umpty

Пікірлер

@PostalRedneck 16 күн бұрын

Lots of cool looking rigs.

@PostalRedneck 21 күн бұрын

Will this work for my GMT800? Asking for a friend. :). Nice to see another video!

@lancelamphere7899 18 күн бұрын

Postal you can attempt this overland hack on any vehicle that has the space for a solar panel

@kaykim20 29 күн бұрын

Thank you for this video! I want to add solar for my EQS 450+

@umpty 29 күн бұрын

You should!

@RandomDude989 Ай бұрын

And it has a charge controller which is important.... I was starting to have a heart attack when I didn't see a charge controller. I've seen some electric pontoon boats burn down due to over charging. I was going to do something like this to the brown GMC Suburban... but its dead and in the junk yard. (The reason why I wasn't at any events last summer.)

@umpty Ай бұрын

Yes, and a good observation. A charge controller is another item that is critical in the solar daisy chain. I have several and was too lazy to grab one.

@PostalRedneck 4 ай бұрын

What a trip. One heck of a long night digging your car out with little to no sleep after we found a spot to sleep due to all the canon fire.

@bigtsmotorizedbikes4242 9 ай бұрын

Did you remove your inner fender?

@bigtsmotorizedbikes4242 9 ай бұрын

And did this give you a check engine code for EGr function?

@bigtsmotorizedbikes4242 10 ай бұрын

After all this time, what happened? Has the repair held up? Caused any problems?

@lancelamphere7899 10 ай бұрын

Yes the repair is still holding, I drive it off-road so it sees some extreme use.

@firstpersonjay5655 Жыл бұрын

Metric Fitting Male M14 M14X1.5 to 1/4 male NPT Pipe Adapter is this the adapter I need for my mercury grand marquis ? Can someone help me thanks

@lancelamphere7899 Жыл бұрын

That is what I used, had to cut threads into the header and the adapter to work. The adapter was a dorman part

@firstpersonjay5655 Жыл бұрын

@@lancelamphere7899 I found a few on eBay and Amazon I can’t find it in the hardware places near me or Home Depot they are clueless to what I’m looking for

@firstpersonjay5655 Жыл бұрын

@@lancelamphere7899 do you have a part number for the doorman fitting ?

@lancelamphere7899 Жыл бұрын

@@firstpersonjay5655 my car is a 2004 it used a Dorman 917416

@firstpersonjay5655 Жыл бұрын

@@lancelamphere7899 what did you use to cut the new splines on the egr adapter ?

@RandomDude989 Жыл бұрын

Was good gambling with ya again. Too bad West Michigan seams to be canceled now. (Jim in the suburban here.)

@umpty Жыл бұрын

Yep, till next time random dude

@PostalRedneck Жыл бұрын

I do want to take a moment and point out that you should never run a 12v compressor strait off a battery or a car that is not running. A 12v compressor needs a supply voltage of 13.8 volts for 12-volt model or it could damage it.

@PostalRedneck Жыл бұрын

This video was so bad that im going to go out of my way to create multiple youtube accounts just so I can hit the dislike button more than once.

@umpty Жыл бұрын

Im just trying to make the world a better place. 5% of people are never happy. I make videos for the other 95% Thank you for your comment, I learn from negative attitudes I get from youtube100% of the time.

@PostalRedneck Жыл бұрын

Im never satisfied! If you would like I can give you some advice instead of just ratting on your video. Let me know.

@PostalRedneck 2 жыл бұрын

Well that was something haha. Longest 2 minutes ever. As a professional auto mechanic I can say I dont use Husky tools only Pittsburgh.

@fillaneednow5074 2 жыл бұрын

The microphone picked up the sound of the falling 1/2" wrench perfectly!

@cartierchronicles2000 2 жыл бұрын

Great video 😊

@Banditt42 2 жыл бұрын

This just happened to me on my 2001 GMC Jimmy and I am trying to find a solution. Thanks for the video.

@umpty 2 жыл бұрын

Yes, I did exactly that, a 1/4 sized threaded pipe from Home Depot, about 2" long. Tapped the new EGR connector/adaptor, used thread lock.

@PostalRedneck 2 жыл бұрын

Did you tap the egr adapter nut on the inside to fit a 1/4" NPT threaded pipe? Interesting way of fixing it and it looks like it should hold for awhile.

@umpty 2 жыл бұрын

The Pipe was 1/4 NPT and the Tap was M14 x 1.5

@danielsmit11 2 жыл бұрын

@@umpty did you find out what was causing the smoke?

