Anyone else getting that feedback in the Audio track that I get? If so I'll try to correct in editing again and re-post.
@sarahbezold200823 сағат бұрын
yeah I do, in pretty much every video. aside from that these are all great though
@everymans40k22 сағат бұрын
@@sarahbezold2008 Thank you for the input... Ok let me see if I can correct it. Also I'm tired of this old MIC, I'm going to order a different one.
@jordanstein51018 күн бұрын
Best waagh short
@jordanstein51018 күн бұрын
Loving it. Keep them coming
@dragunhero0028 күн бұрын
Beautiful 😢
@AmazingAceАй бұрын
this thing is looking freaking amazing
@everymans40kАй бұрын
Ty Sir. Yeah couple more weeks and it'll be in primer!!
@ChaseDaOrk3767Ай бұрын
I'd like to get myself the Gorkanaut/Morkanaut set someday
@everymans40kАй бұрын
Yeah...I think every Ork player should have at least 1. Not to always stuff in a list, but you have to have one just for fun factor!!! No "True" Ork Warboss should be without one available to do some Krumpin!!!
@ChaseDaOrk3767Ай бұрын
@@everymans40k Fair enough, hopefully once I get some money I'll see about getting one
@samuraijaco12 ай бұрын
About how wide would you recommend drilling the hole for that chest piece to fit into?
@everymans40k2 ай бұрын
If possible, I'd go 5/8" to start. Then from there work outwards... If you have a dremel type tool it makes easy work of it. If not 5/8 is the most manageable. Bigger than that it becomes tough to hold model and drill in order to have control. The hole ends up. Being almost 3/4" to 7/8" when done. Lastly always drill and grind then test fit...then drill and grind test fit...rinse repeat. Stops you from making trash.
@TCurry-lf4bd2 ай бұрын
Can you buy these somewhere already printed?
@everymans40k2 ай бұрын
I don't think so. I don't think that printedwargames.com has a buy as printed feature. I think you have to have a printer...
@TCurry-lf4bd2 ай бұрын
Well they could make some cash I would love to have those figures
@campslappy81043 ай бұрын
are these to scale with Goby? I'd like to use Goby arms with their weapons.
@everymans40k3 ай бұрын
Yes these are to scale...very close...I mean within 5%. I have both and if you do a side by side...they're almost exact.
@ulicqel-droma68843 ай бұрын
Hey man, I know you like piper makes. Are going to be doing of void craft?
@everymans40k3 ай бұрын
I won't do those until I get my Tau done...so quite a ways off. Also I don't play Eldar so not sure if I will ever start them. But they are amazing, if I played Eldar...I'd be doing PiperMakes for sure!!!
@paille-boy3 ай бұрын
OI DAS A VERY SOLID WERK!
@ChaseDaOrk37673 ай бұрын
Nice! Also if I may ask, what are some military vehicle model kits do you think would work well as Ork Trukk proxies?
@everymans40k3 ай бұрын
Yes...look for German 1/2 Tracks...could be very cool for kit bashing. Also some of the 6 Wheel american 5 Ton. Italian trucks...soft cover...very cool
@ChaseDaOrk37673 ай бұрын
@@everymans40k I'll certainly look into those, where might I be able to get them at? If I may ask
@dakkaflakkaflame3 ай бұрын
WAAAAGH!!!
@Smaug2333 ай бұрын
This is so cool
@everymans40k3 ай бұрын
Thanks dude!!!
@ParkerGTrainor3 ай бұрын
where did you get the 3d models??????
@everymans40k3 ай бұрын
Sorry I forgot to add the link to the Vespid. I have now added the link. Thanks for heads up printedwargames.com/partner/pipermakes/ has all PiperMakes files
@campslappy81042 ай бұрын
Do you do your own printing? Can you print for me?
