6 ай бұрын
10 ай бұрын
10 ай бұрын
10 ай бұрын
Пікірлер
@frankspinazzola4045 3 күн бұрын
Grumpy Jenkins Blew away some 426 Hemi's with the 327 back in the day, despite giving up 99 cubic inches RIP Grump.
@anthonyhollomm1172 18 күн бұрын
Running this setup in a 57 Chevy
@gumbyhunter 23 күн бұрын
whats the cam specs/comp ratio? sounds sweet, cams pushing it I can hear the low vacuum
@dpierson489 26 күн бұрын
Is it really a 62?? I don't see the breather tube in frount of the intake.
@eagleals5797 26 күн бұрын
Yes it's a 1962 the intake is from the 80s
@Tealmoney8571 29 күн бұрын
That's a beautiful 57 back there!
@paulboring9053 29 күн бұрын
It will blow
@user-yo3sz8xe2s 29 күн бұрын
That looks good but thats a lot on top for a 327. I know tunnel rams help. Thats a lot of cfm's for a 327. Probably would be better with a good dual plane single 4 barbell intake or a single plane single 4 barrel intake (if ya got expensive parts inside the engine) & a good 600 or 650 cfm carb. Put those tunnel rams on 427's & 454's & bigger...
@philbrady702 28 күн бұрын
That particular set-up on a 383 or 400 small block because it won't fit a big block (427 or 454 you referred to). OR, it could work on this set-up if the cam and heads can spin to 7,500 to 8,000 rpm. Being that it has a good compression and the lope we can all hear, maybe it would be good for a 20s or 30s hot rod? Just my thought, not saying you're wrong either, just speaking a thought
@geoffgunn9673 Ай бұрын
Nice setup. Ran a similar setup on a Holden 308 years ago with lots of success
@markreyes5425 Ай бұрын
Where are you located?
@eagleals5797 Ай бұрын
West Springfield MA 01089
@guysmith6910 Ай бұрын
How much
@eagleals5797 Ай бұрын
$8400
@marcdewey1242 Ай бұрын
A 327 chevy small block with Skynyrd playing in the background,how much more American can you get?
@terryfallert1371 Ай бұрын
Coool
@jefferyschirm4103 Ай бұрын
Why if it’s never going to be a weekly drag racer , would you ruin a beautiful 57 , why not spend that money and build it into a beautiful daily driver a/c and all , super tune too a 20 plus mpg , better than any new car you could ever buy ??
@user-hb8be5wb4q Ай бұрын
And still the speed-0-meter doesn’t work.
@annrhoads6808 Ай бұрын
Going to sell it to me right
@davekeller2798 Ай бұрын
Yeah, brings back memories when ai was behind the wheel of my 57 Chevy. Thanks for letting im my mind drive !
@williamlesh109 Ай бұрын
Be a better ride if the car was set up so it wouldn’t spin the tires.
@chrisnash5743 Ай бұрын
Just a little shot there eh???
@danieljones8173 Ай бұрын
Yep, it works !!!
@e.r.s.4177 Ай бұрын
You broke the speedo! Super nice ride 👍🏻
@levibarnhart7262 Ай бұрын
I have a late 64 went in 65 vette from the numbers say, 4sale
@Hoghaw Ай бұрын
Love that 327!
@bettybradley7060 Ай бұрын
I've ran a bunch of them they were ok but the new engines of today will run circles around them .for instance I own a 03 mustang has a 281 cid eng.it will bury a 150 mph speedo.i had a 69 mach1 it had a 428 cid eng .top speed of it was 142 mph .see what I'm saying if rather build a bad ass ls motor.or a 5.2 voodoo .I'm 68 years old and have owned about every muscle car made over 70 cars all the muscle cars were slow compared to these pocket rockets they have now.by the way that 327 can only handle about 700 cams .2 4 barrels is way over kill that's why he doesn't want to rev it it would flood out
@bettybradley7060 Ай бұрын
Cfm
@davecramer9725 Ай бұрын
You keep playing with them junk fords their buddy
@hectoracedo1569 Ай бұрын
Needs better exhaust little louder
@sydrider6023 Ай бұрын
The sound of a 60s Sting Ray.
