I want the name of the application

Does this has app access?

We just purchased it a few months ago. We like it so far but during any cicle it stops and the light turns red. We checked all the issues posible in the manual, we checked everything, all ok, but keeps doing it. Basically I press the start again and restart the circle but after 1 hour or so, stops again. Do you have any ideas? What can we do?

Unfortunately looks like the non-Wi-Fi version has been discontinued….

The Shark has a major problem!! After only 6 months of use, the Charger connection to the unit began to melt and unable to charge. It was so hot that it melted the connection on the unit. I WAS very afraid that a fire would start. and kept a fire extinguisher close by. I've tried to contact Seauto to get a replacement, but have gotten a huge run around. I have not had a pool cleaner for almost 3 months!! Seauto, PLEASE HELP!! Dan

although we have a Betta, it gets beached on our zero-depth entry. we have a dolphin vac robot that has tech to prevent that issue, so hoping the same tech is in place for the skimmi. any idea if the infra-red sensors will prevent beaching? I see it works on your tanning ledge, but unsure how that translates to 0-depth

Hi David Thanks for a great video. I have a glass/Plastic roof.... Do you think the sun can still charge the battery through the roof? Thanks very much and have a nice day.

Are the wheels coated in rubber? All cleaners I tried think it is a wall, so I thought this one might be a good option. Unfortunately, there aren't that many reviews out there for it.

I have the Betta SE Plus, and one problem that I run into is that it can't handle the cord from my corded pool robot. If I ever forget the robot in the pool, the Betta will eventually get stuck on the cord, and the water can get quite messy as it just sits there. I've been tempted to switch to a cordless unit to better support the automated skimmer, but I really want to see what more companies do with a dock similar to Wybot's S2 Pro before I dive into that. I think the most awkward part about these automated skimmers is that it makes me question why even consider a Beatbot Aquasense Pro for its skimming function. If you use it, it will just use up the battery to do a job that these automated skimmers can do "for free" (i.e., charged by the sun).

Hey, do you mind if you share the contact number of the poolmate company base in the United States because I couldn't find it. Even I tried to dial they said it's no longer exist. Can you help on this? Very appreciate

Why not a fine filter. So I still have to clean the dead algae etc.$

What is the surface cleaner that is in the background?

Where can I buy for a couple of hundred? I find it for $529!

How do you compare vs the L1 Wybot?

“Baby Aligator” haha. Are you in Florida? I bought this Skimmi, will arrive this Friday. Hope I will like it.

Own the Cayman; it does not scrub waterline. Now you can purchase a nano filter upgrade on line.

How long will this stay in standby without recharging? If you can schedule cleaning time for the week will the battery last a week assuming it hasn’t run and just sitting at the bottom of the pool waiting for the scheduled clean event to start?

hey David....I just got my new S2 Pro, charged it up can turned it on....the unit came on, and settled in the "Floor" mode.....I and not able to change modes at all....I turned off and tried again with same result....I think my unit is bad....thoughts or tips to troubleshoot?...thanks

I'm kind of in a weird spot when it comes to these cleaners. I'm interested in getting one without a cord as it causes problems for skimmer robots, but I think we're only just starting to see some of the limitations get removed from cordless pool cleaners. For example, Wybot's new S2 Pro has a dock that allows it to communicate while the robot is underwater and also charge when it's done, which sounds really nifty, but honestly... I'm wary about the company's long-term support. I sent them an inquiry about the S2 Pro a week or two ago, and I never received a response. Their website has a serious lack of information on it (detailed functionality description, user manual download links, etc.) and I needed clarification. One advantage of incumbents like Maytronics and Polaris is that parts are fairly common and there's good information around. So, I could see Beatbot coming out with a docked unit within a year or two to compete with Wybot. Although, given the Aquasense Pro is touted as having a fairly potent internal processor, I guess it's also plausible that a dock could be a potential future upgrade for the existing unit(s). However, as is the rule with anything, do not make purchases based upon promises or guesses!

Hi David My neighbor and I bought Skimmis about a month ago when they first came into Canada. Generally, I agree with your findings but can add a couple of comments: I don't have a main drain in my pool, and skimmi never gets caught at the skimmmer. It has plenty of power to pull away. Twice now, I caught skimmi trying to clean the pool going backward. I was ready to take it back the first time, but my neighbor said "no problem, just pull the debree tray and put it back in". Sure enough, it worked. My personal feeling is that this is a very good cleaner, but may have been released before all the bugs were worked out.

Hi, the flap in the basket is not installed correctly. It use gravitation to open and close, you can disassemble it easily and reinstall it correctly.

I would have liked a little more of a review on the Strand bars, it's one of the new features and the reason I bought mine because I have a full length steps at the shallow end.

This thing is amazing. I have the one where it just runs of the suns energy. I have left it in the pool all summer on and running. I haven’t had to skim since expect for a few times I wanted something out really quickly. This thing costs 300 but probably takes 10 dollars to manufacture and still I would pay 500. It’s pretty damn good. Saves a ton of time. I pair this with the Dolphin liberty and the pool stays cleans all summer with minimum effort.

A firmware update on the seauto crab has basically diminished the water line scrubbing - watch out for updates on this one !

Talk about the price…have you seen the price of the new Beatbot Skimmer 😮

Bought the Aiper Surfer but the legs don’t extend long enough and so the skimmer keeps getting stuck on my pool stairs. Anyone come up with a solution for that? Would the Betta skimmer be any better?

