It was a pity that the 3D print job looks so rough.
@WutTheWutThe4 күн бұрын
It is insane how cheap these TVs are getting. I paid $4500 for a 55" Panasonic Plasma (1080p) back in 2011. The 65" UHD 4K Roku TV in this video was $289 at Walmart online today. That's just insane!
@closedaccount54913 күн бұрын
Thank you for your complete video. I just bought the same Certina ds-1 day date (silver and blue colours, I love it). I also experienced that the crown is very hard to turn, this is not normal compared with all other watches! I gave the watch back in guarantee to repair. My question: did you try to open the watch?? Is it possible to place again the back cover just pressing in the hand?? I am a bit scared that I open the watch to regulate, and then I am not able to close it again without special tools! Anyway I like Certina watches very much.
@_BangDroid_14 күн бұрын
I'm sure you could CHORD buttons if programmed in QMK, but it's such a deep rabbit whole and time investment
@brienzee9 күн бұрын
i havent tried either qmk or via with my adept yet, but i'd think should be pretty straight forward
@Aomori_115 күн бұрын
Ploopy
@mattnelson431719 күн бұрын
I think the reason you don't seem to get anywhere at first with your stones was the factory edges are convexed, so it takes a bit to actually flatten down to a standard edge bevel. That combined with a hard steel makes for a more time consuming first sharpen. That and going down to 12 DPS lol, bet that thing just eats now!
@pscot468Ай бұрын
I'm jealous 😭 I've always wanted one of those.
@rrschАй бұрын
Thanks for the video! I bought a set of the silicon nitride bearings for my Expert Mouse Wireless. That alone made a significant difference. A dab of silicon oil on each one and it's even smoother now. Almost no resistance with the trackball, this made a massive difference.
@jamesmason7124Ай бұрын
Thank you sir for this video, you really should have more subscriptions, you deserve it
@apocalypsing7412Ай бұрын
For TCP connection tuning in Windows, you actually want to keep the auto-tuning setting set to "normal", so it's no surprise to me that you actually dropped your speeds in speed tests by 600 Mbps, as you're saying at around 11:45. The real killer in Windows that tends to wreak havoc with TCP connection speeds is the TCP scaling heuristics option. Given my own past issues with TCP scaling heuristics in Windows,I always disable it nowadays, using SpeedGuide's TCP Optimizer utility. As for slower speeds in Firefox,that's also a known issue affecting some people as Firefox uses some really sub-optimal defaults, much like Windows. Fortunately there are some about:config tunables for Firefox that bump up the maximum allowed connections, which you could also try tweaking to get Firefox more on par with Edge or Chrome.
@BondarSamАй бұрын
why in Russia that houses is luxury... i love that places
@preamble466Ай бұрын
I just bought one of these trackballs and plugged it in this morning and noticed an occasional stickiness immediately. Other than that it operates pretty nice. I will say that the button click is driving me insane so I will either try to insert a piece of foam under the buttons, or possible add touch sensitive buttons. After using touchpads for 15 years, there are some major disadvantages to a trackball on a Mac (switching spaces, zooming, touch-clicking). I have both side by side on my desk and will probably use both.
@florichi2 ай бұрын
Man, i love living in Austria. Our ISPs upgrade to network standards other countries have since 5 years. Some ISPs still use DOCSIS 3.0 and don't want to upgrade to 3.1. 99% of the FTTH stuff (which is only 4% of households in the country) will only build out normal GPON. We have a ISP as a customer that does max 80mbit/s over his fiber network. But now comes the question: What are you gonna use those 2.5gigs for? When I get fiber in my home next year I will book the 500 or 700Mbit plan for 50 or 60 bucks and that for me is hella expensive and the max I will want for the next 10 years. Other than downloading games and patches on Steam I don't know what I would need it for.
@chrisvoss27192 ай бұрын
I have had 2 of these. It is a good screwdriver, but the PH2 head is trash. It chips and rounds off. If this bit is impact rated it is trash and so is Klein’s interpretation of the rating for these bits. Contaced them about replacing bits and was informed that the bits in the 32500HD are not sold or available except on the original purchase of this screwdriver. It’s a shame because I loved this screwdriver but I will not buy again and will not be screwed by this product again.
