Awesome!! I'm planning to start modding mine based on a lot of your incredible work with this model. Just curious, will you be doing a comparison with your stock build vs your modded build when both are done? I'd love to see a detailed comparison! A lot of the mods seem really cool, but also a bit beyond my skill level, so I'm going to kind of pick and choose which ones to do to mine.
@pattersonmichaelАй бұрын
Thanks so much for posting/sharing this. I am done with this model except for the decals and really had no clue with the water slide and directions for peel off. This was a massive help!
@ithink2ezАй бұрын
That looks damn good without the pink backing
@singleproppilotАй бұрын
The crosshead bearings aren’t bearing on anything, which is why the rods are wobbling.
@douglasskaalrud6865Ай бұрын
Yes.
@douglasskaalrud6865Ай бұрын
It wouldn’t be tremendously difficult to make them but they would block the view. Maybe if they were made from acrylic?
@michaelmartinez91852 ай бұрын
MICHRELTFDDDSKKKKJR
@michaelmartinez91852 ай бұрын
MICHELTFDDSSKKKKKJR
@michaelmartinez91852 ай бұрын
MICHELTFDDSSAKKKJR
@robertevans81262 ай бұрын
Where did you get this fine model kit???????
@MarvelPhxАй бұрын
www.agoramodels.com
@claiborneeastjr41292 ай бұрын
Really nice. The Titanic had three such engines, did it not?
@oldadder2 ай бұрын
Only 2 engines of this type plus a low pressure steam turbine
@user-do8ul2zi4v2 ай бұрын
Not an exact replica with those connecting rods wobbling all over place.
@sam-vn3vg2 ай бұрын
Les make 200/200 titanic model 🔥
@SeanRCope2 ай бұрын
Need to hire some greasers to keep that running smooooooth.
@leew88122 ай бұрын
Great job. I followed your guide on your website. Thanks so much for sharing. It made a hell of a difference.
@Bunz6853 ай бұрын
Thats the XL edition right? Im planning on getting one soon
@a-guy19123 ай бұрын
I want this where can I get it
@MarvelPhxАй бұрын
www.agoramodels.com
@joeerickson5163 ай бұрын
"Terrific!" 👌
@misterbee45743 ай бұрын
I'd update the headlights to warm white and lose the yellow looking ones.
@BuckmansModelMania3 ай бұрын
Great improvement Todd. I did my own mod so I won't be doing yours. When watching the video, I noticed something I didn't catch on the live stream...both of them have enough vibration that they are actually walking across your mat...lol
@michaelmartinez91853 ай бұрын
MICHELTDSSAkkkKJR
@sulljoh14 ай бұрын
I hope eaglemoss gives you the rest of the bits
@MarvelPhx4 ай бұрын
I'm receiving my remaining parts from Fanhome, so I should finish the model.
@linkmasters5354 ай бұрын
I would like to do that as well but also the 4 bottom circle would be the turn signal in amber light modify
@johnsledge39425 ай бұрын
Definitely planning to do the resin windows on mine, it looks so much better
@grantlichtle955 ай бұрын
That's the worst model to build so don't buy it ain't worth it
@andystewart94055 ай бұрын
Absolutly amazing job! Would you sell the full diagrams for wiring,parts and code at all?
@MarvelPhx5 ай бұрын
All of the details are or will be soon on my build site.
@andystewart94055 ай бұрын
@@MarvelPhx you have a phenomenal website! Im currently collecting the Delorean and Enterprise i will be following your build when i start them 👌🏻
@andystewart94055 ай бұрын
Thats amazing! How did you get the app thats class 👌🏻
@MarvelPhx3 ай бұрын
I created the app myself using the MIT App Inventor.
@waggenerct5 ай бұрын
On your stock Enterprise did you paint the bussard em field protector or is that a new stock part?
@MarvelPhx5 ай бұрын
The stock build is using the replacement opaque part.
@waggenerct5 ай бұрын
Nice. Waiting on new parts to ship so I can get started. Thanks! Can’t wait.
@waggenerct5 ай бұрын
Would love to see a video about what Fanhome has changed with the reissue.
@MarvelPhx5 ай бұрын
@waggenerct Fanhome didn't change anything, they picked up whatever EM left behind and finished the existing production.
