Round 4 of competition/fun runs!
15:14
Drift Vette build update! (wiring)
14:32
CMD $1000 dollar Competition event
15:59
Пікірлер
@muddymo7641
@muddymo7641 23 сағат бұрын
When you install coil over struts on the front of 94 mustang, do you keep the factory coil springs? I've been told both ways
@DGGarage
@DGGarage 22 сағат бұрын
@@muddymo7641 no it’s got to go
@muddymo7641
@muddymo7641 21 сағат бұрын
@DGGarage firestone told me the opposite about 4 hours ago. Took my 94 gt there after removing stock springs and struts a put coilover adjustable struts on. Also put new lower control arms on. Said they were not set up to do a simple alignment on it. Also said I was supposed to leave stock springs in. Frustrating. I watched about a zillion videos on how to do it. And I didn't see anyone leave them in. Thanks for responding
@DGGarage
@DGGarage 20 сағат бұрын
@@muddymo7641 yeah get that stock spring out of there. I have seen so many people say that and it is so dumb.
@muddymo7641
@muddymo7641 20 сағат бұрын
@@DGGarage that's what I thought. Part of the reason I put the coilovers on was to eliminate weight getting rid of the springs.
@charliedee9276
@charliedee9276 2 күн бұрын
The hood, I need that scoop. In fact just send the whole hood, it's the right color too. Seriously, what scoop is that? I purchased the ABS delete kit from them after seeing this vid. My 2000 has a fried EBCM, the one that cannot be repaired.
@DGGarage
@DGGarage 2 күн бұрын
@@charliedee9276 lol it was on the car when I got it. Everyone loves it. Wish it was not so heavy. It weights a ton
@mikemoreno7329
@mikemoreno7329 2 күн бұрын
If melling thought that it needed to be shimmed, they would have sent shims with the pump
@lionsgarage
@lionsgarage 3 күн бұрын
sweet ride
@seanmarrero3461
@seanmarrero3461 4 күн бұрын
I needed this. Thank you
@jeffcobb3706
@jeffcobb3706 4 күн бұрын
Is there such a thing as an operators Manuel for this?
@JohnTraeKing
@JohnTraeKing 8 күн бұрын
4.6 engines LOVE 4.56 gears!
@alexgutierrez1346
@alexgutierrez1346 10 күн бұрын
Great info man!
@rupertomtzjr
@rupertomtzjr 11 күн бұрын
Good Day Sir! At 2:27 of our video I think I see both fuel injector rails between the manifold openings. If I'm correct about the fuel rails...Do you know if the fuel injector rail is the exact same configuration in a F150 2013 Ecoboost. I've been trying to find a diagram and/or a video with the location of the fuel injectors WITH NO SUCCESS. I might have to replace the fuel injector for Cylinder 2.
@DGGarage
@DGGarage 11 күн бұрын
@@rupertomtzjr yes the fuel injectors are indeed under the intake between the cylinder heads. I haven’t seen these injectors go bad before and I work on a ton of them. What problem are you having
@rupertomtzjr
@rupertomtzjr 11 күн бұрын
@@DGGarage THANKS FOR SUCH FAST REPLY!! I have a Cylinder 2 misfire. I change the spark plug and I just ordered a coil pack (both parts being Motorcraft). I cleaned the turbo inter-cooler and I ordered the Turbocharger Boost Pressure Relief Valve (as it was damage when I checked it). Once I get all parts, install them, and if it still misfires...I'm thinking it might be a fuel injector. I'm just trying to think ahead to the next step.
@DGGarage
@DGGarage 11 күн бұрын
@@rupertomtzjr I have seen coils go bad on these trucks. I think that will fix your problem!
@rupertomtzjr
@rupertomtzjr 11 күн бұрын
@@DGGarage Thank you!!!!! I'm not mechanically inclined AT ALL. Everything I've done and learned is from Y.T.U.-"KZfaq Univeristy" and the good "Professors" such as yourself. Thank you!!!!!!!
@alexgutierrez1346
@alexgutierrez1346 11 күн бұрын
How well did this end up working for you?
@putotumama8353
@putotumama8353 12 күн бұрын
DERRRRRR
@hunterhudson7712
@hunterhudson7712 13 күн бұрын
Mine is giving me the same code except when I was backing out of my driveway up hill it just died. Cranked back up fine and then died again. Once I got it back in my garage, I cranked it and it ran for a while with no problem or miss. Any ideas?
@stevenhenderson4955
@stevenhenderson4955 13 күн бұрын
What corsa exhaust kit IS that?
@MrMcCoy-vs6ss
@MrMcCoy-vs6ss 14 күн бұрын
Best, most worthwhile video of 2024
@cjcoleman7372
@cjcoleman7372 14 күн бұрын
Smarter, not harder!
@Dylanskinandscalesfishing
@Dylanskinandscalesfishing 14 күн бұрын
At the mess it with stereos for over 30 years I installed one like this in my truck and it was totally come with everything and it was already pre-wired and all clip and play
@ericksoncristobal2132
@ericksoncristobal2132 14 күн бұрын
Thanks for this, saved me from blowing some $$.
