Yes, you need sublimation paper, and you also need to make sure you have a sublimation printer.
@brycie27062 күн бұрын
Can I ask what paper did you use and is this dishwasher safe?
@KatieAdamsКүн бұрын
If washed in the dishwasher the image will fade so it is best to hand wash. I used sublimation paper. I ahve a complete supply list in the description of the video.
@bklyngrl732 күн бұрын
I found this video extremely helpful so thank you very much 😊
@KatieAdamsКүн бұрын
Glad it was helpful!
@lisaruiz72113 күн бұрын
Why it that every time I look for an image on google and save it when I go into cricut to upload it it has a bunch of thorns outlining the image?
@KatieAdamsКүн бұрын
It could be that you are uploading a low resolution image. Make sure sure to upload hi-resolution images so you get a smooth cut line.
@benjamincartwright29236 күн бұрын
Is there a way to make the Jell-O stiffer?
@KatieAdamsКүн бұрын
If you use less water the jello will be stiffer. But I couldn't find how much to leave out, so it looks like it is just trail and error.
@createdesigns63898 күн бұрын
so are you printing as a P-n-C are basic cut. Also how would you print it without cricut cutting through each letter if its a word logo you did in Canva and brought into cricut space? I am so confused. Like can it be printed on sticker paper without having to offset it.?
@KatieAdamsКүн бұрын
The font I used is a font in Cricut Design Space. Cricut Design Space is the design software used with a Cricut Cutting Machine. This design is only to be cut. I am using a cursive font, so all of the letters touch, then I can weld the letters together so it cuts as one piece.
@piperfairchild8559 күн бұрын
I love it❤
@piperfairchild8559 күн бұрын
I love it❤
@piperfairchild8559 күн бұрын
I love it❤
@piperfairchild8559 күн бұрын
I love it❤
@piperfairchild8559 күн бұрын
I love it❤
@piperfairchild8559 күн бұрын
I love it❤
@KatieAdams8 күн бұрын
Thank you so much! It is a fun project. you can grab the free SVG from my website. thecraftyblogstalker.com/downloads/one-in-a-melon-free-svg/
@laurelthompson61679 күн бұрын
E 6000?? cant read tube label
@KatieAdams8 күн бұрын
Yes, it is E6000 glue. You can find the complete supply list with step-by-step tutorials on my website. thecraftyblogstalker.com/diy-sea-glass-wind-chime-craft-kit/
@lindasuehundley686413 күн бұрын
Ty for the demo. Where can I find card stock of this size? ❤
@KatieAdams8 күн бұрын
You are welcome! ❤️ Cricut has it available to purchase on their website. cricut.pxf.io/xk5qxv You can also use poster board from the dollar store.
@Crystal_Pawss13 күн бұрын
As a quadrobist, I give you my deepest gratitude and support.
@Elvenroses11 күн бұрын
Same But also it’s cold
@PrincessBoakye-hz3nz9 күн бұрын
Sameee i awakened and i wanna try make glovess
@KatieAdams8 күн бұрын
You are welcome! ❤️
@comet_coyote133 күн бұрын
As a therian, I agree.
@veelopez283414 күн бұрын
This looks so cool
@KatieAdams8 күн бұрын
Thank you, they are delicious too!
@thusharigeshadee241919 күн бұрын
Awwwww rip your 🐶😭
@KatieAdams16 күн бұрын
Thank you so much. It was hard to loose her. ❤️
@user-ev2qo1hj1g20 күн бұрын
Female Bob Ross. I like her 😊
@LeviundercoverNottobeseen20 күн бұрын
Couldn’t even tell they were socks!
@strawberryClouds-bm7uk23 күн бұрын
Tysm ^^
@KatieAdams16 күн бұрын
You are so welcome!
@Jessbudgets26 күн бұрын
The clip doesn’t go across easy when I install mine, I’m scared incase I break the clip. It seems a bit wider (the housing) I have a cricut maker 3 x
@KatieAdams16 күн бұрын
Hello, all blade housings are the same size for the maker and explore, it is the inside that holds the blade that is different.