@everymans40k2 ай бұрын
@@campslappy8104 no sorry I only print for myself. I try to honor the developers IP Rights so that I have no conflicts... Just personal use is all I do. Everyman
@farid63124 ай бұрын
Круто ждем продолжения. я слежу за твоим творчеством.
@chesteratienza51754 ай бұрын
🤔 I was thinking of getting him but will probably stick to the short sword.
@everymans40k4 ай бұрын
I've actually already changed my Farsight configuration. Mine looks way better now than even this one... You guys will see it when i start to put the Display Board together
@chesteratienza51754 ай бұрын
What are your thoughts on the light goby skimmer? I think they are tetra proxies as well? I forgot the actual name in pipermakes but they are 2 little bots on top of a terra like vehicle.
@chesteratienza51754 ай бұрын
i see you prefer the koi over the mako, nice! ive been thinking which variant to get. question: are these bigger than the actual crisis suits from gw or it is mostly the same size.
@everymans40k4 ай бұрын
Yes...I printed these at 85%. They are bigger than GW's Crisis suits. Normally and at 85% it puts them right about perfect. You could go 90% for a slightly bigger version. At 100% or 1 for 1...no way. My opinion...but I have a friend who plays Tau and I've done the in person "in my hands comparison"... I prefer the MAKO to be used in the construction of the GW R'Varna and Y'Vahra. Those used this way can be printed at 100% or 1 for 1.
@chesteratienza51754 ай бұрын
now that i think about it, ghost shrimp slaps harder than silverfish
@everymans40k4 ай бұрын
For sure 100%
@chesteratienza51754 ай бұрын
They look nice, thank goodness I have stumbled upon ur channel, ill binge watch
@everymans40k4 ай бұрын
Ty, I got a ton of stuff in there to watch so take your time. Don't burn out...lol
@chesteratienza51754 ай бұрын
By the way, do they fit in 25mm bases for the breacher team?
@everymans40k4 ай бұрын
@@chesteratienza5175 Yes they fit but you just have to watch what stance you use. If you choose to use the wider kneeling stances or open leg type stances then it gets tight. I recommend manipulating your bases a little just to expand the footing...like you know how some people put CORK on top of the base. You can add 1 MM here and there doing this but still keep the natural base form.
@chesteratienza51754 ай бұрын
thank you so much! I know they're quite taller compared from gw, that won't be an issue right? Also your thoughts on corydora types since there is the new hunting pack detachment?
@everymans40k4 ай бұрын
@@chesteratienza5175 I'm using Corydora for my Kroot proxies. So I like them.
@TheAwesomeGuy8714 ай бұрын
Another fantastic video showcasing Piper's models. Keep em coming!
@everymans40k4 ай бұрын
Ty. Time to start painting now.
@triplea657aaa3 ай бұрын
@@everymans40k I can't wait to see that :D I'm still considering paint jobs for mine.
@ssjthunderer50515 ай бұрын
WAAAGH!!!
@en4cer5 ай бұрын
I used a different models from her for my crisis suits think it was the fishmech. And then used archerfish for my broadsides...... This model I plan to use for my coldstar commander
@everymans40k5 ай бұрын
Yes you are correct, they used to be called Fishmech. But since then Piper has updated the file and now calls them Koi Mech...so yes you are correct. She has updated a ton since 2020.
@TheAwesomeGuy8715 ай бұрын
This print looks great! Ive just gotten my STLs for this model all sliced up and ready for printing. I haven't seen anyone else post a video or pictures of the completed transport. Well done!
@everymans40k5 ай бұрын
Thank you!!! Yeah it sort of seems like folks doing PiperMakes prints, don't really share that much. Sort of an underground thing I guess... Love this model as a transport!!
@TheAwesomeGuy8715 ай бұрын
@@everymans40k Well I'm really glad to see someone making some wonderful prints of Piper's amazing models. I've only done the TEOTH frame and ghost shrimp so it's really cool seeing what some of the other models look like once they've been printed and what the assembly processes are like!