@samrotheray5805 Ай бұрын
Awesome 👌
@richardsloane7983 Ай бұрын
Nice engine these comments make me laugh seems some people have to put in their 2 dumb cents in arm chair mechanics
@eagleals5797 Ай бұрын
Lol
@timbamler8964 Ай бұрын
Whow i built almost the same exact 327 about 25 years ago. I loved it.
@basedsigma5634 Ай бұрын
More show than go. Major overkill intake for 327 with those mickey mouse heads.
@danielackerman8693 Ай бұрын
😅
@pauljanssen7594 Ай бұрын
Pining the rocker arm studs will not work small journal crank I hope you use some good rod bolts and always trim that water pump gaskets much cleaner look.
@user-is3bp6ii4n Ай бұрын
Does it have the double hump heads? That used to be the thing back in the day!🤠👍
@rosskrause3926 Ай бұрын
462 casting # heads are Double Humpers. .had some on a 327 I built 30+ years ago..64cc chambers.
@RonaldLewis-py6yt Ай бұрын
Ole boy had this set up in a TBucket roadster back in the 90's I tuned it up and my mistake was taking a ride with him ,no seat belt nor roll cage he scared me! I've always been a Drag Racer knowing safety comes first,I'll never ride in one again, Also built a 427 or 430 for a jet boat I tuned it at the lake rhen grabbed my timing light and little red tool box and jumped out and said have fun I don't ride anymore! Nice Engine!!
@peterjordan6757 Ай бұрын
327 came out in 62 not 64
@eagleals5797 Ай бұрын
Chevrolet introduced the 327 cubic inch (5.4 liter) V8 engine in 1962. The 327 had a 4.00 inch bore and a 3.25 inch stroke, which were increases of an eighth and a quarter inch, respectively,
@user-vk8mq9wl5i Ай бұрын
327 don't have a harmonic balancer they were internally balanced!!!!
@eagleals5797 Ай бұрын
Every motor uses a harmonic balancer internal or external balance
@Papa-o33963 Ай бұрын
@@eagleals5797 Yes indeed
@user-vk8mq9wl5i Ай бұрын
I stand corrected
@kevinmchugh2302 Ай бұрын
Way over carved for that displacement.
@jimthomas1989 Ай бұрын
That engine sounds like it needs to go into my 66 Chevelle 😂
@randywachniak7023 Ай бұрын
Nice 327
@scotts7427 Ай бұрын
That sounds awesome Al!!👍
@bigblockkings1031 Ай бұрын
🤗🤗🤗🥰🥰🥰
@1992CapriceCapricemintconditio 2 ай бұрын
How much would you build me one for I have fuel injection
@johnevans1969 2 ай бұрын
Love the Purple People eater 💜
@dsabelfeldt7079 2 ай бұрын
Cam specs?
@eagleals5797 2 ай бұрын
Comp cam 12-600-4
@dsabelfeldt7079 2 ай бұрын
Whats the compression on it? Also, would that cam work in a 1990 305 carbureted non-roller block?
@Adamdub612 2 ай бұрын
how much brother?
@seantorrance5414 3 ай бұрын
What was your initial timing set at?
@eagleals5797 3 ай бұрын
20
@DennisAllen-oy7gi 3 ай бұрын
Nice building one myself 097 cam doublehump heads I know it will be nice. Going in 57 vette that I have Owned since 1981.
@eagleals5797 3 ай бұрын
Very nice send me a picture
@user-ev4pb9xj7e 3 ай бұрын
This is old school, I had all this back in the ‘70’s. Brings back a lot of good memories.
@seetheforest 3 ай бұрын
Nice dent in the back left header tube. 😮
@jamesgeorge4874 3 ай бұрын
As accurate as guessing !
@scotts7427 4 ай бұрын
Great video Al, i’m pretty partial to the little 327s, that thing looks great, sounds awesome thanks for sharing Al keep up the good work👍
@mikeedwards2684 4 ай бұрын
Wow that is a sweet garage setup ! Love it