thanx for the video. Had 3 broken wires repaired them now spinning again. U saved me alot of money to book it for repairs

Be extremely careful with deionised water, it’s AKA hungry water, as the ion is removed, its more corrosive than standard tap water, when using with Bigoi pressure washer you should be flushing with tap water after using it with deionised water, and avoid letting it sit in there after use. Possibly why the zinc plated pressure hose fitting are starting to corrode. Great Video

JUNKJUNKJUNK

That round thing you unplugged is your shifter actuator it helps the washer determine what speed you’ve selected for your cycle.

Hello I am very interested about this business. Key copy. But I don't have any knowledge in it. How can I study and learn skills? Thank you

💯😎

Living Australia I must say something is definitely up with our wifi connections. I'm with TPG and for some reason my otofix OBD scanners won't connect to the wifi and some of our iphones have issues too.. but my Samsung and my old foxwell obd scanner connected fine. Don't know

Hey!, i got the same setup, but no manual with the trolley. I was wondering what the single black bolt was for?

So helpful mind was not spinning the blue wire was broken put it together and boom my machine started spinning again.Thank you so much gor the video

Awesome video mate. Quick question, what is the dilution ratio fot the Aquaseal pro? Ive been using 40mls per 1000ml. But i noticed in your bottle its much less.

Thanks for sharing

This is a great solution for most people! For anyone running a home automation system, you can do the same thing for au$5 with an ESPHome installed on a $5 Esp8266, connected to your home automation system, such as home assistant.

Idc how fast my internet is within reason, as long as it’s stable. Sick of losing signal.

Are you concerned with the power draw on the battery from the Uni?

Do you have a link to the bodies? Can't find any...

Here is the Part number for the Complete Valve Unit including the Buttons from Reese Plumbing 1843114 cost $85 as of June 2024

What’s your setup to get the dose??

👍

I was expecting to see one of those BT battery voltage monitors... Clever solution!

It looks like the water filter has a bypass option that allows you to only connect the hose to the filter and either filter it or bypass the filter. If it has that option It'd be a great value... Fantastic video. Could you link the two products you used? It lloks great!

You don't have to stretch the seal over the top. On the stem are 2 press in catches that will allow that top piece to be taken off and the seal replaced easily. Also double check the tabs that lock the tower section aren't worn or loose as this will let the tower tilt and not seal. Check the cistern level to ensure it is not too full. The adjustment screw is the white plastic on on the water inlet module.

New LED's arrived today. After 3 hours and watching your video I have successfully replaced the LED's and all is working wonderfully. Thank You very much for providing this video, very helpful indeed.

Hey mate, can you confirm if your pump runs for a few seconds after the trigger is released? Mine seems to continue to run for 5-10 seconds but cant work out if this is normal. Other youtube videos seem to show that the pump stops instantly after releasing the trigger

omg, ive been getting a similar sound (albeit at slower speeds), and had no idea what it could be, just randomly shot it into youtube an found this, bloody legend!!

Does both

Can I use these settings on ZF8 ? Trans N55

Unrequested tip: Apply the foam to the car prior to rinsing first, it will work much better.

Using foam cannons are so satisfying especially with a nice fluffy coat

Would like to know how to adjust the flush for a bigger more water flush?

I know that the video is 2 years old, but have you tried to do a CAS 3++ downgrade in order to learn a key or read ISN on bench without JBE for me it fails all the time. (even with godiag CAS 3) Xhorse does not don't answer me... well done, what you are doing is great =) kevin a French fan =)

does this machine cut lockwood keys to code??

You sir are a champion. I had the same issue, same monitor. Made the purchase and made the fix, with less confidence than an iceberg in the desert... But it worked and it's FUCKING BRILLIANT!! Cheers mate!!!

Would imagine so but would this be the same for a e82 128i?

just noticed bout the red wire loop wnder why?

Hello, Mr. Engineer, I am Fatemeh from Iran I watch your training videos, thank you very much for your good explanations🙏

amu updates with these settings ?

One of the few videos that show the performance of this machine (with 220v). Great video. If you ever consider posting another video could you maybe include the 40 degree white nozzle as well? Really interested in seeing how fast it removes the soap from the car with that spread. Also perhaps a water flow test (in a bucket) to check, if it hits the 9.2 ltr/min mark.

You need to replace the red oil cap on the pressure washer and put the black one that come with it

I also experienced the same problem with my unit, the circuit board also failed.

Wow that works really well im totally sold im ordering one!

Trash company makes trash products 🤷‍♂️

I have the bigboi blower and you don't need a towel after you use it to dry the car it has a tonne of power👍 The only issue I have with it should really be the 6mtr hose it should ship with or there should be a choice when buying it either 3mtr or 6mtr. other than that it is quality.

The red cap, is only for shipping. You MUST replace it with the black pressure release valve (oil cap?).

What garden hose adaptor did you use. Can’t seem to find one that fits/clicks in properly L

Very niche issue, glad I found this

Old post, but what does it mean when flash is all ffff?

Have you done any laser cut keys with it yet looking to buy one currently ?

@testandtune6096 Did you remove the cartridge location pins? Because in the instructions it advised that if you have a high flow pressure washer, that you remove them.

how to order this Fusion EN-AB2122 DUAL 12" 1000W Active Subwoofer

Anyone trying to find the seal 1817016 on the internet, please don’t bother getting it from eBay as they are ripping you off selling each seal for $22, even you can purchase the same item from Reece for $6 bucks. It’s one of Reece’s own brand.