@iamnobodyy_2 ай бұрын
question so at&t fiber is coming to my neighborhood definitely gonna have it by the end of the summer i have a friends house i go over and play fortnite on he has fiber with at&t but has 1kmbps when i get it i want to get 2kmbps do you think it will make my ping any better from 1mbps i have a 2.5 mbps port in my pc as well thanks in advance
@wavyy94252 ай бұрын
what is kmbps? are u talkin about 1gig? and going from 1gig to 2gig barely going to make difference cuz ur gonna already be on 0 ping
@Status-xq6tp2 ай бұрын
I'm not familiar with kmbps but 1k upload and download from fiber connection usually will provide very low ping ranging from 0-3, and if not i would consider upgrading your router in order to stabilize your connection and ping. I would personally only recommend the upgrade to 2500mbs if you have lots of devices in your home that are bandwidth needy or if you're simply downloading a lot of things frequently and would like to see them install faster. If your priority is simply just gaming, then your upload speed is what matters in that context as upload speeds will benefit more consistent bullet registration & movement. In most cases 1k, 1k is enough.
@YiHogyunАй бұрын
as you can see from my channel, I have over 25 security cams up and running 24/7 on an NVR along with multiple computers up and running. But for all that, I'd say I definitely notice the 2.5gbps up/down difference over my previous ~10 years of 1gbps up/down internet. Uploads, downloads/throughput speeds, streaming reliability and consistency, internet's overall consistency and function. The differences are in multiple ways both measurable and subjective, but I would never go back to 1gbps internet. When I was on my daughter's 1/1 gigabit internet at her college (hard-wired) a couple weeks ago during graduation, I noticed how laggy the gigabit internet was right away.
@iamnobodyy_Ай бұрын
@@YiHogyunwow thank you and everyone else for your replies and yes i meant gig plans im getting the 2 gig plan and will be getting anywhere from 2,000 up and down to about 2,500 up and down im so excited getting it this monday around 12-2 pm est thank you again for all your replies i will let you guys know how it goes
@deepspacecow2644Ай бұрын
Speed and latency aren't really related unless your internet is slow enough where its gets backed up and drops packets. It really depends on ATT's routing to the servers from the game company.
@ig0lka2 ай бұрын
сидит чето ковырет там... видео о чом блин?
@CKshouta2 ай бұрын
> 24 degrees inclusive Good on ya brother, getting the knife to cut so much better than they come from the factory
@korean100003 ай бұрын
헉 산호세 사시나요???
@YiHogyun3 ай бұрын
저는 반대편 해안에 살아요
@janbeckerman37973 ай бұрын
I replaced the 3 bearings from my Kensington expert mouse with the bearings you recommended and I also put 1 drop of pure silicon oil on each bearing. Works better than when it was new. Thanks so much.
@DeluxRobIox3 ай бұрын
can it bluetooth pair to an ipad?
@davidriosg4 ай бұрын
Thanks for the video. I bought my wired slimblade new some 2 years ago, and now the stickiness when starting the roll is so frustrating it's almost impossible to work with it. I'll try to replace the bearings like you did and hopefully that fixes it. Cheers
@pcat58164 ай бұрын
I have a similar setup and also live in plano. I had a few return and replace issues. I think they’re under control now.
@fredyramosfonseca24264 ай бұрын
Thank you for your time, Great video sir. One question. Is necessary change the disk to the ssd for the 16 gb ram. I have 4 gb ram actually so... I could change the ram only? how will my pc respond. thank you sir n sorry about my english. Espcs. Intel(R) Core(TM) i3-4130T CPU @ 2.90GHz 2.90 GHz
@TILLYSWorldVLog4 ай бұрын
Do not put two 8gb RAM into it as you’ve seen in this video😮! It cause blue screen of death or just instability! The maximum memory size is 4GB per slot…. so 8Gig total
@UKOFFY24 күн бұрын
@@TILLYSWorldVLog incorrect depends on the motherboard these models have many there is no bsod in this video!
@nickthaskater4 ай бұрын
Would be perfect if it had silent switches. Why are we still producing mice with obnoxious clicks? Likewise with the scroll wheel "clicks". Ugh.
@JM-vk1qg5 ай бұрын
unfortunately, the camera angle is off and too far away and 👎the tv is playing in the background. poorly done.
@1013VS5 ай бұрын
I thought the sensor was optical?
@ExtremeSquared23 күн бұрын
Dual optical for the slimblade -- to allow its special scroll mechanism.
@1013VS23 күн бұрын
@@ExtremeSquared thank you. Great product. Especially when using with non dominant hand, helps develop motor skills.
@CodySmiley5 ай бұрын
There are 3 screws under the round rubber sticker!
@RandyEpner5 ай бұрын
Thanks! It worked for me. I fixed the problem and will never touch another LG product
@officialWWM5 ай бұрын
Why are you mumbling? It sounds like you have a gag in your mouth!
@rawtruthisahardpilltoswall61805 ай бұрын
Do you know if it’s 60hz ?
