Lack of dielectric grease does not cause arching. Dry rotted spark plugs wires do.
@guapmc62734 күн бұрын
Hi I have a 2002 ford escape and I my setup looks like this but I cant get that subwoofer out of the housing so I can replace it.. any advice?
@Precision.automotive3 күн бұрын
Yes it's held in with a factory glue like compound. You can use a heat gun apply a low amount of heat around the edges and then use a knife or razor blade to go around the edges and then you should be able to pop it out of the housing enclosure
@MariaMurillo-wi9do4 күн бұрын
That really thumbs
@aj2vic14 күн бұрын
In my 2004 Chevy Avalanche, i have 2 electrical connectors .Why is that and will it matter which one is connected??
@Precision.automotive3 күн бұрын
Yes, one is high side. the other is the low side pressure switch
@aj2vic13 күн бұрын
@Precision.automotive do I switch them out because the black one is not connected to anything
@johnspencer26117 күн бұрын
Mine is a lt1 93 can't find fuel pump relay it's not by mastercylinder
@Oshane00711 күн бұрын
Bro put the year of your car I doubt the relay is in the same place for every Honda accord smh
@iwin183311 күн бұрын
Some of them have just a spring that gets weak over time . Replace it
@mkenny8016 күн бұрын
No filter i saw a valve body no filter its imside the trans miss
@alexandriamoore173220 күн бұрын
Wonderful video very clear and just what I was looking for thanks❤😊
@RussellGreenstein21 күн бұрын
What are the torque specs for the bolts?
@dillydilly476922 күн бұрын
That channel is your running board, your stupid
@hallwest965022 күн бұрын
😂
@MmNn-mp3lh23 күн бұрын
American pure language but I try to understand thank you so much
@scottschmittmusic23 күн бұрын
So I don't have to turn anything off? No Freon will come out?
@alexmacias123423 күн бұрын
Nope
@bobbiejohnson554927 күн бұрын
We'd actually like it better to just disassemble and reassemble.
@okidokidiego5783Ай бұрын
You have to take off the whole metal plate,there is a bolt and come off with the bird and is easier to do this way. Thank
@ColtonCulwellАй бұрын
I did
@DanielLafontantАй бұрын
How did you fix it I'm having the same problem
@ZkReAr-fs5doАй бұрын
So, I bypassed the relay just to check if the clutch works and it did engage, but there's no cold air coming out... I think the system might be low on refrigerant, or maybe that switch is preventing the freon from flowing?
@alexmacias123426 күн бұрын
Check your blend door actuator15-72507 it might be stuck. Also check your ambient air temperature sensor15-50353. Those two come in to play from what Ive researched, im on the same boat.
@joelbosworth2946Ай бұрын
Haha funny how I'm dealing with the same screw on a Chevy also 😂
@Precision.automotiveАй бұрын
Yeah they suck
@okidokidiego5783Ай бұрын
Where can I buy the metal plate where the board is setting?
@okidokidiego5783Ай бұрын
Where can I buy the metal plate where seat the board? My is toasty and not good for hold the board?
@Precision.automotiveАй бұрын
Try rockauto
@okidokidiego5783Ай бұрын
Thanks@@Precision.automotive
@guitarfool3881Ай бұрын
Did you get your China made Trump Bible ??? Tuck Frump !!!
@loveloveandhatehateАй бұрын
$8 bucks 😂😂😂😂 was 10x that!
@ricardosom7766Ай бұрын
Let me ask you, what is the short lien that goes from the drier to the condenser called? My car has it broken but don’t know how to order it.
@IfixmyownstuffАй бұрын
Didn’t work for me. Bypassed using a u-shaped bent piece of copper wire. Same as you. But it wouldnt start. Returned to stock, cranked right up. No luck.
@Precision.automotiveАй бұрын
If you'd like, we can walk you through the process and help you with yours
@Lala-ux1kgАй бұрын
Do you have to depressor the system to change the low pressure switch
@alexmarie9328Ай бұрын
Nope, just did mine on a 2020 Chevy, it has a check valve to keep it from happening. I did get a short mist but it didn’t unload the system.
@thismann8724Ай бұрын
you just use yor hands and remove it?
@charlespillmanАй бұрын
Just saved me lots of $$$
@skipm8029Ай бұрын
Not useful because you didn't do anything-
@indoor420Ай бұрын
Can i run my alternator wire right to my battery ??
@errolpoxleitner790114 күн бұрын
If you put one way diode in it yes.
@mauricewilliams9689Ай бұрын
What year is the car?
@Joseph796252 ай бұрын
Thank you Paps for this great video mechanic got me 1st time, not paying them. Am fixing it myself .
@RICHTHEFREAK2 ай бұрын
Love it, thanks for all these videos
@jasonjones71612 ай бұрын
Is it adjustable?
@TJKibbe2 ай бұрын
Be better if you showed wires dressed up showing the exact path they go to....
@garthdrake32202 ай бұрын
How did you reattach the new cable at the top?
@gregorymcdaniel22492 ай бұрын
Don’t do this, I did & now I have a lot of scaly rust on bottom of my 3 year old craftsman T240 mower deck , I live in nc with red clay soil. I liked this option until I saw how much rust it caused. Pressure washing is better. I love this mower and I used to buy nothing but John Deere mowers from dealer ships not big box stores. I use it to mow grass only.cheap and easy to repair
@Dogg15122 ай бұрын
Does the 2016 Ford Edge SE, has this setup
@Precision.automotive2 ай бұрын
It might depending on the vehicle specs when it was ordered from Ford. You can call Ford with the vin, and they can tell you switch stereo package the vehicle has
@ezellsimpson70472 ай бұрын
So you change it and it stops working what will it be then 2007 GMC Yukon
@Precision.automotive2 ай бұрын
Check the high pressure switch or the low pressure switch, make sure your ac clutch is engaging, and your ac compressor fuse is good
@Lucas-pv2wn2 ай бұрын
Wow…
@aaronm.19982 ай бұрын
Lol. You just going to pretend the Tranny filter is accessible after only removing the pan? Good grief.
@saulmanzo92122 ай бұрын
Part 2 !
@rwk6732 ай бұрын
The ground wire above the spare tire mount broke, that caused my taillight problem.
@Mike-su8si2 ай бұрын
Im gonna have to show yall a easier way without all that wire you don't need no wire my way you unplug the seat safety sometimes on different mowers you have to cut and twist both the black wires and the white wires together then on down the mower unplug any other safety button and behind the engine theres a main wire plug in unplug that cut the 2 white wires splice those 2 together I can make a short video for yall to see some time if your interested in seeing how i done all mine mine been done so I'd just be showing not me doing it
@Mike-su8si2 ай бұрын
It won't start up on just a battery charger doesn't put out enough power without a battery hooked up even a dead battery with the charger hooked on then it'll start up. You could have touched the red right onto the starter post but it still ain't gonna start up not without a battery Zip tie the extra wire up no need to cut it shorter you may need it long one day you know or even fold an tape it up use wire to bundle it up
@TrailsTracks2 ай бұрын
Whys their 4 wires to the sub? I wana tap in for a signal to a mono block amp and new sub, but theurs 4?