Interesting, what gave you the idea of stacking the rings? I assume the silicone is the bottom ring??
@abyss_mk2 ай бұрын
I honestly wasn’t sure how much silencing I wanted, and was worried about too much pre-travel so I wanted to play it safe and get multiple sizes. Poron ring is closer to pcb so I guess that’s the bottom one? I haven’t bothered trying to switch them up and do different combos since I am happy with how it turned out.
@keagan53792 ай бұрын
Dang I thought this set was ugly until I saw it on this board. Nice choice
@stealthkbd3 ай бұрын
red plate goes hard with this combo. sounds great too
@juantoreno3 ай бұрын
the orange on the back is amazing
@oakerface953 ай бұрын
👀👍! waow that sounds pretty nutty.
@hushsicles3 ай бұрын
where'd you get the clear feet?
@abyss_mk3 ай бұрын
They’re just the stock feet, the color isn’t clear just slightly lighter than the black coat
@IreallyLoveDiamond4 ай бұрын
do you feel the stock mx2a is good? or need to clean relube or any mods? do you feel like it's overlube?
@abyss_mk4 ай бұрын
For mx black it’s an improvement on mx1a, but personally I will still spring swap and lube/film. I didn’t bother cleaning. For mx brown you can use them stock imo.
@user-qu4eh8nu7c4 ай бұрын
damn where do u source vintage mx blacks? I cant find any in my area
@user-qu4eh8nu7c4 ай бұрын
damn this sounds crazy for an ergo board, most ergo boards I hear sound rlly dense and muted
@user-qu4eh8nu7c4 ай бұрын
the mx2a has factory lube on them, so do you think that it will make breaking in less effective?
@abyss_mk4 ай бұрын
I felt like these broke in better than hyperglides but obviously ymmv with batch variance
@198Immortal5 ай бұрын
nice comparison... perfect timing for f1 8x v2 group buy! still deciding between fr4 and cem 3 for plateless option. i'm worried cem 3 will sound too thin plateless especially after hearing this sound test, what are your thoughts? i definitely prefer the spacebar for the cem 3 but alphas sound weaker to me
@abyss_mk5 ай бұрын
Hard to tell how it will sound since it depends on your switches and keycaps. You also have options on where to put those plateless contact points. You could always just clip in switches and wait to solder until you find a sound you like. Also can swap the spacebar switch with a long pole if you’re looking for it to sound different.
@artif1ce1357 ай бұрын
Hi i was just wondering about the qmx stabs how do they compare to regular cherry clip ins?
@abyss_mk7 ай бұрын
QMX has much tighter tolerances so they are way easier to tune so that they don’t rattle or tick. Also the wires are fully covered, so it helps with pet hair if you have any furry friends.
@artif1ce1357 ай бұрын
@@abyss_mk thanks
@treeleaf64717 ай бұрын
The abyss
@offbrandbiscuit7 ай бұрын
Only good-sounding Vega imo
@Jumboloydefelix7 ай бұрын
Nice. Where can i get?
@user-qu4eh8nu7c4 ай бұрын
good luck, you cant
@Jumboloydefelix4 ай бұрын
@@user-qu4eh8nu7c why?
@user-qu4eh8nu7c4 ай бұрын
@@Jumboloydefelix uhh there is alot of people trying to get one, but searching on mm wont get u anything since they're rlly rare and sought out for. Also if u do find someone with a tgr jane v2 ce they're prob flipping it for thousands of dollars. U prob get better results from a keyboard like f1-8x v2 or a neo 80 they're rlly solid boards. Since a tgr jane v2 ce is a keyboard designed years ago so it wouldn't be as high quality as a keyboard designed and made now. But people still want that board because if u tell a keyboard hobbyist that a board is rare and old they lose their minds.
@oscarsanchez2988 ай бұрын
just listend to the your vint black sound test, and I will say, these sounded better. Interesting.
@abyss_mk8 ай бұрын
For sure! This build is more lively sounding but a bit fatiguing to listen to all day
@oscarsanchez2988 ай бұрын
@@abyss_mk ahh something I didn’t really think about. I usually just switch too another board if that is ever the case.