@lancelamphere7899 Жыл бұрын

@@danielsmit11 I used a lot of PB Blaster on the exhaust manifold, it smoked for a while

@PostalRedneck 2 жыл бұрын

LOL that look harsh.

@danieldoane5509 2 жыл бұрын

It was a lot harsher than it looked. lol. Id do it again

@PostalRedneck 2 жыл бұрын

He was getting it haha.

@PostalRedneck 2 жыл бұрын

Nice angle. That was a tough hill.

@tylers8367 3 жыл бұрын

Pin it to win it

@RandomDude989 3 жыл бұрын

Nice video!

@PostalRedneck 3 жыл бұрын

Nice Video. We seen some tough trails. I didnt think anyone got any footage of me trying to get around that tree. Man that was close to body damage. Cant wait for next event!

@PostalRedneck 3 жыл бұрын

Great video Umpty. As for PostalRedneck... my decision my be a bit bios but I think he is the greatest youtuber of all time and the end of the video was soooo funny I was winded after laughing for so long.

@nicklovell6297 4 жыл бұрын

Looked like fun wish I could of made it out but ill see ya at the gobbler i am sure

@PostalRedneck 4 жыл бұрын

"Im on a ship"! What a great video! Is it bad that I laughed every time I herd a tree rubbing against your car? That trail left its mark on all our cars that day.

@PostalRedneck 4 жыл бұрын

Heck yeah you got a lot of good parts cheap. Do they add anything to the price for using ropes and straps?

@umpty 4 жыл бұрын

The idea is to use what the yard gives you, we found a contractor van with Ethernet cable and wire. Used that to tie parts together. Many people use seatbelts as straps. All part of the 60 for 60 show.

@PostalRedneck 4 жыл бұрын

looked like a good time up until it started to rain. Glad you are enjoying the Gambler life.

@umpty 4 жыл бұрын

When the windows fogged up and I couldn't see where I was going, I was thinking this is no fun! Now that its been a week: getting lost, getting towed out of a mud hole, and driving in a thunder storm were the only things I remember. Also, fixing the Jeep with a pine tree. (It was dead before we cut it to size blw)

@6thGearGarage 4 жыл бұрын

That's a genius fix on that Cherokee 🍻

@johnlight460 5 жыл бұрын

looking to do the same for my Lincoln town car where did u get the lift kit?

@umpty 5 жыл бұрын

Not a real lift kit on the Abe Lincoln, the jack stands will eventually have to be removed.

@johnlight460 5 жыл бұрын

@@umpty know of any lift kits I could buy?

@umpty 5 жыл бұрын

@@johnlight460 lots of ways you can do it, depends on year of your car also. If your looking for something pre-engineered look at LiftaBrand. or Universal car lift brand donk kits. Note with the Lincoln Town car you will have to install a coil spring kit with longer shocks to replace rear air suspension.

@PostalRedneck 5 жыл бұрын

You guys truly do have a lot of money wrapped up in this car. I cant blame you as its your first time to the event and you will be riding in style as well as have a car that will last forever but the true sprite of the gambler is to be gambling. Either way you are going to have a great time at the event and are already enjoying one of my favorite times... hanging out with friends building cars.

@umpty 5 жыл бұрын

We are learning a lot about what not to do, however; the u-pull had something that I just had to have. Stay tuned because it's getting real $$$.

@usautosterlingheights1586 5 жыл бұрын

Stop on in an say Hi next time - Kevin. (See you at the Gambler)

@umpty 5 жыл бұрын

The Go Rhino push bar and mounting brackets are from a Ford Crown Victoria Police Interceptor. The steel bumper is original to the Town Car.

@mlipscomb3232 5 жыл бұрын

What was that bumper and push bar off of / from?

@PostalRedneck 5 жыл бұрын

18:00 LoL "The internet is wrong... Lets pretend we're smart." That defiantly took longer than it should have haha. Welcome to Gambling.

@Kimbyl 5 жыл бұрын

Do you have to pay them for what you take?

@umpty 5 жыл бұрын

They have a price list so you have a good idea what your cost will be.

@umpty 5 жыл бұрын

Thanks so much, I will look into the Gobbler. I will be checking out your build videos now!

@PostalRedneck 5 жыл бұрын

Looks like a great car to Gamble in. Good luck with the build and I look forwards to the updates. Kinda short notice buy you may want to look up The Detroit Gobbler 500. I will be attending that as well as the Detroit Gambler 500 next year. Good luck and ABG!

Ең жақсы KZfaq

Пікірлер