Wellll shittttt

Thank you for posting this! I found this video very helpful in a lot of ways. Ive never attempted a timing chain replacement because of the fear I might get everything out of alignment so this helps but I have a question. Do I or should I drain the oil before opening up the timing chain cover and should I remove the head to check the valves for damage as well?

That's a 2 wire connector. My Kubota ZG222 mower has a 3 wire connector. What's the 3rd wire for?

Trying to troubleshoot a 2012 2.4L Equinox. Wondering if it is the timing chain stretched and jumped a tooth or something else. Only codes that appear are o2 censor running lean and that appears randomly then disappears. Vehicle starts as normal but will sometimes sputter between 750-2000rpm and engine will sometimes die. Vehicle restarts without trouble. Random and unpredictable misfire occurs. Gas pedal becomes unresponsive while engine is fighting to stay running. Issue seems to lighten up and or disappear after motor has ran for 10-15 minutes. New air filter, cleaned MAF Sensor, Cleaned throttle body, cleaned PCV port in intake manifold, Intake and Exhaust camshaft solenoids replaced, plugs pulled and replaced, new O2 sensors. 95k miles on motor, and 500 miles on new oil change.

Did it bend the valves ?

I have a 363 and i love it

Hello, why didn’t you replace the intake and exhaust sprockets? Is it a simple replacement? Or is another/different balance needed?

How much something like this would cost to fix

Did you put the tensioner in last?

400ex

Yeeyee thats how it’s done baby

Thank you 🙏🏽

CONSTANT PROBLEM with my F2690 great mower otherwise! thank you!! Be well

I've done a few timing chain/belts and even if I think I know how to do it I watch a couple videos incase I'm missing something or for any tips. This was the first video I clicked for an Equinox and you sir are amazing! By far the best repair video I've ever watched! IDK what other videos you do but I liked and subscribed.

One of the best videos I’ve seen on timing chain replacement. I need to do on my 2012 Malibu. Looks daunting

when you rotate the motor, lets say 2 times around or even once should the timing marks and arrows still line up? in these videos i dont see anyone rotating as if it doesnt matter. im not so sure

Hello just got a boat with this motor how do i do the fuel mix?

Great video, thanks!

I really enjoy repair videos. Subscribed and liked

the 361 has always been my favorite boat......ever.

How many horsepower?

Do you like an LT or LGP?

Whats your favorite type of trail riding?

Whats your favorite dozer?

Hello there I have this problem rebuilt the engine 2013 2.4 . And know every time I startthe car a winding noise coming from the timing chain area . Pulled off the oil pump cover replace the timing, chain and gauge again still making the same whiny noise.

What your favorite year ltz400 or suzuki quad?

Yes I justed subscribe due to the informative video you put up. Thank you for your knowledge and expertise.

Love the way you installed this kit

Hello guy, I'm going to look at a 2011 one with the same issue but what's the approximate price to replace the set up?

If you do not get a code for this issue, and do not have a clanking sound, and the vehicle is 150,000 miles[2014 equinox ecotec] am I good to drive for now at least? I bought this thing with 140k on it, probably a dumb decision in retrospect. Have already replaced cat converter and have put a fair amount of cash into it for maintenance. It has a smog pump code on but that's it. I checked out the carfax and I am not sure if this vehicle has had a timing belt change or not. If it hasn't, then obviously it's been due but..

If the video was helpful give a like. If you have any questions leave a comment, or subscribe to keep up with the latest videos. Thanks for watching.

my p0010 code popped up on a pontiac g6 2.4 ecotec i’m hoping it’s the wiring i don’t feel like having to change the timing chain in my apartment parking lot atleast not just yet

If your not replacing the phasers' is it necessary to remove them.?

Keep tappin it till it don't work no more :) That is my motto :)

Hello I checked my pump and it makes a noise could it still have quit? I noticed no fuel in the line when I took the hose off? The solenoid clicks is it possible it’s the solenoid. Thanks for sharing vid

Is it ok if the old chain is a half link off

Thank you 🇺🇸

I want your personal phone number. You are absolutely amazing. No bullshit. That was the most educational video. I didn’t want to skip. I didn’t wanna change the video. I watched it all the way to the end dude please don’t stop making these videos. You’re a lifesaver you literally just explained everything that I’ve been trying to get a technician to teach me for about three or four months now absolutely amazing, thank you I can’t say that enough

My daughters car is a 2010 2.4 Equinox. It died on the highway. I had it towed home and took the valve cover off and the bolt that holds the intake phaser sprocketvon the cam broke. I guess i would have to remove the cam and takevit somewherevto have the bolt removed...i did notice the sensors had heavy crud on the screen. Did that cause this? Is it worth fixing or should i junk it? Thank you for you video. It helped me a lot.

i have a 1992 ranger 362v its a cool boat

Is it necessary to replace the balance chain kit?

Very thorough thanks for posting

Great video so helpful, laying the assembly out on the bench👍 camera angles, lighting, hi-speed parts👍 "timing" of of your explanations, adding the torque specs, & adding #s & arrows👊. Thank you for putting in the work

If that doesn't do the trick, check for obstructions in the fuel pickup tube in the fuel tank and in the fuel line from the pickup tube to the first fuel filter. Despite being careful to keep debris out of the tank, I found a "glob of goo" in the fuel pickup tube.

This is one of the best videos showing cam and balance chain replacement. You are an excellent teacher, and your breakdown of using a degree chart is a game changer. Thank you for the torque specs also. Keep up with the videos. This one is gold.

Thanks for putting together a great video!

How feasible is this without a lift?

Are you hook up the transom hook you strap the boat to trailer, how do you keep the line out of water from motor, is there a float on the rope in not seeing

I have 1990 version of that boat. It has the same pattern. Mine is gray where you have maroon. I have a 91 xr4. I would love to my hands on a regular tempest. Where are you running the prop below pad and what speed are you getting?

If the video was helpful give a like. If you have any questions leave a comment. Check the description above for links to other videos on the channel or subscribe to keep up with the latest videos. Thanks for watching.