Daniel Ames

Пікірлер

@rcl99tlr65 Ай бұрын

thank you!

@Somebodys_Doppelganger Ай бұрын

Thank you my guy !!!!

@joemcgrath7446 Ай бұрын

I can't believe that. You just saved my life

@BillyBlaze7 2 ай бұрын

Nice work, looks like a real pain in the ass to get that tank off but could be worse.

@yassine123 3 ай бұрын

Yeah sure buddy, "changing" a catalytic converter. The feds are on their way

@michaelbailey50 3 ай бұрын

Nice to see poor man solution. Right up my alley. Grapple definitely not in my budget.

@user-ru7su3ym3j 4 ай бұрын

weld or bolt on a piece of 2.5 inch tubing 3/16 wall. brace bucket under tubing to keep bucket from bending

@frankwrogg2515 4 ай бұрын

Looks handy for the next zombie apocalypse also, 😂😂😂

@user-nl5ff2ew8t 6 ай бұрын

Looks like IAM gave up their website. Are they still in business?

@eltoritodechicago 6 ай бұрын

So how’s the catalyt working out? Still going strong even being kind of cheap?

@danielames7611 6 ай бұрын

Nope, it lasted about 2 years. Got another cheap replacement and will do this again in another 2 years prolly. Kind of a hassle, but a "good" catalytic converter is like $1200!! Fortunately these are easy to replace on this car.

@eltoritodechicago 6 ай бұрын

@@danielames7611 I hear you man on the same boat I find it hard to pay 1200 I’ll go this route do you know which one you bought I searched them up and a lot of them come out

@oldshooter1 7 ай бұрын

Forks look good but cannot find the vendor?😢

@no1but24 7 ай бұрын

I hope you’re going to put that wiring in conduit and bury it, you know critters are going to chew that stuff up.

@FISHERMAN331977 7 ай бұрын

Not sure what year your car is but it looks very similar to my engine

@FISHERMAN331977 7 ай бұрын

I have a 2012 Honda Civic LX 1.8 l. I want to try and change it myself and buy one on eBay but I'm afraid that once I do it that it won't pass emissions because it's an aftermarket?

@danielames7611 7 ай бұрын

I'm not aware of aftermarket cats having that problem. Passing emissions is kind of the whole point of replacing the cat, whether oem or aftermarket. The one drawback of aftermarket that I'm aware of is that they don't last nearly as long as a genuine oem part. The cat you see me install in this video died after 2 years. I'm due for another one already. A genuine part would still be functioning. If you don't mind swapping them out every 2 years, cheap ebay cats will save you a lot of money. If you want something that has a much better chance of lasting a very long time, then you'll want to spend the extra money (A LOT more money) on an oem part. Whatever you decide - good luck.

@ERSLIFE-we1mg 5 ай бұрын

@@danielames7611i have the same car i’m in California think that Cat you bought would work on mine? thanks 🙏🏽

@danielames7611 5 ай бұрын

@@ERSLIFE-we1mg mechanically, it will work just fine. Now I don't know anything about CA emissions law, so please do your research for your location. I'm just "a guy on youtube". Never trust a guy on KZfaq. :)

@ERSLIFE-we1mg 5 ай бұрын

@@danielames7611 thank you 🙏🏽

@nayeliespinal2438 8 ай бұрын

What if front loader doesnt want to work?

@danielames7611 8 ай бұрын

Well I'm no expert by any means, but if the front loader doesn't work, but you can still drive it around, I would suspect the joystick mechanism. If it won't drive either, you either have hydraulic leak, or your pump is dead. If you can get it to a real expert, I recommend that above my advice.

@khelix23 9 ай бұрын

I think my civic doesn’t have that part 😮!!!

@wellnessotr 9 ай бұрын

Yeah, but not when it’s in the engine compartment!

@MrRyanlipp1980 10 ай бұрын

Another video like this said not to use anti-seize on the hardware that mounts the Cadillac converter to the block

@greghercher2068 11 ай бұрын

Subscribed! I bought a new SA425 about a month ago and have been just learning how to use it here and there. Only has 20 hours on it now but I definitely enjoy seeing others and the way they are used/modified. P.S. I love your outro... "Let's go find something else to do!"

@NickStokes69 Жыл бұрын

Can you possibly help me? I have an 06 350z vq35 (DE) and I’m getting a code p1084. I changed the the camshaft position sensor on bank 1 bc I had got that code first and it’s a straight plug. I changed it and once I put my battery back on I received the code p1084. I researched it and found out it’s a code referring to the camshaft position sensor so I assumed it was on the driver side so I ordered it (the one with the angle) and when I pulled out the sensor on the driver side it’s also straight and I don’t have any sensors on that driver side with and angle. I have video and pics I just can’t upload them for you to see. Is that possible or am I missing that sensor with the angle. The one on the driver side says a29640 c20 on it and when I look up that part number it says camshaft position sensor for Nissan

@ELRODEOPICORIVERA Жыл бұрын

Now ur rams are super weak

@2LateIWon Жыл бұрын

How long are those spikes?

@danielames7611 Жыл бұрын

Exactly 3 feet

@Nscalestuff Жыл бұрын

For the past few months, my 08 civic check engine light has been coming on for a day or two, then going off for a day or two. I got the same code, cleaned both o2 sensors and the light went out for about a day, then right back on. Thanks for this video and info!