@oakerface958 ай бұрын
👀👍! the marble-like coating on the case looks so good! (the recording sounds somewhat muffled)
@Fearlesskirii8 ай бұрын
i just wanna know what case that is. can't find it at all anywhere for some reason
@geonfeetpic8 ай бұрын
case? you mean the kit? its the jane ce v2
@plinx.8 ай бұрын
good luck finding one without having to sell an organ or remortgage your family home
@geonfeetpic8 ай бұрын
@@plinx. just break into their house and steal it easy
@oakerface958 ай бұрын
👀👍! would you prefer the sound of the mx2a over hyperglides then?
@abyss_mk8 ай бұрын
I don't know yet, think I need to try them on a few more builds first
@itsyaboi69420haha8 ай бұрын
I need this so bad, is there anywhere where i can buy these exact parts?
@abyss_mk8 ай бұрын
The F1-8X is released periodically by geon. I recommend joining the discord for the schedule geon.works/
@pokepokepoke648 ай бұрын
This was recorded with a toaster
@grubbygeorge21178 ай бұрын
With keyboards like this, there's no budget left for proper recording equipment. A toaster will have to do
@TyrellW8 ай бұрын
wow, sounds amazing! did you record this with a logitech c920?
@abyss_mk8 ай бұрын
Yes a nokia 6280
@actualglacier8 ай бұрын
good shit
@xirxirxir8 ай бұрын
higher pitch spacebar is nice. sadly the CEM3 that came with my 722 was my first solder board and i messed it up and at the time the galatea CEM3 werent sold by US vendors yet. maybe ill pick one up to change things up.
@mintlata8 ай бұрын
How consistent is the prelube? Did you find any inconsistencies in the housings? Someone said the top pushed the stem a bit down after opening them up
@abyss_mk8 ай бұрын
It looks exactly like how prelubed new nixies are. Some switches have excess in the bottom housing, but the lube is thin and easy to clean. I don’t have any noticeable issues with the housings.
@serbadork8 ай бұрын
out of curiosity, how did you break these in for 1M+ actuations??
@abyss_mk8 ай бұрын
These were broken in with the feng studio break in machine
@artif1ce1359 ай бұрын
Nice ! Btw what stabs did you use?
@abyss_mk9 ай бұрын
This build was done with staebies
@ProtomanZ9 ай бұрын
I want an F1-8X so bad. I can hear the difference and I think I like the sound of the CEM3 more than the FR4.
@mintlata5 ай бұрын
F1-8X V2 is happening right now
@ProtomanZ5 ай бұрын
@@mintlata I know, I just ordered mine.
@xspvv9 ай бұрын
funky keycaps
@hectaifernandez11 ай бұрын
I really like this. How did you get ahold of these switches? Desoldering from old Razer boards?
@abyss_mk11 ай бұрын
Yeah exactly, it came from a super dirty razer board. Bit of a pain to desolder all LEDs and switches. I also cleaned these with an ultrasonic cleaner. Honestly I would recommend getting new mx blues but if you want to have some fun I can’t stop ya!
@actualglacier Жыл бұрын
chad move to go with pretools
@abyss_mk Жыл бұрын
Hi Glacier your F1 vids convinced me to pick up this board
@actualglacier Жыл бұрын
@@abyss_mk hi and aww, I hope you're enjoying the board! do you like it? really good sound test :3
@t-tunknown3670 Жыл бұрын
I hate this
@luci2305 Жыл бұрын
Nice
@springpocket6941 Жыл бұрын
but why?
@hongwei4809 Жыл бұрын
man the audio is coming from a weird place through my headphones, great vid though
@skystrobe3325 Жыл бұрын
Very nice build, fellow razer green enjoyer
@robertfrippers Жыл бұрын
👑 👑
@Agent_Alpha Жыл бұрын
This .... this should be a crime
@rickysoora7930 Жыл бұрын
this is suprsingly nice
@NomadicAssassin1 Жыл бұрын
this is so forbidden
@george8920 Жыл бұрын
I love Razer greens but I just tried some Box Jade Greens in my Rama M65-b and Im totally blown away ! - they def feel different to any other clicky switch I've ever used in a good way - fuller and thicker feeling - more substantial than click jacket switches -
@abyss_mk Жыл бұрын
My favorite click bar switch is probably the nk sherbet. Click jacket is just such a throwback though so I have been appreciating it more lately.
@geonkr Жыл бұрын
nice
@Sclqrr Жыл бұрын
but why?
@metalskinn460 Жыл бұрын
You are diabolical 🤣
@dimaspenggalih Жыл бұрын
Sometimes I missed my clicky switch, so I put it on the ESC key of my daily keyboard