@YiHogyun5 ай бұрын
it's definitely 60Hz refresh rate. You can check by hooking up a laptop to it and doing the www.testufo.com/
@MoldyCreations5 ай бұрын
thank you for your perspective, it is interesting to hear about your experiences compared to that of a younger person who tries to make every aspect fun when clearly there are always downsides
@whitedragondojo6 ай бұрын
Sir my highest respects to you for this.... very detailed and full of hidden gems for everyday survivors. :hat1: Also somehow you triggered this feeling in me and so I know that you have been blessed. kzfaq.info/get/bejne/j9eBiKuJy9e2Zn0.html
@frednunes49176 ай бұрын
There's people that still collect movies Dvds blu ray 4k its called owning you own movie s bieng a collector but some peaple go with streaming beacuse they dont care about owning are collecting movies discs plus its cheaper but i dont think itd out of fashion just saying.
@TT-ow7od6 ай бұрын
Where did you purchase these boot laces at the end? Thank you
@franciscom.e.97806 ай бұрын
Hello. With your sentence "Try to keep or hold the time," you made me remember the first minutes of Alice in den Staedten, by Wim Wenders.
@takenoshortcuts6 ай бұрын
You say camera turns off when the car turns off. Is that right? The battery you added is to power the camera when the car is off. So camera should stay on.
@tlteal6 ай бұрын
I have almost the same setup as you. I have 3 Delta Pro's with 3 Extra Batteries but also have the Smart Home Panel. Right now, I have one of the DP's + one extra battery going into one leg of the smart home panel and the other is one delta pro with 2 extra batteries. The benefit is that if/when the power goes out, the DP's pick up the load automatically. I have all of my circuits set to 110v because 240v gets a little more complicated and you cut your usage in half with the smart home panel. I also have it wired such that if all that fails, I can turn off teh main breaker and have my generator still feeding 6 circuits.
@MeshRoun6 ай бұрын
What is your setup and the gear you use to record and have enough battery?
@SaraahMode7 ай бұрын
Great video, enjoyed watching, Thank you for sharing❤❤
@ElliottMoo7 ай бұрын
Just received the SlimBlade Pro, coming from the expert mouse, I'm quite disappointed in this new model. I'm finding the accuracy at slow speeds to be shocking and not accurate. a bit jumpy or sticky/frozen. Hopefully ill be able to return this and go back to the expert mouse.
@jrgarciab4 ай бұрын
@ElliottMoo I watched another video that explains that accuracy will differ between wired, Bluetooth and dongle mode. Make sure to try all three and switch the DPI until you find the one that works best.
@ElliottMoo4 ай бұрын
@jrgarciab I tried all the modes. Going a higher DPI made it worse. In the end I found a firmware update that lowered the pooling rare and that fixed the issue completely. Now it's working great and love it.
@jrgarciab4 ай бұрын
@@ElliottMoo That's fantastic. Congratulations. I'm about to buy a SlimBlade Pro. How can I find that firmware update?
@sambailor7 ай бұрын
The gyopo experience is described very accurately
@MeshRoun7 ай бұрын
Did you pack some fountain pens with you on thus trip? I hope you visit a store in Japan! Safe travels!
@eprohoda7 ай бұрын
이호균~yeah~useful footage! 😎
@EternityIl7 ай бұрын
Nice, I’m going to Japan by myself next year when I turn 21!
@willl55247 ай бұрын
which is the best trackball you would recommend?
@joeyl35457 ай бұрын
I would have enjoyed this more if you had a good microphone. I could not catch many of the things you were saying. However I enjoyed seeing your collection of knives!
@MrTomengle8 ай бұрын
Did you leave the plastic on the screen?
@stevenmix7118 ай бұрын
I mean you said in your previous video that you were putting silicone lubricant on the bearings. I know from speed cubing that, enough silicone lubricant will make the cubes feel gummy when they turn. It could have just been the lube you were losing that caused it. Great disassembly video though.
@flyinryanfpv87638 ай бұрын
Just picked one up for $111! This video was just what i needed. I am planning to disassemble and use the slimblade pro in my HTPC keyboard project. I plan to 3d print a case that will hold the keeb internals as well as act as the bottom plate for the slimblade pro. The mechanical keyboard I am using (RK m-75) has a built in usb-c hub, so I will have the slimblade permanently plugged into its hub (hidden inside the 3d printed case). That way I can just plug a usb-c into the keyboard and it will charge both devices in the controller. This is really the only solution I could find to have a high quality wireless trackball merged with a wireless mechanical keyboard. Something like the Ploopy Adept would have been perfect if they had wireless figured out. I know I could probably connect it to a nice!nano for Bluetooth, but I have heard trackball support is very limited in zmk. Hopefully it will be there soon and I can do a fully custom build! Defiantly swapping the bearings while I have it torn apart though!