@XxWizxW5 ай бұрын
It hurts that you are embracing tau.. Great video. But less commi fish and more waaaagh!
@everymans40k5 ай бұрын
Hahahahahah OMG...I LOVE IT!!! and who says Orks won't be in this project??? I can't show all my cards!
@neinhartxd39205 ай бұрын
Awesome 🎉👍👍👍
@spmprimaris96875 ай бұрын
👍joli travail
@neinhartxd39205 ай бұрын
Awesome Video, pipermakes stuff is insane she should be the standard designer for Tau battlesuits. Like to see more of your content🎉👍👍👍
@everymans40k5 ай бұрын
Yeah...I saw her stuff and just had to make an army out of her "Mecha". She is now producing some other wicked looking faction...but my printer can only handle so much!!! Cheers!
@KeithMel15 ай бұрын
Wow
@everymans40k5 ай бұрын
Pretty intense right...lol
@pivotmaster43946 ай бұрын
this thing is a khorne abomination fitting for the chaos. love this thing it looks so cool and i cant wait!
@everymans40k6 ай бұрын
Yeah...I am pretty stoked. I am hoping to do it justice...I'm actually angling this toward single "large" model painting competitions...like Golden Daemon type stuff. I have ideas in my head that I'm not sharing until it's time. But yeah this is going to be crazy...
@pivotmaster43946 ай бұрын
Looks absolutely amazing so far, something that might be cool is instead of a visor that normal knight have, maybe a magnetized skull would be neat.@@everymans40k
@everymans40k6 ай бұрын
@@pivotmaster4394 Fantastic idea. I think am leaning toward something a little bit different. This model is large enough for some sculpting/greenstuff work on his head. So I'm going to take 1/2 his head and make it mechanized. Think Ork skull like Ghazghkull Thraka!!! Just wait going to be amazing!!! I hope...
@jordanstein5106 ай бұрын
Hobby grandmaster
@everymans40k6 ай бұрын
Thanks Jordan!!!
@maxmuller4456 ай бұрын
Honestly, that's a way cooler model then GWs
@everymans40k6 ай бұрын
Yeah I agree...love the lower troop carrier section. Reminds me of Starship Troopers
@Firehoundex6 ай бұрын
This is a great explanation of your thought process! One day I'll make my own but your info is surely valuable! Ima steal that "pin" idea, instead of gluing them to a base. Being able to remove them from the base to make changes sounds amazing!
@Firehoundex6 ай бұрын
That is going to look amazing! I can't wait!!! Are you 3D printing anything for this bash? Because this seems like quite an endeavor!
@everymans40k6 ай бұрын
Yes...I'm 3D printing all the file sets from "Lord Of The Print" INFERNUS DRAGON. Google him...amazing stuff that group does. Then I'm combining an Abominant kit I had laying around the house that I never put together... So I'm doing it all on this one!!!
@jazzj26 ай бұрын
I printed one of these when it was released, could not for the life of me get the box-holding-tentacle things to align and one of them ended up breaking as i was trying to get them to fit.
@everymans40k6 ай бұрын
Sorry to hear about your troubles. In my prints using Phrozen Mini 8ks...mine lined up perfectly. On mine I even was able to pin and separate them. The whole thing comes apart. Just FYI...the BIG Center Fan on the fuselage that mates up to the lower gear on the Troop Carrier. They have to be aligned and set 1 way otherwise you are correct...the geometry of the "release latches" will never line up. I would check that 1st. The lower Gear unit that glues to the troop carrier is slanted or angled. If you look at it from the side...it has a HIGH SIDE (rear) and a LOW SIDE (front). Hope this helps guide you to a fix...but mine was perfect. Everyman
@Barry-Sweaty7 ай бұрын
Holy moly!!! That paint job is amazing. I’m chubbin up over here. Omg.
@everymans40k7 ай бұрын
Hahahahahah sooo funny!!! Easy does it tiger!!!
