This would help, but it won't work for Whirlpool.

only uv clear coat paint works

Hopefully someone can help me I have one of these speakers and it shows to be paired to something but it's not my phone and I can't find a factory reset on it I did read word said hold the power button twice and it would disconnect but that's not working help if you can

I personally would've liked to hear actual instruments and raw vocals, then I'd get a better idea of how it replicates sound, like acoustic guitar, piano, real drums and stripped down vocals

But how do you know that it's repaired to your phone

I do the 3m buffing pad wiith flitz or mothers, and any type of wax sealer, it last for about a year or more, then I do them again, only takes like 3 or 4 minutes per light, then done, no sanding and all those sanding steps.

Lot of work, but on video they look good, great job man ! :)

My clamp wasn’t clamped together when I received it wallaby’s do I do

Have you had any heat issues with the decoder damaging the cables you zipped tied them too? I thought the idea was to try and suspend the decoder with zip ties in the engine bay as the decoder gets very hot whilst in use. Let me know how you went

Well it does say it was tested on a motorcycle tire. But I use thin performance tires on my car so itll still fill fast. Bigger tires like yours seems obvious it will take longer

Bought this for $15 lol

75 mins of run time of the furnace is not much actually. I was looking for something to keep running for about 2 days or so.

I came here hoping to find out how to open my bird feeder and I did! Thanks,

I have been looking for something for my pool filter, this looks good. But how much chemical this has? I see you are not using plastic glove when handling it.

2:48 What??? Why did it die? And AGAIN!? Are you saying the battery sucks? Or u didnt charge it up??

You are adorable sir.. i just may subscribe

I ordered this 2-3 days ago and it arrived today. I tested it out, the noise isolator personally really ruins the quality of the overall sound, from the voice, bass, treble almost everything (heavily the bass). I tried it without the isolator though there is a small buzzing or just small noise without the isolator, the sound quality is almost as good as the proper AUX cable straight from your phone to the car. In my case the straight aux from phone to car doesn't have any noise and the audio quality is insanely good, the only reason I got this was due to Bluetooth connectivity cause since I'm on a newer iPhone I can't charge and use an aux cable at the same time so this could let me charge my phone and listen to music via Bluetooth but it's for sure not as good specially while using the isolator. If you don't mind the small noise without the isolator which tbh you kind of don't even notice while listening to songs then I guess it's worth it. (I just tested it for 5-10 minutes gonna further test it in a bit)

Can i put that canbus inside headlight?

Wondering. Do you have daytime running lights? If so, do they work?

What is the name of that tool?!!

👍Ohio weather lol

I have a flikcering issue with mine but its only on one side, Should i install both of them or just a decoder on the affected side please??

nice video man! so is this means too that the DRL is drawing more power, maybe 30w? (say without the decoder is drawing 15watts) or still the same as the wattage of the LED bulb

Great Video! Especially about the Inducer Motor revving up and down like it was struggling. Question - How did you clear the nest out of the pipe? Did you have to disassemble it? Did you use a vacuum, or put a leaf blower in it from the inside somehow?

Combien ça court 'il

Does it leak oil like other saws when you're not using it?

How does this compare to the oak and iron?

Thanks for the video. I watched a few other "reviews" and not one of them did they actually use the compressor or even then it on. So thanks again for sharing your experience.

And the lamp is open 😮😮😮

Just like mine & I love it ! You did a great job !! Take care & stay safe❤

for each tire you have to recharge it. and it's very slow. and overpriced. who wants to pay $140 for this?

😊thanks!!! With this tool it’s literally impossible to pop the wire back on!

Mine has some loose oil too

Just rest your knee up against the seal next to the lock to stop it popping out. 2 second job.

I think my spring is too big so is there any other way I can get it in?

Bought the tool but it didn’t work. Spring is already 5” I need a 9” tool lol

Wait, that was it. Just how to apply the clear coat correctly? Fools. Tell the king how good his non-existent new clothes look.

I have had my inducer chip a blade due to some kid throwing a rock into the outside vent. Also I've had it fill with water due to the drain clogging. No rodent issues yet... Knock on wood.

How long does the treatment last for?

Start one side completely like you did, then do a 1/4 of the other side then grab a small hook tool and start at the 3 o’clock position while holding the other side and slide hook tool slowly from 3 o’clock to 6 o’clock and it should work. May take a couple tries to get it but not bad if u don’t have these pliers.

Best demonstration so far on KZfaq. Thanks

Thanks, I've been trying other ways 😡 in vain. Lol 👍🏽

Amazing how they don't need all those LED stuff (huge fans and those black boxes) it's like an halogen lamp. Wonder if the lifespan is good.

So I've been using the bird seed used in this video for a few weeks now, but for some god damn reason they keep getting into my bird feeder! It's really frustrating because the bird feeder is screwed into a tree and I can't really find or use any obstacles to deter them. I really don't want to resort to going down the path of treating them as pests, but I'm running out of options.

I built my own with snow blower tracks, couple deepcell marine batteries , tractor plow and some linear actuators. Far less than this would cost.

My 48 v did the same thing, I boughtit used so no warranty but, there is a switch bypass that I can try but if that doesn't work I'm back to shoveling uggh!!

decent review man, good job. yeah, you can pair them together, its a selling point. I use the m83 in my car but its too damned bassy, iut drowns out all mids. I want more treble and the EQ cant cut the bas down so I wont be buying another. it is awsome for home use though. I wanted to know how the 90 sounds in a car while driving. Im also curious if you can pair the 83 with the 90? and if not why? because the 90 can pair with another 90.

I think you need to aim your lights higher. Almost no light hits the sides, just downwards .

Is it wor for KZfaq?