрын

@@KAREKINFPV probably somewhere close to 35-40! My 58 mm Helios is somewhere near a 40mm full frame equivalent. I'll probably make a video in the next week or two about it. I'm looking at getting a 35mm takumar as a taking lens for a wider option as wider lenses look the nicest to me :)

@leebrandt33 4 жыл бұрын

Hey man, sent you an email

@lily6097 5 жыл бұрын

why is this so good?!?

@florineli.barbasura9238 6 жыл бұрын

i LOVE the song!!! i can.t stop singing LOVE. IT

@fandomfreak3657 6 жыл бұрын

This is amazing!

@sanjida. 7 жыл бұрын

I've been looking for this song for ages!!!!

@ItsEmilyRose 7 жыл бұрын

I FORGOT ABOUT THIS SONG OMG 😭😭

@anthonyrogalski19 7 жыл бұрын

Who else came here because Beyoncé is pregnant

@lily6097 5 жыл бұрын

wait beyoncé's preggo? XD im so late

@janeylayton8336 7 жыл бұрын

Very well done! I love it!!!

@zestymoonbeam4700 7 жыл бұрын

This is a really great lyric video; the timing is perfect and I like the background. May I ask what software you used to make it? It looks like Adobe After Effects since I noticed the text wobbles a little bit (just like in the lyric video for "Closer" by The Chainsmokers) and I find that really interesting. :)

@russelletayson3868 7 жыл бұрын

Wait, wait. This isn't the official lyric video? Awesome!! :) You deserve more likes brother.

@mauriciopena3715 7 жыл бұрын

estro bilis troncic

@heyimhad2275 7 жыл бұрын

AUDREY ❤️❤️❤️ came here for her tbh

@zestymoonbeam4700 7 жыл бұрын

I know I'm kinda late, but this is a really awesome lyric vid. I make lyric videos too, but nothing this sophisticated :)

@JohnCichy 7 жыл бұрын

✟✟✟ Not trying to "troll" the comments section; trying to *Bless* it. _Check us out_ and listen for yourself. Truth in Love *LIKE YOU'VE NEVER HEARD BEFORE*! You'll want to be a part of this! _Subscribe and Share_ ✟✟✟

@cfl4286 7 жыл бұрын

love your channel! This is actually my second channel. My other one that does sermon jams and spoken words is here kzfaq.info/love/ddMfkv1RmIYfyWe72rtKkQvideos Love your work! We should collab sometime!!

@JohnCichy 7 жыл бұрын

Bro! You're pretty dope, man. Praise God! I just checked out a few of your videos. I seen you know how to do typography also. That's something we are just not gifted at. A collab would be sick, my dude

@cfl4286 7 жыл бұрын

Thanks man! That'd be awesome. What would you want to do? Like a sermon jam kinetic type or like a poetry vid?

@JohnCichy 7 жыл бұрын

Did my last message get sent? Everything okay? That was probably too much to ask, huh? hahahah. It's all good, man. All love. Blessings!

@cfl4286 7 жыл бұрын

Thought I replied! I didn't see a response. But I said "Thanks man! That'd be awesome. What would you want to do? Like a sermon jam kinetic type or like a poetry vid?" I didn't see any response but my account could've glitched or something.