8 ай бұрын
9 ай бұрын
9 ай бұрын
Жыл бұрын
Жыл бұрын
3 жыл бұрын
3 жыл бұрын
Пікірлер
@danokvoiceovers 10 күн бұрын
Will this work in audacity please? Thank you
@rodthemasterpiece 12 күн бұрын
yo!!! you are the man!!! I've been searching and searching with no avail. thank you!!! now I can make samples with no limitations!!
@Dagcenterdance 16 күн бұрын
Any chance there's a version on this template (or tips of similar templates) available for logic 10.2? This one crashes then I try to open it. Or could the crashes be a result of something else than my version? Stuck with 10.2 unfortunately.
@Keysjoao 16 күн бұрын
Very amazing
@CradleCat 14 күн бұрын
Thanks! always fun making some songs on stream
@geebee44 26 күн бұрын
Thanks!
@CradleCat 14 күн бұрын
Hope it helped on some of your projects! Thanks for checking out my channel!
@momoalnajjar Ай бұрын
i can see you've got a certain swagger
@CradleCat 14 күн бұрын
🎵 Have you checked out the full song?!
@cxmxg Ай бұрын
Thanks a lot! This was extremely helpful, I procrastinated learning this for years. For anyone like me who didn't have outputs showing in Kontakt, click on the third icon from the left in Kontakt's top bar. There you can select what to view; select Outputs.
@CradleCat Ай бұрын
Glad it helped! And yes - super common question is on that Outputs panel not showing up. Good callout there. Hope you're making some awesome music with it!
@MrJonsong Ай бұрын
Great I just bought a M2 Studio with the base storage. Was trying to figure out what the best way to configure Cubase and SD3 as the libraries are quite large
@CradleCat Ай бұрын
Oh nice, let us know what you think of the Studio! I've heard great things - I'm curious how quiet the fans are. My M1 Max Macbook Pro is virtually silent, and the fans almost never turn on. Hope this video helped with your Cubase / SD3 setup! Thanks for checking out the channel
@cedricledore8806 Ай бұрын
So which usb dock do you have ? Which trademarks are the quality ones ?
@CradleCat 14 күн бұрын
I need to make a video on that too. Right now I'd recommend the high end CalDigit ones. I've also recently seen a few other brands but haven't tested yet. Would be good to compare them at some point
@HenryGetz Ай бұрын
This makes me so happy. It feels like I just walked into a production studio, and someone gave me all their gear. Getting this set up on my own would have taken forever
@CradleCat Ай бұрын
Glad you found it helpful! What kind of music are you working on?
@mattfeedback Ай бұрын
Thanks for this dude -can't wait to try v soon 🙌
@CradleCat Ай бұрын
Let us know how it goes! Hope it helps you make something cool!
@RandomationsYt 2 ай бұрын
oh my god i hate kontakts User Interface
@CradleCat Ай бұрын
😂 I wonder if it's a limitation with Logic or with all DAWS. The built-in DMD and Drummers in Logic have a huge advantage (at least for mixing setup) in Logic cuz you instantly get all the separate tracks. At least with this you can save it in a Template and be done with it.
@missionlinguistiquefrancop6356 2 ай бұрын
Great. Merci from Paris
@CradleCat Ай бұрын
thanks for checking out the channel! Hope it helped with your music in Paris!
@kjsrocky 2 ай бұрын
dumb shit ever
@annemariebush3426 2 ай бұрын
Sorry the templates won't open in Logic Pro 11
@CradleCat 2 ай бұрын
thanks for letting me know! I'll try to do a round of updates to all these for Logic 11!
@annemariebush3426 2 ай бұрын
Really great stuff, again - thanks so much!
@CradleCat 2 ай бұрын
hope it helped on your music! thanks for watching!
@TheRTM 2 ай бұрын
I'm in Komplete Kontrol after creating of the channels (Stereo and Mono) and then I go to the mixer I'm not seeing the "output" section so that I can rout my drums?? .........Has NI moved it to another location?
