So mine is locked and I can’t open it, right from the factory, after they left my riser and conveyer out of my order. Very negative experience with this so far
@cryperi69189 күн бұрын
Thank you! Can't wait to try it!
@mattmorris421711 күн бұрын
Nothing happens without focus. Don't try to do everything at once. Take it one step at a time. Dave Ramsey
@GetOffTheCouchDesign10 күн бұрын
Just what I did! One step at a time!
@henrytobler15 күн бұрын
I’ve faced inconsistent cutting depth, and it often requires recalibration, which is a hassle during busy production runs. Additionally, I've struggled to get customer service to respond promptly when I have questions or need support. Can you help me?
@GetOffTheCouchDesign14 күн бұрын
How’s the alignment with your mirrors? Is everything in perfect alignment? Sometimes the slightest difference can cause this. Or if you’re cutting plywood the glue can cause it to not cut all the way in parts
@9_nein_922 күн бұрын
Where is this factory? Mine were made in Vietnam
@GetOffTheCouchDesign21 күн бұрын
Oregon
@JL-vd6yn24 күн бұрын
How to prep wood before whitewashing? How and what to do seal wood after whitewashing?
@lsksniper193629 күн бұрын
A key doesn’t run out of batteries and costs significantly less than that shitty lock.
@GetOffTheCouchDesign29 күн бұрын
Kids lose everything
@lsksniper193629 күн бұрын
@@GetOffTheCouchDesign stick it into the iPad the same effect as glueing it to their forehead 😂
@GetOffTheCouchDesign28 күн бұрын
You’re on to something here 😂😂
@OfficerErik1K-8829 күн бұрын
Or (for a cheaper option) give your kids a key to the house.
@GetOffTheCouchDesign29 күн бұрын
Solid idea if I want it to get lost!
@Alien_ZorpАй бұрын
The Music is like Something i would hear in ancient Egypt
@GetOffTheCouchDesignАй бұрын
Cool!
@dolphin19721000Ай бұрын
Great Family Team Work!🎉
@GetOffTheCouchDesignАй бұрын
Always nice when everyone chips in!
@CarboardiaАй бұрын
But what is it for?
@GetOffTheCouchDesignАй бұрын
Halloween decor
@AidanDoegeАй бұрын
Why is bro using 2 sheets of sandpaper.
@GetOffTheCouchDesignАй бұрын
Watch the whole video fam
@aminthapa610Ай бұрын
How can we attach handles on the side ?
@GetOffTheCouchDesignАй бұрын
You would need different handles or it would be a process
@rumrun112 ай бұрын
Wow, that’s so little information!! Kinda lame.
@GetOffTheCouchDesignАй бұрын
It says right in the title. Full length on the channel, check it out!
@gandikha2 ай бұрын
Hi friend thank you for this video, what controller are you using with? Ruida? I don’t have that brand but mine comes with plug u disk I don’t if it’s compatible to camera
@GetOffTheCouchDesignАй бұрын
Thunder uses their own proprietary Rudia DSP. It should work for you but you might need to play with some settings in lightburn
@mirmushtaqali93883 ай бұрын
What is the Green colour tool and what tool is the one which are marking the hole ?
@GetOffTheCouchDesignАй бұрын
That is PicaMarker. Wonder pencil with shape her in the sheath
@SaveTheEcosystem3 ай бұрын
They look great.
@GetOffTheCouchDesign3 ай бұрын
Thank you!
@FromTheHood2TheWoods4 ай бұрын
Clearing my lot in the smoky mountain area, making it a double RV lot. Had a huge black walnut tree and huge walnut tree. I cut them down with the chainsaw and then try to reach out to multiple people in the area who supposedly buy trees, lumber, mills, etc., no one returned my calls, but this one guy who sells Live Edge tabletops and stuff came by with his bobcat hauled off the two very large trees and all I wanted was a coffee table, black white walnut coffee table and he gave me one and a serving tray and let me use his bobcat to haul off my brush into the dumpster
@GetOffTheCouchDesign4 ай бұрын
Very cool’ love some black walnut tables!
@TotalBoat4 ай бұрын
😍😍🙌🙌
@GetOffTheCouchDesign4 ай бұрын
Yesss
@jefftaylor06204 ай бұрын
There’s a big difference between working smarter, and working more expensively.
@GetOffTheCouchDesign4 ай бұрын
If you’re batching out work is smarter to spend on a tool to help you do it more efficiently. IMO. If I sand one by hand it takes 45 min or so to flatten fully then the rest of the grit sanding. This way I can flatten 6-8 in 30 min.
@proudcanadianeh46634 ай бұрын
how does it look underneath? Can you see the screws?
@GetOffTheCouchDesign4 ай бұрын
They are exposed but recessed into the bottom, they could be covered with epoxy, a wood plug or left open to be able to remove the handles if needed.
@zpbeats39384 ай бұрын
Thoughts?
@GetOffTheCouchDesign4 ай бұрын
Super comfy, fit true to keen utility size, solid for work and just doing whatever
@ChaiTea165424 ай бұрын
Thats a very small screews
@GetOffTheCouchDesign4 ай бұрын
Just the size it needed
@poulbakeev53355 ай бұрын
It's great that it's served upside down; usually you have to turn it over.