@Firehoundex9 ай бұрын
FOR THE GREATER GOOD
@Firehoundex9 ай бұрын
I love your list! I always have a special place in my heart for those broadsides! Those Riptides are just too good
@everymans40k9 ай бұрын
Thanks... I think it has a great balance for all takers sort of match. Just a general tourny list. I didn't go with 2 bigs bricks of Crisis Suits. I tried to go more themed. You'll notice there are no Kroot of any kind. I wanted to stay all MECHA, sort of like The Matrix movie or Terminator. All robots...
@djigsup9 ай бұрын
Here we GO lads!
@everymans40k9 ай бұрын
Yeah I'm pretty excited...hope everyone else is. Going to be a long detailed project...but the display board is going to be sick. Got some new tricks up my sleeve for this next one...
@joshuareyna86919 ай бұрын
Nice
@everymans40k9 ай бұрын
Hahahahahah...very cool. Ty
@ishmaelbarr15810 ай бұрын
Greate job !!!
@everymans40k10 ай бұрын
Thanks...fun to put on the table!!!!
@billiondollarclownfarm11 ай бұрын
these are extremely cute love them
@everymans40k11 ай бұрын
Very cool man. My color choices are kind of funky... Great to meet you at PSO and to check out your truly "Top Shelf" ork army!! 1 of a kind man! Thanks for coming by and checking out some of my creations!!! I've been a fan of yours for quite some time...your Kustom Stompa video is just nutz!!! Cheers Everyman
@Goofy_matman Жыл бұрын
Had to subscribe after this conversation absolutely beautiful
@everymans40k Жыл бұрын
Welcome aboard and thanks for the comments. We are in a little bit of a slow time right now due to 40K 10th Edition coming out. But we should get back to it shortly. I just put together my 1st Ork list for tournaments yesterday. So i have some work to do!!! Everyman
@jordanstein510 Жыл бұрын
You are the wind beneath my wings buddy. Avator centerpiece worthy of leading my knife ears to victory. Can't wait to get him on the board. Bravo bravo bravo
@everymans40k Жыл бұрын
Yeah easy money...hit me up on Discord and lets arrange the delivery. Looks way better in person, my cellphone and choice of lighting washes out the colors in the video. But the colors are amazing in person!!!! WOW!!!!
@Smoke11o3 Жыл бұрын
Damn, and here I was just thinking on how unique it would be converting Zodgrod into a Beastboss on Squigosaur...and it definitely is! Just found your KZfaq channel and it's just full of amazing conversions and kitbashes, thank you for sharing your awesome work!
@everymans40k Жыл бұрын
Ty for the nice comments. Super glad you like the channel. I tried to create a channel where people can learn or at least see some of the techniques and general materials you can use to bash minis together... I have more stuff on the way...just slowing down a little bit so I can balance life and the hobby so I don't burn out. Everyman
@sarrakitty Жыл бұрын
I've been playing Kill Team and not worrying about 10th tbh. You ever tried that game? I find the alternating activation skirmish battles to be pretty fun. There's a whole Kommando team for it. Might be a fun opportunity to make some unique kitbashes for the Kommandos. As far as the stompa goes, can't wait to see it be built! I love scratch built models, there's something so creative about them. The Tau army is also exciting, Can't wait to see how these prints look!
@blairbrook1336 Жыл бұрын
I have my old gaz model that I have to do the same to 😢
@sarrakitty Жыл бұрын
Woahhh. That thing's an entire show built in with the lights, sound, and effects. Did not expect the blacklight effect!
@everymans40k Жыл бұрын
Yeah....wooohoooo. I'm going to start work on another one too. Starting in about 1 month...I'm trying to gather up the minis now. Got another show planned...but different!!! Thanks for the nice comments...let's see if folks start to copy what I've done... Everyman
@dragunhero00 Жыл бұрын
Epic. What an amazing job
@everymans40k Жыл бұрын
Yeah...thank you...wait till you see the next one I'm working on!!! Thanks for the great comments...