Badon-Kad Onk

Пікірлер

@marktemplin1159 Ай бұрын

Remember ohms law,,,, you keeping under 1.5 amps, but doubleing the voltage, so do some math, what is your wattage 🤔 be careful when playing with high voltage

@combycat Ай бұрын

Thanks to styropyro, I now know how a plasma globe works!

@loganbailey9145 2 ай бұрын

I accidentally over powered mine because it’s batteries were running out so it started to stop responding to my finger so I was like hay what happens if I just plug it in so I found a plug plugged it in then it got wham and smelled strange when I put my finger on it so I unplugged it and the plasma ball is 6 volts and I plugged it 12 volts and I don’t know how many amps I’m never doing that again that’s why I looked for a video it made a weird smell from the ball to and left it on my finger 😐

@KeenanGT Ай бұрын

I had a similar situation, I lost the USB charger for mine and found a TV plug which fit the plasma ball. Within 10 seconds of turning it on and touching it, smoke started to come out of where it was plugged in, if i left it any longer it probably would have set on fire 😅

@Nic-ql8dk 2 ай бұрын

Bros trying to brake the univrse

@EmilSaloheimo 2 ай бұрын

Voltage and current does not work like that. The laptop charger doesn't "give" more amperage. If something draws, for example, 1.5 amp at 19 volts, it will always draw 1.5 amp at 19 volts even if you power it with something that could give like 50 amps.

@user-ml3sz3mm5y 2 ай бұрын

I tried this at home and fried my plasma globe at measly 14 volts :) Now, a few rounds of tinkering later, it can take 10 times the power it could originally without blowing up, and runs at 3x rated power indefinitely. For more of that it'll need active cooling, but for now a large heatsink on the MOSFET and a bunch of holes I've drilled into the base work alright. It now has an older, more robust circuit tho, and the low-voltage side if it is stabilized at 6 volts. The newer stuff burns up way easier, the original board got its brains fried too. At least the flyback transformer is okay, so I can use it later :)

@hiramortiz4103 3 ай бұрын

Can you feel it at all?

@badon-kadonk4550 3 ай бұрын

Yes. When the lightning strikes your fingers there's a gentle "tap" on the glass.

@redstonecommander5190 3 ай бұрын

I see what you need to add to your collection is a bill, Parker plasma globe to add to your collection

@redstonecommander5190 3 ай бұрын

4:24 OOOOOOWWWW I’m really not lying to you about that ear piercing frequency sound………. That really hurt………. A lot.

@combycat Ай бұрын

No offence to him, but he may not even be able to hear it while editing.

@AllLoudNation365 3 ай бұрын

You're lucky. I wish I had those

@AllLoudNation365 3 ай бұрын

I need these! ❤

@redstonecommander5190 3 ай бұрын

Heck, can you imagine company even made a light bulb clock with a plasma lamp surrounding it?

@redstonecommander5190 3 ай бұрын

Most of those lumin glas a.k.a. plasma discs were usually made and manufactured by a company called. Can you imagine can you imagine also not just make plasma apps they also make other devices such as same marble, run clock, optical, illusion, decor, and other novelties.

@redstonecommander5190 3 ай бұрын

2:47 now those are cool as heck

@redstonecommander5190 3 ай бұрын

7:37 that was very disrespectful….. I would not buy that and have that part of my collection

@badon-kadonk4550 3 ай бұрын

This particular lamp is modeled after the Venus de Milo or Aphrodite of Melos, an ancient Greek marble sculpture that was created during the Hellenistic period. It was rediscovered in 1820 on the island of Milos, Greece, and has been displayed at the Louvre Museum since 1821. I'd say that I demonstrated its reaction to touch very respectfully. Now if you don't mind, please keep your judgments to yourself.

@redstonecommander5190 3 ай бұрын

Alright sorry it is just the fact that I do not like inappropriate stuff like that

@kathywisniewski862 4 ай бұрын

Bro was making a whole universe 💀

@SineCalvin9 4 ай бұрын

Whoa... I've been wanting this model for a long time. Very cool.