@CradleCat 2 ай бұрын
Do you mean you're in Kontakt? (Kontrol is the keyboard hardware). In Kontakt, I believe you need to go to the Show Panes option, and make sure Output is selected 🙌 Sometimes that's not checked so it doesn't show
@TheRTM 2 ай бұрын
Thanks! you SOOOO much!!!
@CradleCat 2 ай бұрын
Glad it helped!
@jameswhitaker4357 2 ай бұрын
So you say you copy everything over, do you also delete the original file? I’m on a 500gb m3 pro (silly me) and I know my sessions will fill up my hard drive space quickly. I want to keep room for more plugins and virtual instruments I get down the line (Trilian was like 40gb!).
@CradleCat 2 ай бұрын
Do you mean when I move things from my old hard drive to my new one? Yes - I'll open up some things on the new hard drive just to verify it's all good there, but then I take it off the old hard drive. You might also find this video helpful - kzfaq.info/get/bejne/b9Rge9Z-mcCoZKM.html I run my sessions (project files) directly on my external SSD. I just have plugins, DAW, VSTs, etc on my laptop itself - so the 500gb shouldn't be a huge issue for you 👍
@ChaseMartinezMusic 2 ай бұрын
Lifesaver! Thank you!!
@CradleCat 2 ай бұрын
Glad it helped! Thanks for checking out my videos! 🙌
@dannyshoinz 2 ай бұрын
This is always a problem for me, I can come up with pretty good ideas in my mind but I just cant find the sounds that I heard in my mind in the daw when I actually try to make the song. So many wasted ideas :(
@CradleCat 2 ай бұрын
it can be tough! I think a lot of it is just playing with all the instruments and plugins so you can have a lot of sounds to pull from when your get an idea! That, or get really good at describing the ideas so you can work with someone who can help!
@dannyshoinz 2 ай бұрын
@@CradleCat great thanks for the suggestion man!
@luciaandreavita 3 ай бұрын
How do I get my google analytics code?
@CradleCat 3 ай бұрын
you need to set up a Google Analytics account and you can get it from there 👌 thanks for checking out the video!
@NATmusic27 3 ай бұрын
Ok but didn't you have any problems setting up an external ssd with you projects in it for cloud backup? I tried using google drive and it made couple of files in the projects corrupetd
@CradleCat Ай бұрын
Great question - I will do some more testing on this and confirm!
@Sham_Fl 3 ай бұрын
Thank you so much god dammn I was about to throw my computer by the window
@CradleCat 3 ай бұрын
it's even worse with an arpeggiator setting on
@whatever77999 4 ай бұрын
Thank you so much man.
@CradleCat 4 ай бұрын
Thanks for checking out the video, happy to help! Took me awhile to figure out the ideal setup and I wanted to share 🙌
@mclovin1498 4 ай бұрын
March 2024. It started happening to me today after I’ve had this new m32 for a few months.. honestly really annoyed with NI
@CradleCat 4 ай бұрын
Yeah, it still happens to me, too. Haven't found a full preventative fix even after trying other ideas from the comments here or other videos. This temporary fix is still my go-to
@barronimomusic6404 5 ай бұрын
Can you bounce these so each track becomes a separate audio file? (Make stems, essentially)
@CradleCat 4 ай бұрын
Yes - when exporting you can chose to export individual channels, or, when you right click to create Tracks for channels, that will let you export them as audio stems from the tracks.
@andrewlittlewood4850 5 ай бұрын
Going to do this now following your video!