@Agustin-jo8mv Жыл бұрын

Hey Daniel, what is the thickness of the green rods? I am seriously considering making my own, on a quick connect plate. This would be very helpful. Thank you in advance. :)

@danielames7611 Жыл бұрын

My harbor freight thickness caliper guage says they're 1" 9/64... so probably 1" 1/8 :)

@Agustin-jo8mv Жыл бұрын

@@danielames7611 got ya! Thank you. That is good enough for me! I am thinking about using 1" rebar, it sounds like that should be comparable. Haha

@drewwally2702 Жыл бұрын

Great video, good ideas and use of surroundings. This made something intimidating look easy!

@santiagoreyna9136 Жыл бұрын

😂

@kevinshadrick943 Жыл бұрын

thanks!

@ride4kix Жыл бұрын

How to dismantle the whole tractor to get to the gas tank. Wow.

@michaelbarbic4512 Жыл бұрын

Great video! I’m trying to find an implement to use as a hand broad fork, to dig and slightly loosen garden beds. The soil has already been plowed and tilled so it looks like this would be a good fit??? Is it strong enough to do this??

@danielames7611 Жыл бұрын

Hmm.. I feel like these would be too long for that. If I come in too steep and stab them into the ground more than a few inches deep, my tractor usually can't lift them out. (My tractor is small, mind you). They're really long and the mechanical disadvantage is something you have to work with. Maybe if you found something with shorter tines? Or if you have a bigger tractor? I don't think it would work well with my little 24hp... Good luck in your search!

@mikeygee2465 Жыл бұрын

That was pretty impressive!

@ZumosGarage Жыл бұрын

Bro this vid rocks. You work just like me lol. No but yeah I’m about to tackle this soon on my daughter’s car and this “preview” of the job really helps. Thanks.

@ZumosGarage Жыл бұрын

Just did this and just wanted to add the new (Chinese $99) cat that I got went on great but the bottom bracket on the passenger side had to be bent and manipulated to get it to line back up with the existing mounting points. Other than that it was just like you show in the vid. Thanks for the help!

@midaslin1475 Жыл бұрын

Thank you, this helps a lot.

@billgyrotech Жыл бұрын

Did he fart?

@danielames7611 Жыл бұрын

Not that I recall, but probably.

@jamesonconde6624 Жыл бұрын

Awesome video. Simple to the point. Sorry about your front bumper cover getting caught as you were pulling away.

@skrotjorgenhellqvist6357 Жыл бұрын

Du har snabbfäste på lastarn... Ja tror du skulle klara av med med gaffeln om du sätter den direkt på snabbfästet istället för på skopan...

@Noah_E Жыл бұрын

This makes me thankful that I have a YT347 with the tank low and accessible.

@kenburner Жыл бұрын

Link to product is dead. 😢

@michaelangelo7511 Жыл бұрын

Wow! You ripped the tractor apart like a boss. Great mechanic skills AND a good guess on the problem. 👍🏻🇺🇸

@robertpoirier8520 Жыл бұрын

Thanks.

@storemannc Жыл бұрын

What caused algae? I have been using tractors 30 years . Never had this issue

@baytownbert2 Жыл бұрын

Excellent adventure from here! Thanks!

@kendallt2020 Жыл бұрын

most people never understand the winching power when the wheel is wrapped with a strong strap to wrap the direction in once freed unwhine. this was good too.

@Playamane22 Жыл бұрын

Can’t tell you how many times I squeezed the hell out of the thing because I read to push down 🤣 not the “push down” I was expecting

@frankcastle7777 Жыл бұрын

Some peoples mind is on a higher level of problem solving. Good work and GOD BLESS!

@Moselli56 Жыл бұрын

Simply brilliant!

@michaelohara2161 Жыл бұрын

I bought a 2”hitch receiver mount for $ 20 years ago and welded to to top of the bucket, in the same place. It allows me to move trailers, attach a wench if I want. I usually have have a mount with a tow shackle clevis on it for pulling stumps and lifting things. I can share any of the mounts with my truck.

@mars1952 Жыл бұрын

You beat me to it. I was going to say, grind all of that crap off of your ball mount and weld a receiver to your bucket. Later you can make or buy mounts for a shackle or a chain grab hook. You could also make a boom that mounts in the receiver and is supported by the front of the bucket. The list is endless.

@occamselectricrazor Жыл бұрын

thanks, very helpful

@gavinelliot3564 Жыл бұрын

Go hard.macgiver you got it son.proud of ya Jim bob++++++

@meauxsoutdoors8119 Жыл бұрын

Somebody don’t know about weight distribution. Don’t put any weight back there or your going find out what I’m what talking about the hard way. Look up fish tailing

@danielames7611 Жыл бұрын

Somebody didn't watch the whole video. :) I actually address that at the end (I know most people don't watch videos like this all the way thru. I typically don't either :) ) But yeah, definitely best to only use this for hauling things that are only too long, not back-heavy.

@meauxsoutdoors8119 Жыл бұрын

Gotcha. Nice try distributing the weight. I had not watched the whole video at first cause I already knew what the outcome was going to be. But at-least you tried to balance it. Good try thought. Just take it slow

@akbychoice Жыл бұрын

Pretty sure you need to move your lights back to be legal in most places.

@danielames7611 Жыл бұрын

Yeah, I think you're right. I'm thinking about getting one of those magnetic light sets that tow truck drivers use. Might have to splice it in though. 🤔

@brandoncooper1546 Жыл бұрын

Brah,that awesome....but,is that legal?

Ең жақсы KZfaq

Пікірлер