Except it doesnt... maybe thats why that engine is blown lol

So cool i really want one but I can’t buy it yet😢

I got mine going 78

As a mechanic I would hate to say it but it sounds like you substituted the seafoam for the missing 3/4 of a quart of oil

As far as the crank case goes seafoam to clean and prolube for all the other stuff.

and help moto slug from oil to pan to drain

will take slug out of oil pan when drain

Hi! Where you buy the rear shocks mount?

Is that a misfire??

Sea foam works well to displace water in fuel tank.

Brand new

Yeahhh I made the mistake of leaving the bolts and nuts from the package cage around trying to figure out where they went on the scooter...lol...not a fun time

The sludge, varnish, buildup, whatever, by the oil filler/cap area, is a telltale sign of what that engine’s been through… You definitely might wanna “flush” it yourself, by draining and filling twice; maybe even using “motor oil flush” formulas, if you’re certain you don’t have a leak. Those are the only circumstances I’d recommend using an engine “flush” formula under. Some engines are just naturally loud when cold starting. Running a thinner oil with the cold weight reduced, can really really help; but decreasing in increments of like -5W at most (ex: 5w-30 to 0w-30). I wouldn’t bother running thicker oil if you increase the cold weight, bc it would just stress the engine during startup, and during the warmup phase. Full synthetic motor oil is highly recommended, and semi-synthetic is like even more readily available than TRYING to find a conventional motor oil, nowadays… If you want, you could use stuff like oil stabilizer; but like I said, it’s more of a band-aid, although probably less damaging than trying to run thicker motor oil.

An old timer once told me put one in the pink and two in the stink. Back when gas used to be pink. Wait what are we talking about again?

16 oz. of dexron 6 ATF 1-200 miles before every other oil change 👍🏽

lol engine just warmed up only way seafoam would do that is if it didn't have enough oil. Seaform is for cleaning out combustion chamber and well oil shouldn't really be in the combustion chamber unless the valve seals and piston rings are worn.

What is the name of those tires?

No kia's suck

Sea foam actually works well

Too many cuts in the video to be believable

Cut to a different engine

I think seafoam cleaned so well the sludge..lubricated everything but contaminated everything with sludge

The noise is coming from it not having a cap on. As I was watching this I was hoping this person wouldn’t try and play it off as if the product had worked so well when it was the oil cap the entire time. 🤦🏻‍♂️

Fliechender Uwe: "abends will ich dann nur noch absaften"

Eso está mal!!, es 1oz por cada 4to de aceite si te pasas de cantidad degradas demasiado el aceite y puedes dañar el motor, 5oz x 5cuartos y se conduce unas 200 millas y se hace otro cambio de aceite nuevo....

this is what happens when you don't change your oil!! I know people who take years to change them because they are stingy and supposedly. change oil every 10000km and you will never get anything wrong. and of course

I’ve seen the good, the bad , and the ugly reviews on this stuff. lol. Project farm on you tube does a great review of engine cleaners. The one thing about all these products is that with regular use you usually won’t notice a difference. However if your engine is having problems you will notice a difference.

Suppose to go in the fuel tank

U got another one what color is your fav

According to lab test,dynamometer test and Lake Speed you just shortened the life of that engine. After market additives like cocaine/herion/LSD feel good at the time but end results QUESTIONABLE!?!?!?

How is the quality on these bikes after a few months to a year?

Min e has a plug of some kind in the seat compartment. Where does it go

Wow, thanks a lot

what side does each spacer go on?

Honestly, I cannot hear a word you're saying in this video

Need to change your oil more often

when installing the front axel...no grease needed on the shaft or bearing?

Went from total ish to ish

Tried Seafoam on my truck, followed the directions, even did some research before using and now my truck smokes all the time (yes, I rev my engine at 3,000rpm for 10 minutes) and it smoked like crazy like Seafoam is supposed to do, but now my truck constantly smokes and making a knocking noise, and I always changed the full synthetic oil every 3,000 miles along with premium filter

Changing the badge of manufacture would help a whole lot better

Never use that shit

You better go get yourself some topnof the line engine flush and take that cover off the top of the engine and CLEAN THAT SHIT. If its knocking like this chances are your engine isngoing ro blow from all the sludge buld up. Hopefully it saves it. IF do what i just said. Also change the oil. Then after 800 miles change that oil again. If you make it to thet point you should be in the clear. Regular maintenance is needed just like anything in this world. Especially a bunch of metal grinding and clicking together on MASSIVE scale, under MASSIVE PRESSURE. Please that. 🙏

I’m sure simply putting the oil cap back on probably solved the entire issue.

Hey man, do you still have this? How is it? Any issues so far?

That oil cap gonna fall and land on top of the frame and you ain’t never gonna find it.

Sounds like a Model T

I used a regular oil cleaner in the oil in a 13 year old car. The vibration stopped, the engine ran better, but I lost compression. This was on a car that used mineral oil. Change the oil after “cleaning “ the motor.

The can of Seafoam cost more than the car.

It’s rigged to blow now your oil pumps gonna be full of carbon

How good is it