@CradleCat 4 ай бұрын
Thanks for checking out the video! Hope it helps your setup! 🙌
@PavanSibal 5 ай бұрын
Great tutorial. Can you please share any videos you did on setting logicpro with various buses. Thanks
@CradleCat 3 ай бұрын
hey! Sure - this one is on using busses for reverb. kzfaq.info/get/bejne/hr6adaWCs7XHdmg.html thanks for checking out my channel! 🙌
@sojoemusicmeditation9709 5 ай бұрын
Great Vid!! Quick question, what type of laptop(gigs,speed, ram, etc) would i need to handle all the plugins for this template
@CradleCat 4 ай бұрын
Good question, but I'm not quite sure what the minimum would be. If it helps, it works on my old backup laptop: 2016 Macbook Pro, 2.9 GHz Quad-Core Intel Core i7, 16 GB. Storage would just depend on how much you're storing on you laptop (I also use external hard drives for this with music production, so actual laptop storage isn't as critical)
@KyleValet 5 ай бұрын
Thank YOu...really well explained!!
@CradleCat 4 ай бұрын
glad you found it helpful! Thanks for checking out my channel and hope it helped your setup!
@gersalialyricsofficial 5 ай бұрын
Hello my frends I have on problems with kontakt 7 wen I play with not recording its okay but wen I recording its to bad nots Only noises Pleas Help me to fixed
@CradleCat 4 ай бұрын
Try turning on Recording > Low Latency Mode in Logic. and then try increasing your Buffer Size setting in logic pro x
@Outlabyrinth 5 ай бұрын
Super Nice Could you do the same with VST ? Installed on external drive ?
@CradleCat 4 ай бұрын
I wouldn't recommend it. From what I understand, the VST themselves will perform best when installed directly on your computer/laptop. However, the sound libraries for those VSTs can be installed on external drives (that's what I do). Hope that helps and thanks for watching!
@Outlabyrinth 4 ай бұрын
@@CradleCat thx for the answer ;)
@suxgaming9038 6 ай бұрын
Bro looking straight through me💀
@CradleCat 6 ай бұрын
😂😂😂👁️👁️
@malachy2 6 ай бұрын
Great explanatory video. What's the song? Sounds great, and the recording/mixing sounds great too.
@CradleCat 6 ай бұрын
Thank you for watching, hope you found it helpful! The song is called “New You” 👍 here’s the link! open.spotify.com/track/1LD0IC4uma2eYampQqIFwk?si=7wkbt_V1Qp-0Vau6591DRg
@marcell7406 6 ай бұрын
backblaze for project file is goated btw
@CradleCat 6 ай бұрын
Thanks for the tip! I haven't checked that one out - what's makes it so good?
@Russelleo 6 ай бұрын
Hey great video, quick question tho, when in the kontakt window, after goin to settings, I don’t have the ‘options’ option or the tracks underneath, help?
@CradleCat 6 ай бұрын
Hey thanks! Good question - You'll want to click the panels-looking button toward the top of the Kontakt interface. This will give you other options of panes to include in your Kontakt window. Hope that helps, and thanks for checking out the channel! 🙌
@ryanlesser 6 ай бұрын
I could be wrong, but I think that you cannot sync multiple drives to Google Drive. I am having the issue currently where my internal MacBook pro drive is full and I would like to keep artwork on my internal drive and music production on and external SSD... but have all of it syncing with Google Drive (which is similar to the diagram at the end of your video). According to my research, this is not possible. If you know of a way to do this, please let me know. Thanks.
@CradleCat 6 ай бұрын
Hey! That should be possible (at least it is for me!) On your Macbook, go to Google Drive (app) > Preferences > Add Folder. Then just add whichever folders/drives you want to sync. Hope that helps!! 🙌 And thanks for checking out the channel!
@ReverendPerks 7 ай бұрын
I know this is a slightly older video but this just helped me so much, thank you!
@CradleCat 6 ай бұрын
Hey glad it helped!! Thanks for checking out the video. What kind of music are you making?
@zakaroonetwork777 7 ай бұрын
Please, What App are you using to Illustrate this presentation? Thank you.
@CradleCat 7 ай бұрын
I'm using draw.io in this video! 🙌 Thanks for watching!
@TomasTrulsson 7 ай бұрын
Very nice and good stuff. However, it didnt work on my gear. Im using Mojave 10.14.6 and logic pro x 10.3.3. Do you have an old template that may work for me?
