My mower!! It will be 19 years old in July. I just had the brushes replaced - runs great! I had bought & returned a MM2000 because the handle length could not be adequately adjusted to fit my height. I was glad to get the old Lawn Hog repaired. At 6:30 you had the problem with the blade hitting the nut. Was that problem resolved just by smashing out the debris under the hood (8:36)? Sort of a realignment or did I miss something? Thanks for the video!
@1Patient19 күн бұрын
Thanks for commenting Debbie. The issue with the nut wasn't an issue and resolved itself once I used the mower, and secondly, the debris had nothing to do with the blade mechanism. Keep your tools clean 😃 Have fun mowing. Thanks for watching.
@qkcam4523 күн бұрын
any suggestions ? I can get the lock to pop up yet as soon as I take the antenna out the lock drops and can't get in. thanks
@1Patient23 күн бұрын
Use the bottom of the antenna insert the bottom part under the handle when you lift it. I know it flexes and feels spongy when you are pushing up on the locking mechanism inside the door. When you lift up on the handle don't pull up too much, when you wiggle the antenna lesson the pressure on the handle so the locking mechanism can have less friction/pressure on it, allowing it to, ummm, slip into the unlocked position. Also, hold the antenna close to the door handle when you are wiggling it, so as to maintain the stiffness of the antenna as a tool. Keep working it, it will take a few tries... You are on right path, stay the course.... let us know how you did. Thanks for watching 🙂
@ricky492425 күн бұрын
I have two full sets of these one set I’ve had for 10 years , I will never own another brand ever
@1Patient25 күн бұрын
I bought a second one as well recently and its my daily driver. Hope your having as much joy with your bars too. 😃 Thanks for watching.
@realone4261Ай бұрын
Your awesome
@1PatientАй бұрын
Thanks 😃 for Viewing. Glad things are going well now.
@Rashanmohamed123Ай бұрын
Wow
@louisbeaulieu1066Ай бұрын
Not to many video on this thank you !!
@1PatientАй бұрын
Thanks for viewing. Have fun tooling on your vehicle.
@vermagnus2647Ай бұрын
You are teaching the people wrong man
@1PatientАй бұрын
It was my first attempt. I have learned much since the video was originally made. 😃Thanks for viewing.
@moparlarsson2 ай бұрын
Expensive? Perhaps but it's a once in a lifetime investment and you can't say the same about much these days. We get one for about 1000sek here in Sweden.
@chriscolameco68502 ай бұрын
Think that adapter will work on the ridgid?
@motojgiveaways14512 ай бұрын
I have the same exact head unit. My phone automatically connect to the head unit via Bluetooth. If I get a call the cal comes through just fine through the head unit. My problem is the Bluetooth option under source on the head unit to play music through the head unit. Please if you have any advise let me know
@creamfiend842 ай бұрын
Installed an Izumi eco onto my omniums this month, initially it sounded noisy, this is pre-ride. First test ride was not as noisy I’m guessing my weight and road contact was a factor, second and third ride a little sound but stealth like. This is my new dream build a leader kagero so I was stoked riding it any sound from the chain was kind of irrelevant 😂
@jerryhicks81672 ай бұрын
What do we use flat head for?
@1Patient2 ай бұрын
😃 I guess you don't need the flat head, if you have finger nails, Thanks for watching.
@gallagherneylon69662 ай бұрын
🙃 'Promo sm'
@juliodg21393 ай бұрын
good video, great selection of impact tools, I bought the same one at Home Depot, when I opened it it came without a plastic bag, I'm intrigued, I've seen many unboxings of this impact tool and they all come covered in a plastic bag., the bag is nothing, but I don't want something that someone returns, you know, well, thank you for your video sir.
@1Patient3 ай бұрын
Thanks for Viewing. I don't blame you. I bought the M12 Impact with a 5.0 High Output battery, and when I looked at the battery package when I got home, it was slit open on the bottom, and upon closer inspection of the battery, it looked like a fake/clone, and it was, I took it back to the Home Depot and returned it, didn't even tell them what happened I just said I didn't want this battery and that was that. I bought another one after I inspected the packaging and the battery more closely before purchasing. They keep it behind locked displays, so, someone must have done a switcharoo or something.
@zaneallen13273 ай бұрын
Your crush sleeve probably needs to be replaced
@1Patient3 ай бұрын
Thank you for viewing and commenting. I have moved on from this project.
@HillbillyRefrigeration3 ай бұрын
Is that your BFH?
@1Patient3 ай бұрын
😂Yes, my go to when things aren't going good.
@Chronikx13 ай бұрын
Still have any?
@1Patient3 ай бұрын
I am sorry we missed each other. I had one pair left. Perhaps for the next eclipse... 😀
@Chronikx13 ай бұрын
@@1Patientall good! I ended up making a viewer real quick and worked out great
@bradyali86963 ай бұрын
Where can I purchase those? Thanks!
@1Patient3 ай бұрын
I am sorry we were not able to connect. I did have one pair left over. Hope you were able to enjoy the eclipse.
@joemcrane3 ай бұрын
Awesome, thank you
@1Patient3 ай бұрын
Thanks for viewing. 👍
@johndiscord91293 ай бұрын
hi! a question, my fixed gear bike makes the same sounds as you but when i back pedal, a clicking sound is occuring but not always just occasionally
@johndiscord91293 ай бұрын
how do i fix this thanks! ❤
@chapsteronetime20003 ай бұрын
I did D 2 for the deaf bonce 8”s 1600 800rms I plan on wiring them to the series parallel down to 1ohm. Now I just did a single sub in my wife’s car 12 CT sounds but I used the $400 digital audio Steve mead shit online to set the hole speaker up behind spline mono 600w etc, I no I hope I didn’t fuck up w these four 8’s!