Hey Buddy, do you know what the difference between the Scuba S1 and Scuba N1 is ? They have both on their website.

Will the Quantum work in an hard sided above ground pool?

Hey David, could you also review the Beatbot iskim Ultra, and where can I buy this Dolphin skimmi? I don’t see it for sale from Amazon. Thanks.

I just noticed when looking for those sensors and what I found was a silica gel in the lens right where the LED lights are. Does your S2 have the Silica Gel in there too?????

The Wybot S2 does not have ultrasonic sensors and what you were pointing out in your video the 2 round holes are nothing there. Get a flashlight and you will see it is blank with no sensors. The Wybot S2 has no sensors of knowing if there is anything in the way. Does not have an obstacle sensor. The Wybot website only says that it has an Infrared sensor, Depth sensor, Sonar sensor,, and Six-axis Gyroscope. This S2 robot will go straight ahead and hit anything in its path.

Honest recommendation.. between, dolphin nautilus cc plus, aiper seagull pro and hydro 4, which one you recommend?

Hey, if i use cordless hydro 4, and use a robotic skimmer, do you think it works? I knew if cordless completely is ok, but hydro 4 cordless have a floating battery. Can you do the experiment with all manufactured skimmer that yiu may have? Very appreciated!! 12:53

Nice review! Thank you, I was contemplating buying the Aiper and your review affirmed my decision!

Where can I buy the ultra fine filter please?

Hey David, thanks for this review. I also have both of these cleaners. I can lift scuba s1 out of the pool with the hook and with my hands; but scuba s1 pro is too heavy for me to take it out of the pool. Note that my hobby is same as yours, i also like to collect pool robotic cleaners. I wish some engineers/pool robots companies will invent a system such that it can lift the robots out of the pool, no need to use the hook.

Thank you for getting back to me do you know what cleaner comes with all the options unlocked or for free Thanks, Mark

Hello, can you please advise, how I can get ultra fine filter for Lydsto P1 Max. It's good machine but I want to make it better

Hello, Thank-you for the review and I bought the skimmer from your review. Question: I plugged it in to charge last night and this morning I pressed the on button and all 4 lights go on and shut right off. I just bought this and do not understand why it will not stay on. Please let me know what I am doing wrong. Thanks so much.

Hi, is this possible to use in a saltwater pool? Thank you !

Hey David, do you when the WYBOT S2 Pro is available? For the charging dock placed inside the pool, what if another pool robot clean the waterline and it will “clean” this charging dock too?

Thanks for the differences review. I bought the S1 because I wasn't going to spend the same amount of money on a replacement motor for my wired Maytronics Dolphin robot that only lasted a few years and was closer to $1k. Compared to my first robot, an Aquabot Pool Demon and the Maytronics Dolphin, the Aiper S1 filter box fills flimsier than my previous two robots' filter box/frame. Although I've only been using the S1 on floor-only mode, it's been cleaning for slightly more than 180 minutes (that's 3 hours plus some minutes). Also, it takes the same amount of time to fully charge (solid blue light) the S1 (3 hours) instead of the 4 hours it says in the manual. 3 hour cleaning time is GREAT! That's a longer cycle than I could do with my Maytronics Dolphin (only allowed a 2.5 hour cycle, then I had to go back out and make it do another cycle, regardless of how much the basket was filled). My Pool Demon was nice that I could leave it on all the time when I started up the season, and would just clean the basket in the morning and evening and basically had it cleaning all the time between filter bag cleanings. Cleaning a filter bag is messier than cleaning a mesh basket, but I think the filter bag did a better job cleaning fine debris better than the Dolphin. Hopefully Aiper stays in business long enough for me to buy parts when things start failing in the unit. We'll see how the Aiper S1 holds up.

Is this better than the Poolbot B150 and how is it compared to Aiper Seagull Pro

Hey, thanks for the review, but I confuse, if I want 2 in 1 mode, which one should I buy? Cord or cordless? Or if for example I buy cordless, I need to buy the cord separately?

My liner has some wrinkles on the bottom of the liner. Will it work good with the wrinkles?

Mine came with an even finer white filter

Climbs the wall what about the rest of the pool

Price aside, how does this compare to the Wybot S2?

I wonder if all of the Scuba pro being returned with issues I don't see any refurbished S1 pro on their website, are they selling the return items as new and not replacing any parts . I bought one and they sent me another one which they said was new but also had a problem with that one. My first scuba pro will climb the wall and when it starts to come down it falls off the wall in the deep end but won't do it on the shallow end. The second one they sent me again they said is brand new,,,one of the motors would not start. I had the Seagull pro and had no issue with that one except the control knob would be hard to turn and the lid to remove the basket would not close.

Sorry but this is a bad designed robot! It's very slippery on tiles It cant climb on walls if the corners are curved and with tiles The navigation is not existent and laughable, it can stay on a corner for two hours and leave a huge part of the floor uncleaned. The tracks are slippery and the robot is too light, so when it hits a corner on angle its drifting by its momentum and it goes on a completely different path leaving the rest of the area dirty! (Yes i removed all the air when singing it, and also removed the microfilter in case it could achieve better suction power) The Microfilter is a joke, there are two huge holes left and right where all the unfiltered water passes through into the propellers The garbage bin if its slightly dirty, the dirt blocks the lid from closing and when you lift the robot it spreading debris into the water I upgraded it with Firmware V1.01 but absolutely nothing changed! This should cost 100$ and be advertised as a toy... Very unsatisfied!