@CradleCat 7 ай бұрын
Hey thanks for checking out the video! And no, I made the template after those versions, so I don't have anything that would fit for those. It'll be more work - but you could also re-create it manually in a project, then click Save As Template when you're done! Hope that helps a bit!
@TomasTrulsson 7 ай бұрын
@@CradleCat Thanks for the reply!
@johnviera3884 7 ай бұрын
how did you get -1 bar at the beginning of your project? also can you change the pitch of notes for each dum hit in the piano roll?
@CradleCat 7 ай бұрын
On the bar labels - there's a tiny triangle on the left side, and you can just drag that to the left to start you project before the 1 bar 👍 On the pitches - I don't think piano role works for this setup (it's mainly for output control). I haven't tried getting pitch control via piano roll with Kontakt yet - I usu just automate the pitch (from the pitch/tune knob within Battery) when I need to do that. Hope that helps! Thanks for checking out the channel!
@GeraldLawMusic 7 ай бұрын
Very helpful. I'll be organizing my files this weekend. Thank you!
@CradleCat 7 ай бұрын
Glad you found it helpful! Let us know how it works for you and what cloud backup you end up using! 👍
@Capuseen 7 ай бұрын
Thanks so much!!
@CradleCat 7 ай бұрын
You're welcome! what kind of music are you making with it?
@Capuseen 7 ай бұрын
Hi@@CradleCat ! My goal is to go further on Logic to be able to finalize songs in clean demos. I will see if I go further after that (to fully produce or to work with a pro). My music style : indie/pop/rock , with voice, guitar, bass and synth tracks, in French; I will also explore adding other digital instruments (cello, brass, samples..); So I am at the stage of exploring basics in logic, but also in music production (gain staging, EQ, compression, etc.); voilà 😊
@no111re 7 ай бұрын
would you ever create a pop punk vocal preset to download? can’t figure it out or find anything anywhere for logic!
@CradleCat 7 ай бұрын
that seems like something I could do! I love pop punk so that would be fun to work on
@no111re 7 ай бұрын
@@CradleCat that would be sick, thank you!!
@hmcvm 7 ай бұрын
This is amazingly helpful - thanks so much for sharing!
@CradleCat 7 ай бұрын
Hey glad you found it helpful! Thanks for watching 🙌
@j.gregmorrison1953 7 ай бұрын
I’ve run into a problem. Other than one of the loop tracks, the rest of percussion loops are silent even though I can see the levels on each.
@j.gregmorrison1953 7 ай бұрын
Found that my vocal track was muted. Why would this affect the other tracks?
@CradleCat 7 ай бұрын
Where is your routing set? I would check the output of the percussion tracks you can’t hear. If they’re going to a bus, that might be muted.
@j.gregmorrison1953 7 ай бұрын
@@CradleCat Thank you!
@afiefzaki6265 7 ай бұрын
Now I’m wondering what it’ll sound like if you re-record those mumbling BVs with the actual lyrics. Will they add to it. Or will they make no difference. Bcs I might just leave my BVs like that too😂😅
@CradleCat 7 ай бұрын
Only one way to find out 🤷♂️ idk if it’ll work on every background vocal, but I’m definitely keeping my ears open to it more now that it’s worked well once for me
@ayodelesunday2130 7 ай бұрын
Great stuff here! Please can you talk about what goes in the send section, co i believe that also contributed to the beauty of the sound. Thanks
@CradleCat 7 ай бұрын
Hey glad you found it helpful! A little more focus on the Sends section is a good video suggestion 🙌
@daveyduke83 7 ай бұрын
Never knew what the glue tool could do, tha ks great video! After you have fully tuned a track, do you keep it in auto flex or bounce down and switch to a new track to save cpu?
@CradleCat 7 ай бұрын
I’ll typically bounce it down to a new track alternative and turn of Flex. I use track alternatives for stuff like this instead of new tracks (that might be a good next video topic for me 👍)
@daveyduke83 7 ай бұрын
@@CradleCat totally! Now I'm googling track alternatives, never hears of it