@Arabella3163 ай бұрын
𝓘'𝓶 𝓼𝓸 𝓭𝓲𝓻𝓽𝔂 𝓶𝓲𝓷𝓭𝓮𝓭😅
@joseespparza61243 ай бұрын
tnkio this help
@derekreilly10393 ай бұрын
Was there a 6.2 in some of the denalis
@scottloutner52533 ай бұрын
That would be a nice chart all typed up.
@trumanray66264 ай бұрын
10.5 will run great on 87 over 11 wont im interested
@dogwithwaffle80064 ай бұрын
Yeah but how do you remove it man
@1Patient4 ай бұрын
torch, heat the ring, could use slide hammer, could just cut it off as well. Thanks for viewing.
@louisbeaulieu1066Ай бұрын
With a bearing puller
@elenaives16994 ай бұрын
You are my new best friend!!! Thank you !!!
@1Patient4 ай бұрын
We could always do with more good friends 😃
@againstthywill5 ай бұрын
Literally got off work. Came in the house. I realized i didnt have my keys and boom. Locked in the truck. Lost the spare key. Been stressing it since 1030 last night. Its now after 4am. Saw this video. Boom unlocked in 5 minutes holy crap! Thank you so much!
@1Patient5 ай бұрын
Glad it worked out for you @againtthywill Thanks for watching. Have a great day. 🛻
@garrettgiuffre72985 ай бұрын
What iron is that
@1Patient5 ай бұрын
@garrettgiuffre7298 😂 That Iron is a Piece of Crap 60 Watt nextech 6412006 I found out it works better when the tip is tinned properly and that the tip is held securely with the screws that keep coming loose... lol Thanks for watching.
@idoewannautewno5 ай бұрын
Pure rocket science 😂
@1Patient5 ай бұрын
SpaceX Science 😃 Thanks for viewing.
@idoewannautewno5 ай бұрын
Indeed. I knew it was rocket science I wasn't 100% sure of what caliper of rocket science it was but spaceX caliper makes sense. 🤔
@1Patient5 ай бұрын
@@idoewannautewno 😆 when I was early on in my channel I was looking for content and this seemed interesting. I'm still struggling, however, I think the story telling in the newer videos has improved lots.
@mrafitzy175 ай бұрын
I wish there was more context although it's unnecessary 😅😅😅
@user-tc2ky6fg2o5 ай бұрын
The coolest intro in the history of power tools ever!
@1Patient5 ай бұрын
Glad you enjoyed it 😃
@mdemory5 ай бұрын
Flux sir 😂
@1Patient5 ай бұрын
Thank you for the comment. That is a good suggestion. For some reason I thought my solder has flux in it. I've been watching some videos on pcb repair and they really like using Flux don't they. I'm going to get me some flux for future projects. Thanks for watching. Have a great day.
@whatsfordinner215 ай бұрын
thanks for the original link over here bud
@whatsfordinner215 ай бұрын
subbed purely based on the intro of thi s video. love how its not even insurrection day, but rather the 14th. my birthday is on insurrection day lmfao. i enjoyed watching from my couch.
@1Patient5 ай бұрын
I was hoping to get some traction on this video with the title...there is always Part 1 >>>kzfaq.info/get/bejne/n-B_p7yo2pywlok.htmlsi=LLDe5S1L7nKJfvy4 👍🏻 Thanks for watching from your Arm Chair 😀
@thomasarmstrong12715 ай бұрын
whos making your units
@1Patient5 ай бұрын
Vitre on this Job. Also had some E-Glass that was coated on Surface #1 with some kind of Electrical Grid that absorbed Solar Energy and put it back into the buildings power grid. vitre.us/
@joyhodgson25265 ай бұрын
Great video Joel.🙂
@1Patient5 ай бұрын
Wait till you see Part 2 😀
@holden38456 ай бұрын
Ridickulous
@cielosordo6 ай бұрын
on the contraire, that's the sound of a drivetrain smooth af once the new chain starts to settle up and the pins get more use, the sound will eventually fade
@eKcBlaze6 ай бұрын
So you happen to use amd hardware in your pc? I always ran into this issue as an amd user and i never got it to work properly. I'm about to build a new PC this month and I've been wondering about this for years. I was a GoPro 8 user but stopped due to never being able to use my videos properly. If this is still a problem I assume I need to go the Intel route.
@1Patient6 ай бұрын
No AMD. Intel, Western Digital and Kingston components. I bought the CODEC and I can use the files in OBS and DaVinci and KZfaq Live Stream.
@julietbeasley47866 ай бұрын
"PromoSM"
@hobopro696 ай бұрын
I think you should call and tell them what happened. Maybe they will make it right.
@miguelsantiagocantillanafe96806 ай бұрын
Me pasa lo mismo, compre una cadena de medio eslabon, peeo no se si sera esa ma causa del sonido 🫤
@Beautiful-Places-Toronto7 ай бұрын
Happy holidays
@hobopro697 ай бұрын
Cool
@iamthelightoftheworld50287 ай бұрын
Recommendation listen jesse lee peterson
@1Patient7 ай бұрын
Hellelujah
@allywolf91827 ай бұрын
Big hugs Santa!
@1Patient7 ай бұрын
There better be something under that tree 🌲 for me. 😃
@paulclissold15257 ай бұрын
the poor used to salve themselves with the afterlife. remember to vote christian at the next election.
@1Patient7 ай бұрын
Personally I'd vote American if I was American. Trump would likely get my vote if I was there. Not because of Christian, but because of the "getting things done" mantra, and ya, it does come with some caveats like corruption, but that's been going on in every culture since the dawn of time. 🗽