@Taterbuilt23
@Taterbuilt23 14 күн бұрын
I dig it
@supermanclarkkentsr4667
@supermanclarkkentsr4667 14 күн бұрын
98 👍
@marcosmelena7507
@marcosmelena7507 15 күн бұрын
Nice truck brother have that same truck same color in a Stepside version with btr stage 3 truck cam 3600 fti converter an 4.10s an truck
@MrAaronSanchez1
@MrAaronSanchez1 16 күн бұрын
Great. Now I have 11 magnets AND a nut in my transmissions sealed bell housing.
@jjfoster90
@jjfoster90 14 күн бұрын
That be my luck
@ManicMacnCheese
@ManicMacnCheese 14 күн бұрын
​@@jjfoster90right 😂😢
@pushermanva757
@pushermanva757 14 күн бұрын
😂😂😂😂
@---skynet---
@---skynet--- 13 күн бұрын
Exactly
@jimmyfreeze3782
@jimmyfreeze3782 17 күн бұрын
Here is a 59 second install video from Melling on how to install their oil pumps instead of listening to this idiot. kzfaq.info/get/bejne/sOCqabGcvbrVYmg.html
@Illest1887
@Illest1887 17 күн бұрын
Very cool! I bet its a handful!
@DGGarage
@DGGarage 17 күн бұрын
@@Illest1887 it’s definitely a hand full but so fun
@pitbullbite5835
@pitbullbite5835 18 күн бұрын
Squared slot on gear for a round pin that breaks eventually... Threw my timing off and cost me a complete rebuild... Ford 3.5 sucks @$$...
@saganshipley6376
@saganshipley6376 18 күн бұрын
Cool
@gimpgangster
@gimpgangster 18 күн бұрын
I need that in a Fox body lol
@jesscneal
@jesscneal 18 күн бұрын
What a cool truck 🤘
@Mr.jfrancis
@Mr.jfrancis 18 күн бұрын
Mann that thing is clean! I love me a mini truck especially a drift build!
@Bigwayne6682
@Bigwayne6682 19 күн бұрын
Nice channel my friend subscribe 👍
@Chevy_Mafia
@Chevy_Mafia 23 күн бұрын
I’m about to do up my 5.3 BTR cam and springs ported heads jeg intake S&B intake and long tubes tryna get close to 400 wheel but after seeing this I won’t even be close
@jacobhardeman6869
@jacobhardeman6869 23 күн бұрын
Where did you stick the gps?
@semperfi1566
@semperfi1566 24 күн бұрын
Can you post the link
@monstersquashracing
@monstersquashracing 26 күн бұрын
Awesome man I never thought to do this and its cost me so much energy
@DGGarage
@DGGarage 26 күн бұрын
@@monstersquashracing yeah I got tired of taking everything to the press.
@marsqueenmarlene
@marsqueenmarlene 26 күн бұрын
that's pretty neat! 😊
@user-ev8kc9jg5g
@user-ev8kc9jg5g 27 күн бұрын
I'm having issues with it, there is only one cable that goes into every single port individually so it's not hard, the buttons work but the screen never turns on, this is my second radio doing the same thing, could a fuse cause this?
@theoriginalJTG
@theoriginalJTG 27 күн бұрын
Do the steering wheel controls work?
@nickabbott2000
@nickabbott2000 28 күн бұрын
Hope this helps me!!!
@DGGarage
@DGGarage 28 күн бұрын
@@nickabbott2000 I have faith!🙏
@emilybogart1268
@emilybogart1268 28 күн бұрын
I’m in need of wiring help with my same system, can you give me a few pointers ?
@macvadio
@macvadio Ай бұрын
Appears ref took early retirement option after the hit
@allenrodgers1908
@allenrodgers1908 Ай бұрын
I would run a 3.73 rear gear not a 4.56 you will hate highway speeds
@DGGarage
@DGGarage Ай бұрын
@@allenrodgers1908 4.56 is fine with the 33 inch tall tire it has. It drives great at 75-80 on the highway
@PH-x
@PH-x Ай бұрын
Burnt-out engines im picking😂
@familyengineering5591
@familyengineering5591 Ай бұрын
$1500 i know what i got
@huntergambrell1486
@huntergambrell1486 Ай бұрын
I’m so glad I found this video after weeks of nothing but actuator fixes and resets it lead me to the real problem of a broken door. Don’t want to drop the whole hvac just yet so drilled a hole and pushed it door shoot and used a plastic grommets to plug the hole!
@kianvenables9205
@kianvenables9205 Ай бұрын
You completely skipped all the wiring, almost a completely useless video
@cartispercs4804
@cartispercs4804 Ай бұрын
Do you have a link to the corsa exhaust?
@millerbing3756
@millerbing3756 Ай бұрын
Do you know where I can get mines done?
@user-cg4bn5dq4m
@user-cg4bn5dq4m Ай бұрын
And remember kids, bigger gears are only worth it if your can can hook
@jalenlehman6769
@jalenlehman6769 Ай бұрын
Does this come with apple CarPlay and android auto
@mxbub7109
@mxbub7109 Ай бұрын
Literally the only video I’ve been able to find where the door it’s self is the problem and not the actuator. Does anyone know what size screws to use when reinstalling?
@thomasmosley136
@thomasmosley136 Ай бұрын
How much did he charge to tune it? I work down the road from there
@DGGarage
@DGGarage Ай бұрын
I am good friends with him so he doesn’t charge me anything but call the shop and mention me and he will hook you up
@thomasmosley136
@thomasmosley136 Ай бұрын
@@DGGarage awesome man I appreciate it!!!!