How much torque on them nuts

Got a question. I had to replace front wheel bearings in the Brake Drum on a 94 Trx300 2x4. Should I grease the axle a little upon reinstalling the drum or is it ok just like it is?

What year is that bike

I'm amazed at how many people think 8' x 8' = 8 sqft! That's 64 folks. If you have an 8' wall that's 10' long, you need EIGHTY sqft of coverage.

How to drain the gas tank on your Honda atv electric shift

I have one of these on my Honda Rancher, yes, it’s expensive and it doesn’t do all that much, but I love what it does to the sound. Especially on a single cylinder engine, it definitely smooths out the puttering sound. I wish the manufacturers would give consumers a choice, someone like me, who uses it as a utility vehicle, I would like to have the bike as quiet as possible, others who are mud bogging etc. might want a more aggressive sound, let us have the choice. Thanks for the side by side comparison.

👍

I had a 2001 300 4x4. It was a great four-wheeler. And it had high low range. It would do the work that the 400 would do. Just a tad slower.

I didn’t know that there was a Rhino 450, i only knew the 660 / 700 ...

was curious if these were any good thanks for doing the review.

Thanks!

Recon is better no hussle.

Very informative video but the happy music in in the tutorial should be something much more metal. The rage that filled me when I got to the brake drum was overwhelming. Beating on it with a 5 lb hammer and torching it while soaking it with penetration oil. The spline not giving up and my hands black while mosquitoes are eating me alive. Please let me know if there's a step I missed while trying to take the drum off. It's an 1988 Fourtrax😅

Excellent!

im doing a outdoor patio bbq and grill area. thinking of using this for the face of the bar and counter area. that really looks nice. .

Nice video. Can you please update on what you think of it now? Did you have any heat problems? Loss of HP?

What diffence with filter code 5gh-13440-80 and 5gh-13440-60 Does he settle in both anyway? for kodiak 450 2003

How do you change the break cylinders I can’t find a video for the life of me

2024..still being referenced. You the man!

I had a old belt on mine never heard any squealing i put a brand new belt on and now it squeals alot any tips or reason why its doing that?? Please some one respond

My book says Valve Clearance (when cold) Exhaust: 0.20 ∼ 0.25 mm (0.0079 ∼ 0.0098 in.) Inlet: 0.10 ∼ 0.15 mm (0.0039 ∼ 0.0059 in.) your valves are super tight 😳😳😳😳 well ima try it on mine and lean toward the tight side

Which way does the oio filter cover go back on ? Where the filter dowel rests on the cover there is a slot , does it go down or up?

What year everybody's saying filter is too small

Great video thank you. Can they handle two people on board?.

Nice

Really cool and informative video, looks like these are about 7K dollar in base trim. Hard to decide what to get there are so many choices out there today.

i have a 2017 rancher 420 and it's flashing a dash after a very short ride. will it be rideable after it sits for a bit?

Wish my top pin came out that easily 😂

I feel like this explained NOTHING.

Those things should be mandatory for the peace of everyone else.

Will this work for an 87 too?

Great job 👍

Great video!! Thank you. Short sweet and to the point

Canadian engineering. The Rugged Universal Power Steering system will work correctly for 1 year and then it’s designed to break down progressively. Just watch the front tire uneven wear. My defender will go off the road every 40yds. I took it to the extreme power sports dealership where I bought it to have the alignment realigned 3 times, failing each time. Strike three - then Travis the service manager stated, “there is nothing we can do because the computer sets the alignments”. That’s nonsense and we all know this because you don’t have to be a service manager to realize you just have to install a new steering gear unit trashing the old because Canadian engineering in China by Mexicans sux. Never again. Can Am makes toys for boys, not tools for utility. What a mistake. Buy a tractor if you need to do real work. Make sure it’s not engineered in Canada, assembled in China .

Would this be the cause of oil coming out of over flow from pressure build up?

Thanks for this video. I just broke the gear shift lever this afternoon, because the gator is extremely difficult to shift. The lever I can get locally. I'm wondering what lube I want to use on the clutch, and also on the "linkage" between the lever and the clutch housing. Any suggestions? Thanks again for posting, and thumbs way up.

2000? Mine was closer to 200 bucks. Not nearly as nice and needs some work but I would never and spend that much on one of these. For that price there are much better wheelers out there.

having the HARDEST time getting the oil plug back in the spring and screen are a pain.

Awesome video man ! Straight to the point no bs, saved me from digging for the manual.

Put a cheap electric fan behind the grill so it pulls more air at the motor at mower speed. Idk that's what I might try.

I just tried this. I followed the video instructions exactly, and the dang puller tool actually broke off inside the clutch. Now what? I tried a screw extractor, but no luck. Can the primary clutch be removed without the puller tool?

Which line do I fill it to?

Hello, Are you interested in testing our products? We would like to invite you to test the R2.5" Lift Kit for your 2014 Can-Am Commander 800R

I love Yamaha, only brand I buy.....but that 450 they put in quads and Rhino's is underpowered junk. Repaired a Grizz 450 n thought it would have some power since the 660 is an animal and told the customer to get rid of it. Gutless, slow, an Embarrassment to Yamaha.

I know this is a good cleaner, but in my recent carb budget rebuilding I discovered vinegar is the best and cheapest thing to use. I set a carb that looked worse than this one (hard to judge because we didn’t do a side by side, but it’s the worst carb I’ve seen in my short life). After an hour soak in vinegar and a good scrub and rinse, thing looks brand new. Super easy to find, and definitely cheaper. As a younger guy, I love seeing all the old school tricks that seem to be forgotten in this world of ever evolving technology.

I was at TDC and I couldn't feel any play in the value arms. Do I need to open them it to 0.006 in. ???

Fyi ...if its super cold there is a primer button on the carb ...saved me n -11

Love the whine you hear when you decelerate it sounds so cool. Especially when you downshift

I’ve actually managed to get my grandma’s ‘07 Rancher ES up to 55mph one time on what I’m pretty sure is a fairly flat surface, but i was doing it for fun, I’ll have to do it properly by going both ways & such.

I have a 2005 Arctic Cat 650 V2 (Kawasaki engine). My KEBC Aculator is making weird noises, and my drive belts keep shredding. My mechanic says that the Aculator motor is going out and that I need to replace it. Is it possible that a simple cleaning would solve the issue, or should I order a new one? How can you tell if it's actually going out or not?