@joeyqz6 ай бұрын
And yes, would u consider selling the Arduino automation as a kit?
@MarvelPhx5 ай бұрын
Unfortunately, I don't have the time to put it all together as a kit. Perhaps one of the partwork mod companies will?
@joeyqz6 ай бұрын
I too am stock piling all my parts till the last one arrives before I start this build using ur guides. I am excited about learning the Arduino process in controlling all the LEDs and sounds. I have the Arduino R3 board and now want to focus on the codes u created and upload them. This will be a very daunting task!! Ty for the absolutely fantastic instructional videos!
@TITAN30843 ай бұрын
Take in consideration, that the mods really take some time and often u need extra parts, tools, practice (f.e. for airbrush ) and so on. I would probably need over one year, even with all parts laying in front of me 😅
@R_T_Ralph6 ай бұрын
thats just another level. My mods are good but this really is great.
@pattersonmichael6 ай бұрын
What a great video update, thank you for sharing. You are extremely talented!
@user-xr9fd2eq8z6 ай бұрын
This is a really incredible build - most impressive I’ve seen by far! I just subscribed to the kit but wish they would offer an accelerated shipping schedule. Would you ever consider selling your lighting and automation setup as a kit?
@zepmaster57666 ай бұрын
I've been planning on following your build, stock piling all the required electronics and stages until i had enough i felt i could really get going. thank you for you guide please keep it up i have no idea what I'm doing so it is an enormous help!
@JMTugboat6 ай бұрын
Damn! You are one clever guy. Looks awesome; super jealous!!
@fcontreras876 ай бұрын
Its wild to see this all coming together. lots of long days/nights figuring all of this out, great work @MarvelPhx
@relentlesstorm6 ай бұрын
Incredible work Todd! Can't wait to see this thing finished up. Amazing how you modified this along the way and created an app to boot! Great job!
@deeharris19086 ай бұрын
Organised chaos but, best lookin model ive seen yet, lookin 4ward 2 the finish, nice update todd
@MegaBadgemanАй бұрын
Yeah the detailing on the saucers edge looks great. The stock kit has none at all. And the panels seems to fit a whole lot better.
@PitstainHobbies6 ай бұрын
Excellent overview of how it works, and most likely the coolest most TV accurate Partwoirk 1701-D model in this solar system.
@genevieve.annabelle32967 ай бұрын
I wanna get the 1/200 model ship and put this in it ❤️
@EnsignRedSquad7 ай бұрын
Excellent work. You may wish to program phaser firing LED strips too. It helps with the effect.
@jssl-1515-peace7 ай бұрын
Lot of the sound effects are incorrect
@doubtsalmon7 ай бұрын
You have to make this a kit. I would pay good money to stuff this all into an AMT 1/1400 Ent-D
@craigdollars83338 ай бұрын
Absolutely fantastic work I did want to do this build but put off years ago with so many things not screen accurate the bridge is the biggest put off and the windows by god Fair enough a easy mod for brige but light bleed omg. I did eventually signed up but cancelled
@outsider2388 ай бұрын
To each their own but I honestly don't understand why it's acceptable to have to do so many modifications to a model that ends up costing over $2,000. This should not need modifications for what you're paying and the idea behind these kits which is to end up with a beautiful model "out of the box". It's disgusting that the then Eaglemoss never even had any of their employees actually build this disaster to realize all the issues it has before it was released to the public. The overengineered lighting, the ridiculously tedious and tiny window inserts and the light leaks all over the thing is inexcusable.
@timvasquez19498 ай бұрын
I can hear you fine
@sebastianposchke82189 ай бұрын
can you speak without smacking your lips all the time...that sounds disgusting!!!
@David-kw5um9 ай бұрын
when will the lighting be for the ladder 9 ?
@MarvelPhx5 ай бұрын
Are you looking for a 'final' look at all the Ladder 9 lighting?
@David-kw5um5 ай бұрын
@@MarvelPhx Yes, I'm waiting for you to post the final version of your ladder :) .
@Krobra919 ай бұрын
im excited i jus started mine this month
@nyglover9 ай бұрын
All I have to say is wow. Voyager, NCC 1701, defiant , Kelvin I mean do I need to go one. Holy wow
@johnatsf15649 ай бұрын
Im really enjoying this! I hope you make more video's for the build the Enterprise-D! Great content!