@GetOffTheCouchDesign5 ай бұрын
Brand new can, worked great!
@skallinator5 ай бұрын
Very cool. Can this be done with a generic light burn camera? Any reason it is $400? Seems like all they added was a 3D printed mount? Thanks!
@GetOffTheCouchDesign5 ай бұрын
This is the only one I have hooked up personally but I would imagine it’s quite the same if it’s a light burn camera. That’s what it gets recognized as
@skallinator5 ай бұрын
@@GetOffTheCouchDesign awesome thanks!
@kilrif85805 ай бұрын
Нельзя так плотно поджимать дерево к дереву. Оно разбухает от дождя. И всё вспучится и искривится со временем. Должен быть хотя бы микро зазор .
@GetOffTheCouchDesign5 ай бұрын
Appreciate the concern. It’s hard to see at the angle but there is an 1/8” gap between all boards
@pockycrafts15 ай бұрын
three days ago… (also first! can u pls pin never been pinned 😔😞)
@marshallborges96065 ай бұрын
Review? Where? When did you review it?
@GetOffTheCouchDesign5 ай бұрын
Where did you think it was going to be a review of the machine?
@TotalBoat5 ай бұрын
Awesome work!! It turned out great
@GetOffTheCouchDesign5 ай бұрын
Thanks! Super happy with it!
@TotalBoat5 ай бұрын
Love this!
@GetOffTheCouchDesign5 ай бұрын
Always fun to mix up some color
@TotalBoat5 ай бұрын
😍😍
@GetOffTheCouchDesign5 ай бұрын
🙌🏼🙌🏼🙌🏼
@TotalBoat5 ай бұрын
Gorgeous!
@GetOffTheCouchDesign5 ай бұрын
Thank you!!
@d.baileyspeaks5 ай бұрын
always stagger. Oversinking
@bradfordrogers5526 ай бұрын
What was that tool that centred the legs?
@TotalBoat6 ай бұрын
So fun!!
@ald.34496 ай бұрын
What laser is that. Looking something that i can put up on a table like that
@jacksonbeelar52796 ай бұрын
The slats are oriented wrong
@GetOffTheCouchDesign6 ай бұрын
What slats?
@MichaelCampbell016 ай бұрын
Nice, but you didn't go to the store to pick up 2 new tools, and then back 3 times for the right fasteners that you failed to get, or got the wrong size.
@GetOffTheCouchDesign6 ай бұрын
All done in 48 minutes for fun with scraps!
@detroyt2323237 ай бұрын
Oof so jaged
@GetOffTheCouchDesign7 ай бұрын
Thanks for the support
@detroyt2323237 ай бұрын
@@GetOffTheCouchDesign not support, constructive feedback.
@detroyt2323237 ай бұрын
@GetOffTheCouchDesign you need to make a jig with a clamp system. That way the circular saw can cut and even straight line on both sides.
@shadowbuilds27594 ай бұрын
Or cap it then who cares
@TotalBoat7 ай бұрын
Beautiful
@GetOffTheCouchDesign7 ай бұрын
Thanks!!
@shake-n-baketimegaming87727 ай бұрын
Looks awesome, buttt looks like yoi forgot a c in critical
@GetOffTheCouchDesign7 ай бұрын
Yessss good catch! I asked people to find the mistake on my Instagram page and no one noticed it! Cheers! I ended up drum sanding it and re doing it
@TheLumberJacked8 ай бұрын
Wait…are those people trying to drink from the teats of a hyena? Hell of a logo 😳
@GetOffTheCouchDesign7 ай бұрын
One of my favorite logos
@TheLumberJacked7 ай бұрын
@@GetOffTheCouchDesign 😂😁 Certainly, it takes a second, maybe a third glance before the imagery unfurls in your mind and understanding blooms. Certainly insinuates that whoever bares this shield deserves attention. 😊
@GetOffTheCouchDesign7 ай бұрын
Such an interesting shield and crazy a professional team wears it! 😂
@robasishmaibam51198 ай бұрын
Please send me the angle dimensions of table legs so i I can weld it myself
@GetOffTheCouchDesign7 ай бұрын
You can get them from semi exact!
@soppyFULL8 ай бұрын
Where did you get the handles from?
@GetOffTheCouchDesign7 ай бұрын
Amazon!
@riordan3818 ай бұрын
If i use a 5 feet 1- 1/2 inch thick plywood for the top, wound I need to add a mid support?
@willwork2fish2619 ай бұрын
What size wood is that? Wanting to build one myself
@GetOffTheCouchDesign8 ай бұрын
Started off as 8/4 rough sawn
@leeread32379 ай бұрын
Total stupid video
@ranchodosacuarios19679 ай бұрын
Do you have to wipe after applying?
@GetOffTheCouchDesign8 ай бұрын
Yes I wipe the excess off
@NicholasRachuna9 ай бұрын
All that just to show is how shitty of a cut you made at the end?! 😂