@KatieAdams27 күн бұрын
Get them here - pboost.me/n9k8VdEc (affiliate link)
@SwapnilBhartiya27 күн бұрын
why can't you put directly on car instead of using the transfer tape?
@KatieAdams16 күн бұрын
The vinyl can stretch and tear when not using transfer tape.
@cathyrandolph713528 күн бұрын
I actually have that Torani syrup! I would have never thought of using it this way.
@KatieAdams15 күн бұрын
Absolutely. Its delicious!
@janethunter6653Ай бұрын
Lady...they sale plastic Christmas balls for far less than you made that one ornament at Walmart.
@KatieAdams16 күн бұрын
Yes, I understand that but if you wanted brown ornaments and couldn't find any, this is any easy fix. Plus it works with pattern balloons!
@kimrussell6081Ай бұрын
Thank you so much
@KatieAdams16 күн бұрын
You're most welcome
@rayogrady4349Ай бұрын
Your video was excellant. I recently laid down vinyl graphics. I watched your video several times. The graphics took a considerable amount of time. Of course i did flub in a few spots which i expected. If i didnt come across your video it would have been a disaster no doubt. Thanks again for the excellant tutoriol. Just a note this was my first time. Was i nervous......damn straight i was.
@KatieAdams15 күн бұрын
Great job!!! I flubbed in a few spots to so don't be to hard on yourself. You did it!!
@carollewis1644Ай бұрын
Great video. Maybe you could do an updated one with the new size and updated Design Space changes. Thanks!
@KatieAdams15 күн бұрын
Great idea!
@gideons300club3Ай бұрын
you failed to say what paper you used for the print
@KatieAdams16 күн бұрын
Click down to the description of the video and I share all supplies used. Thanks for watching!
@HastyPlace2Ай бұрын
Would it start to unravel or whatever it's called?
@KatieAdams15 күн бұрын
It can unravel if picked at. It also depends on the socks that you use.
@HastyPlace215 күн бұрын
@@KatieAdams Okay! Thanks for the info!
@jaymi-leighcarswell1375Ай бұрын
was it sublimation paper that was used?
@KatieAdams16 күн бұрын
Click down to the description of the video and I share all supplies used. Thanks for watching!
@dawniebee946Ай бұрын
Love it ❤
@KatieAdams16 күн бұрын
Thank you so much!!
@refaeladirАй бұрын
Thanks for the video. Wonderful. Is it possible to insert any type of paper (of the appropriate size) into the machine?
@KatieAdams15 күн бұрын
Thank you, and yes you can! The machine takes materials up to 2.mm thick.
@refaeladir15 күн бұрын
@@KatieAdams Thank you (:
@michaelcweissmanАй бұрын
Great job! I suppose, were easier with the help of a second person. 🤙🤙🤙
@KatieAdams15 күн бұрын
Thank you so much. Yes, a second person would make it easier, although you'd still want to do the hinge method and hold the design with pieces of tape.
@daltonricketts6799Ай бұрын
very easy to understand. thank you for sharing. have you tried welcome vertical signs yet? i need help with that as well
@KatieAdams15 күн бұрын
Thank you so much, I haven't wood burned vertical signs but I did make this porch sign with a Cricut stencil. kzfaq.info/get/bejne/fblxgMqDx6iYiYU.html
@ThaArcticPawzАй бұрын
TYSMMM!!! First did it on a practice sock. And i need better siccors but they still look so good!!!! XOXO
@KatieAdams16 күн бұрын
I am so glad that you made them!
@Imunderyourbed165Ай бұрын
Can you do like short socks?
@LeviundercoverNottobeseen20 күн бұрын
It’s probably just the same but they’d just be fingerless gloves and not arm warmers
@KatieAdams16 күн бұрын
Yes, I agree with @LeviundercoverNottobeseen. It would work, just would be sleeves, more just over the wrist.
@Weird_guy79Ай бұрын
So disapoint I fell for cricuts fake advertising, can't do images without a very expensive printer and very expensive ink, and the cricut cutter is not even needed.
@Weird_guy79Ай бұрын
Can't do much of anything without spending hundreds more for accessory and other supplies.
@KatieAdams16 күн бұрын
I am so sorry you aren't a fan of Cricut, that is ok. I am trying to help those who are fans and looking for tutorials.
