So $8-10 in material cost for a sign that only sells for $24 on etsy...You must not value your time much.
@catb2910Күн бұрын
I have been watching some of your videos, they are very helpful! Thank you for doing this! My newest project I’m trying to engrave glass beer steins… have you done this on the xtool p2? Do you have a video for that?
@inkberryinfusion3 күн бұрын
I was wondering what glues do you use to adhere acrylic together?
@MobileMrManiac3 күн бұрын
I got my first klaser just couple months ago... and everything I know is because if this guy and this channel. Thank you so much.
@ainttakenanyshit3 күн бұрын
What is your opinion on the B4 20 having enough power vs the B4 30 for ~ 700 bucks more?? Thanks for your thoughts....
@brendonkauffman49625 күн бұрын
thank you for the video! big help, it is much appreciated!
@vp17955 күн бұрын
how long do these signs last bhaiya
@annesorieux21676 күн бұрын
MERCI !!thank you so much for your vidéo .It helps me a lot
@vincentlekei19697 күн бұрын
Hay awesome video 😊 so question on cardstock can you use black sandpaper or black art paper too?
@jerodjerod7 күн бұрын
Good video. Thanks!
@shanehamilton38868 күн бұрын
Thankyou, very helpfull for a great gift for mom
@Soundofthesun8911 күн бұрын
I'm looking at getting a 1000w or 1500w laser removal machine to remove rust for car parts and other things. Is there one you would recommend?
@Labyrnthdom12 күн бұрын
It was good, Now I'm going to have to look and see if you have a better step by step video that can be follow along with. I'm subbed 😊
@daggerone743612 күн бұрын
Please help me. Im doing a stamp with an area of 26mm by 9mm. But the letters are not precise sometimes it looks melted. What settings should I use? Its a rubber pad and Im using algolaser diy kit 5w.
@sarvajeetkumar549213 күн бұрын
What's the price
@robertorcutt502916 күн бұрын
good info for the novice like me
@shanej242917 күн бұрын
Perhaps blk 3.0 or Vantablack would work well, the worlds blackest paint. Expensive way to do it.
@faileesoon402820 күн бұрын
Always can find the best answers for my laser engraving project!
@imranmashood250820 күн бұрын
Dear, i used sculpfun s30-10W to engrave triple glazed glass (6mm+1.52mm+6mm+16mm air space+13.5mm) glass. First try was ok, but 3 time glass cracked. Can you suggest the best way to engrave. Any contact to reach you.
@igormalusevic26 күн бұрын
and which settings should i do for 1.6W (1600mW) laser?
@ImJuanka28 күн бұрын
Calculator link is broken. Unlucky.
@Thracium29 күн бұрын
High quality research and Information sharing! Thanks
@Betty-zy2zqАй бұрын
Nice video! The Commarker B4 appears to offer promising capabilities, particularly for metal engraving enthusiasts. However, when considering laser options, it's worth exploring the Monport laser machine as well. Renowned for its reliability, precision, and versatility, Monport lasers are favored by professionals and hobbyists alike. With Monport, you can expect exceptional performance and quality results across a wide range of materials and applications, making it a valuable addition to any engraving toolkit.
@byronshepherd841529 күн бұрын
totally doesn't work for Monport
@richfox1255Ай бұрын
Super helpful video! Just assembled and started running my new Atezr L2 24W with roller rotary and Lightburn. Newbie question 1: Any advice on how to properly set the Origin (current position? user? absolute?) so I can avoid crashing into the rails. Second question: how does Home work when the rotary is in use? Thanks so much.
@lukeorgan9605Ай бұрын
What kind of line interval did you use?
@timsampson2941Ай бұрын
Do you know if this machine will mark numbers on nickel plating?
@TreetopsecretАй бұрын
Wow, thank you for all of the information. I appreciate the time you took to explain and show the process.
@JelledeАй бұрын
13:25 if u use the zink paint is it food safe after lastering ?
@MileyonDisneyАй бұрын
Thank you for the great info!
@miketony2069Ай бұрын
Very good comparison, thank you
@ManiBlacktiger7Ай бұрын
Thanks for this review! It was super helpful but could I get some suggestions? I ran my design using the following settings: Power :90 Speed :50 Lines per inch: 200 I have a lot of fine details and halftone accents that didn’t engrave through! What setting would you suggest for this? 😮
@ajrocker1353Ай бұрын
I was engraving with the power speed table from your other video to test my acrylic and there is a crack in every box, I'm using a comgrow z1 any idea why? Could it just be the acrylic I'm using?
@RobertFaumuinaАй бұрын
Very thorough mate. Thanks for the video. Have you tried cutting gold or silver mirror acrylic with the diode laser?
@jo.schott6071Ай бұрын
Hey there - got very good results following your instructions for Glass (Bottles and Jars) with a 10 W Diode Laser and Galvanising Compound. Thanks a million! However I fail engraving wine glasses the thin glass all cracks all the time. Do you have respective suggestions regarding speed and power for that kind of work?
@shanicemckoy8725Ай бұрын
Do you laser on the side with paint or on the other side ?
@gabrielsimons_artlifeАй бұрын
Thank you for the video this was the most concise explanation I have seen and I have watched a ton of videos.
@achillecalabria-nf6wgАй бұрын
your the only person that explained the setting perfectly thank you so much.
@sparksclinton4065Ай бұрын
i wish one of the lasers was UV laser ! nice details Sir
@geoesАй бұрын
Informative video...actually already I wasted my money buying Atomstack X20 pro... They didnt clearly mentioned that it can't cut transperant acrylic... From my experience only it came to know that. My other requirement was to stencil cut on 0.05mm thick steel sheet, which also they mentioned in their cutting list. Even that was also not happening. At low power its not cutting, and as power increases, the metal sheet is melting, shrinking, wrinkles, dark ashes etc happening. Honey comb bed was used beneath.
@igormalusevicАй бұрын
i have 1600mW or 1.6w laser Engraver, Creality CV_01 Pro 450nM laser. So which settings is for mine laser and i need power scale for this how to make it?
@my-pixelsАй бұрын
Great and informative video! Thank you! Could you please recommend a beginner inexpensive laser engraver for glass 🙏👍
@my-pixelsАй бұрын
Absolutely amazing and detailed video! Thank you for all the effort you put into it 👍
@digitalworldtv1Ай бұрын
Interesting indeed
@mathebys.akeret9097Ай бұрын
My last letter looks different... why could it be?
@Frankie2Times-jt3ws2 ай бұрын
Can you upload any image into the software??
@tiffanyfrance94312 ай бұрын
is there a way to engrave deeper so that the stamped image is cleaner?
@henkheijmans12252 ай бұрын
How to clean the laserlens?
@KRich4082 ай бұрын
You can actually engrave on glass without a coating, it's a process you need something black under the glass they won't ignite! It melt! Power and speed are very finicky from machine to machine I have done it and broke a lot of glass , um still trying to get the settings perfect. I'm using a Roly LaserMATIC 20w with it set to 10w . The way in this video is definitely better for beginners.
@JMAJOR-ki7ur2 ай бұрын
I have seen a video by James dean designs and had used a brasso metal cleaner to put a surface on the clear acrylic.