Big Brown Bear

Пікірлер

@me2bfc 19 сағат бұрын

How often does a saw like this need to be sharpened? Would it make a couple more cuts like that or need a sharpening after just that cut?

@johnlocke_1 Күн бұрын

I'm not a fan of Dan Keffler.

@is9582 3 күн бұрын

Truly enjoyed the video, even though I winced a bit as you were killing the knife’s edge on the belt sander. Lol I know I’m late to this vid, but might you share what sharpening stone and grit you are using? I saw the company name on the stone’s base, and with some searches, it seems like the Gokumyo , possibly a 15K? Just basing off of coloration that seems to match an ad. Thanks again in advance. Lee

@UFOSPACEMAN 4 күн бұрын

Blah

@dengised321 4 күн бұрын

How can I contact you about sharpening my Maxamet Para 3?

@EdenPrairie_OldsGuy 6 күн бұрын

Big Brown Bear, you're a good man, and thorough.

@Optimization_Coach 7 күн бұрын

This is old, but my Smooth G10 grips are so damn slick. It's a user knife and in the SW Florida Heat and Humidity this is constantly slipping on me. Have to look for better options.

@bigbluemsp 9 күн бұрын

Takes a wicked edge but chips so easily

@gway9226 13 күн бұрын

Got my custom made tracker in aeb-L

@spiritbender639 14 күн бұрын

When sharpening blades where the edge comes right to the heel/ricasso, how do you keep it so even all the way to that heel? For example the Manix 2 in the video or especially the PM2. I can get very flat bevels when canting the blade at about 45 degrees to the stone, but when that heel juts out, to get all the way back, you have to hole the blade at 90* to the stone. Is this just something that comes with hundred of hours of practice or do you have any tips for this? Thanks!

@gway9226 15 күн бұрын

Could you tell me what advantages if any rex45 has on k390 or 10v

@gway9226 17 күн бұрын

I'd love to see you And larrin talk about rex 45. Different thoughts it seems

@LovesM855A1 18 күн бұрын

I need your services what do you charge and how can I get your sharpening?

@LovesM855A1 18 күн бұрын

Sharpening is a art and you Sir are painting mona lisas!!

@LovesM855A1 18 күн бұрын

Sharpening is a art and you Sir are painting mona lisas!!

@hanswolfe5995 19 күн бұрын

That's a beautiful knife Son

@eYeSoN3691 20 күн бұрын

I’m sure you are just fine paying your bills! Relax.

@matthewkuhl79 22 күн бұрын

i feel Kurt Russell Wyatt Earp is more of a CruWear or 3V than a stainless steel.

@robbabcock_ 23 күн бұрын

Are you still able to get stuff from Ken Schwartz? I haven't been able to reach him in a while.

@FearNoSteel 23 күн бұрын

Ken is deceased. He died a couple years ago.

@dustinwhitt5297 24 күн бұрын

I got a lil temperance in k390 and was wondering if I force patina it if it would patina evenly across the blade?

@dustinwhitt5297 24 күн бұрын

As a side note I would LOVE one of those custom fixed blades with two different micartas almost like it has green handle with a black bolster. Do you still do customs?

@ryumac 25 күн бұрын

Not supposed to spin.

@matthewkuhl79 28 күн бұрын

Wow, i really need to improve my freehanding

28 күн бұрын

What is the grit on your diamond stone ? Thanks for an awesome video.

@harrisquicksilver6595 29 күн бұрын

Is that manilla or twisted cicile??

@maidoni3775 Ай бұрын

👍

@Ratchman_5000 Ай бұрын

Trying to sharpen that exact same blade.. what a son of an onion it is!!

@DaryooshF.Sh.P-vq6mu Ай бұрын

Just done with sharpening it to mirror polish using Naniwa 400, 1000, 2000, 3000, 5000, 10000, 12000 finishing on leather strop. It took me 2 hours and still I can see no use for this nonsense piece of dull by design garbage after 5 or 6 years. My most regretful knife purchase ever.