@lorrisalonАй бұрын
Thank you for reviewing these products! I have used the "Lanbeide Diamond Painting Sealer" and Mod Podge Super Gloss". Some remarks about the Lanbeide; after deciding to put 2 coats on since it was a larger painting (60 X 45 and I wanted to hang it on the wall), the SECOND coat dried cloudy/milky/dull on and between the drills. I should not have done 2 coats but it didn't say you couldn't. It did mention "curing time" which depended on the thickness of EACH LAYER. One coat looks good. The company does not have any customer service contact information ANYWHERE. Wondering if there is a way to restore the diamond luster and take away the milkiness between the diamonds? As for the Mod Podge Super Gloss, it dried nice and shiny but with a little tackiness. Next time I will add some water to see if that helps the tackiness. Any advice/help regarding the above would be appreciated. I have also tried to contact Lanbeide through Amazon but have not heard anything as yet. I really want to hang that painting, but I can't display it in its current condition. ☹
@KatieAdams16 күн бұрын
I am so sorry you didn't have great results, the sealer should be applied thin to keep the sparkle luster of the plastic drills. Sadly I don't know of a way to remove the sealer.
@pamelatheado6484Ай бұрын
So cute. Looks like fun
@KatieAdams16 күн бұрын
Thank you so much! You should make one, they are so fun!
@tbott4510Ай бұрын
Great video!! ❤ Do you also use a spray paint sealer? Thanks!
@KatieAdams16 күн бұрын
Yes, I did use a clear coat spray to seal the beads.
@tbott451016 күн бұрын
Thank you! ♥️
@KatieAdams15 күн бұрын
@@tbott4510 You are welcome!
@carlosllama9979Ай бұрын
Outstanding job I think it came out. Awesome question can you do mine and yes, I’m serious….
@KatieAdams16 күн бұрын
🤣 You can do it, I promise!
@diklacohen55742 ай бұрын
😀😀😀You are a champion😀😀😀
@KatieAdams16 күн бұрын
🤣 Thank you! 😂
@rickyricardo43312 ай бұрын
I used three of those when I was sealing my jigsaw puzzles and the duraclear was by far the best (they make the resin I use for paracord charms). The Mod Podge always left a cloudy look and the triple thick was a pain to apply. I'm about to finish my first diamond painting and was going to use my Rose Art puzzle glue (dries almost as clear as resin).
@KatieAdams16 күн бұрын
Thank you so much for sharing your results!
@veelopez28342 ай бұрын
First comment
@KatieAdams16 күн бұрын
Yay!!!! Thanks @veelopez2834
@char_lene_2 ай бұрын
Great tutorial! I noticed this video is 2 years old. Can you give an update on how the decal is doing or how long it lasted? My husband wants me to make him some decals for his work truck, and this video helped a lot! Thank you 🙏
@KatieAdams16 күн бұрын
I recently sold my jeep to get a new one, and I sold it with the decal still on it. There was very little damage to the decal, and I wist the car wash weekly. There was one tiny little part that tore off, but honestly you couldn't even notice. The decal was put on in June of 2021 and I sold the Jeep in May 2024, so almost 3 years!
@char_lene_14 күн бұрын
@KatieAdams Wow, it sounds like it worked out great! I'm going to give it a try with my husband's truck🤞 Thank you so much for the update 🥰
@firstnamelastname92302 ай бұрын
I love the glare you gave towards the dogs lol.
@KatieAdams16 күн бұрын
LOL! 🤣 😆
@Texasmeowchannel2 ай бұрын
i made them with pumpkin halloween socks with orange stripes and its so cute
@KatieAdams16 күн бұрын
So cute!
@user-rq2lp5sr9o2 ай бұрын
I tried it and the tips curles loke my hair
@KatieAdams16 күн бұрын
I am sorry but I am not quite sure what you are meaning.
@user-rq2lp5sr9o16 күн бұрын
I meant like the tips or edges of my socks curled
@KatieAdams15 күн бұрын
@@user-rq2lp5sr9o That is normal since there isn't a hem to hold it flat. If you want it flat, you could sew a hem along that edge.