@SupraDeluxx-ro1qg Ай бұрын

imma take your advice and next spyderco i look at will be in k390

@danathomas6444 Ай бұрын

This is good meditation for me thx

@danathomas6444 Ай бұрын

You got skills 🤩

@danathomas6444 Ай бұрын

Hi 👋 please call your Mom and Sister Shawn.

@SnoPro440 Ай бұрын

I’ve done 100s of tests micro bevels is the only way to go Im lucky to have a friend with the right equipment to test with we measured the pressure it takes to cut through multiple items with micro and without the micro bevel & what we found is the micro bevel takes 25% less pressure to cut through all the things we cut and kept the edge twice as long

@intensecutn 21 күн бұрын

I'm far from a master at sharpening, or knives for that matter, but I bought a opinel #7, and the micro bevel is razor sharp. Like scary sharp.

@christopherlaborde1670 Ай бұрын

What angle do you recommend sharpening a Magnacut 62HRC at for a sharp but durable edge?

@FearNoSteel Ай бұрын

Angles aren't fixed to steel. They are fixed to you and how you use the knife

@scottvines4093 Ай бұрын

@@FearNoSteel Good point. Just go out and do the sort of things you want to do with your knife. Take your philosophy of use, see if it meets your expectations and adjust accordingly.

@hirumbiffidum9145 Ай бұрын

0:09 what do ya hunt for, elephants ?

@MB-jg4tr Ай бұрын

I just got one of these and wow. And these are now selling for $30 USD‼️ New Old Stock. Its a mostly forgotten about model, with lightweight quality materials. It's a Endura killer IMO. Super win for those who know.

@Laszlo-Szabo Ай бұрын

Let him cook!!! 😎

@veteranentrepreneur8429 Ай бұрын

Horrible technique flaging every shot😂

@candyshop84106 Ай бұрын

DR. THOMAS OS THE BEST!! Period...

@chawenhalo0089 Ай бұрын

These guns look like toys handled by a bear!

@shane4176 Ай бұрын

Men built like mountains dont need guns.

@FearNoSteel Ай бұрын

Love ya Shane

@shane4176 Ай бұрын

You too brother!!

@housevollmer9106 Ай бұрын

Does shooting the G48 feel the same or different than shooting a G19 and does the 5th gen in general feel better to you with no finger grooves?? I think 5th gen is sick, I was just waiting for them to work the kinks out of the G20 in 10mm which they released earlier this year... good shootin bro!!

@FearNoSteel Ай бұрын

G19 will shoot significantly better, not a fan of the finger grooves but I wouldn't notice either way when shooting. Not a fan of 10mm; too much cost, recoil with minimal return on investment besides cool factor. I'd rather use a rifle if I want better terminal ballistics.

@alfredvenegas972 Ай бұрын

What kind of waterstone are you using Brand

@PinkMist88 Ай бұрын

Very cool!

@W5rr2nG Ай бұрын

P R O T E C T

@vindice5849 Ай бұрын

Id also kill for a native 5 in this configuration

@vindice5849 Ай бұрын

I offered to send my pm2 (factory second) to outpost76 so he can check it out and run his testing i cannot wait to see what he thinks, its an absolute beast of a steel

@vindice5849 Ай бұрын

What pistol is that? I love my 507k got a great deal on mine but do wish it was green

@FearNoSteel Ай бұрын

It's a Glock 48 MOS. I agree on the 507K 😁

@davidmakarenko9740 Ай бұрын

Holosun??? how is it holding up??

@FearNoSteel Ай бұрын

Holosun 507K. I enjoy it, I think the Holosun EPS would be better but it's more $$$ ya know?

@davidmakarenko9740 Ай бұрын

@@FearNoSteel yeah, $$$ management is quite important in our current times

@FearNoSteel Ай бұрын

@@davidmakarenko9740 Amen

Ең жақсы KZfaq

Пікірлер