@Ricardoelpr356 4 ай бұрын

That start remimd me to Merg

@UnhappyOFF 4 ай бұрын

What happened is the plasma where it made its way down through the black stick thing that you see and it made its way down into the components overtime because the fact that you over volted it and the plasma made its way down to some important components and then fried it when it hit it so that’s why you don’t wanna put it up so high not because it’s gonna use up all the gas but because of the fact that it’s going to make its way down overtime and you basically just made something that would take usually years for that to happen, and then eventually destroy the plasma. Globe to happen in six minutes.😂

@user-ml3sz3mm5y 2 ай бұрын

Nope. The transistor just overheated, that's all.

@lightsaber9590 4 ай бұрын

thank you so much, this video changed my life. I was finally able to leave my husband and kids. praise satan!

@kylertrudell 3 ай бұрын

oh hell no

@greetedpig 5 ай бұрын

BUT YOU DIDNT HAVE TO CUT ME OFF

@greenfun131 5 ай бұрын

Impressive and beautiful collection! Which ones would you say are the most high quality? I was looking at the Aurora Genesis Jr. Pro, which I think is the one at 11:46? Looks like yours really slowed down as it aged? Thanks in advance!

@badon-kadonk4550 5 ай бұрын

Thank you! The Aurora Plasma Design globes are definitely the highest quality. Anything vintage will be better than today's store bought models so check eBay or similar apps. Realistic, Rabbit Systems, Can you Imagine and Lumisource are all quality brands. The Genesis Jr. Pro definitely changed the most over time. Looks more like green fire now. I've increased my collection since this video, so check out my channel to see more! New videos to come soon!

@greenfun131 5 ай бұрын

@badon-kadonk4550 thanks for the reply! Before coming across your video I was set on the Genesis Jr., but now I'm questioning if I should go with the Tyrian Purple or Phoenix Rising instead. Don't get me wrong, yours still looks super cool, but almost more of a beautiful glow VS an impressive electrical display. What I need to is figure out where I can display all 3 of them! hahah I didn't notice any dimensions listed on their website for the Jr's. Obviously it's an 8" ball, but what is the overall height of them? Can't wait to see your updated collection! Thanks again!!

@badon-kadonk4550 5 ай бұрын

The Jr. Pro series stand 12" tall. The Tyrian Purple is a combination of pink, purple and coral. The Phenix Rising is a deep red and pure white. All move and dance with their own personalities. The biggest challenge is definitely finding space and power outlets. Haha

@xMADx532 5 ай бұрын

cool

@user-yg6cq2xm3r 6 ай бұрын

ma a togliere la sfera si riesce a cuocere la pasta avvicinandolo alla pentola?. e' per un amico.🤣😂

@cdub1393 8 ай бұрын

Omg im so jealous 😂 i love your room.

@cdub1393 8 ай бұрын

I'm planning on buying a radio shack lightning storm or a Realistic illuma storm. Can you give me a opinion on which one you like more. And why? Are they both very similar?

@badon-kadonk4550 8 ай бұрын

The illumastorm would be cheaper and have variable sound sensitivity, power and frequency controls allowing you to get different patterns. The lightning storm has variable power control but they tend to just jump right up to full power when you turn them on. Mine gets pretty hot. They also have sound sensitivity control. The lightning FURY however is a dome like the lightning storm but has good working variable power and frequency controls. No sound sensitivity mode on the lightning fury though. I hope that helps.

@DerUnrasierte 8 ай бұрын

Whats the price range from low to high? They look much more funky and trippy then the standarts

@badon-kadonk4550 8 ай бұрын

Between $50-$200 in that video. The collection has grown since then.

@elcocoleo 10 ай бұрын

my ears😭👂🏼🩸

@ChrisK.-ch3yq 10 ай бұрын

Wow what a nice collection i like the Zombie Brain the most where was somthing like that avalible?

@badon-kadonk4550 10 ай бұрын

Thanks. The lumisource Lobotomy can be found on ebay.

@allenmeyer2912 Жыл бұрын

Promo>SM

@Purple431 Жыл бұрын

Awesome!!

@b_tssl Жыл бұрын

💯💯

@zenovuh Жыл бұрын

Now put it max near a working Bluetooth device

@towcat Жыл бұрын

Hello future algorithm visitors Today's menu includes an adorable science kitty

@emberspeedruns430 Жыл бұрын

Its like a small universe

@Purple431 Жыл бұрын

Awww

@BerryKind Жыл бұрын

Damn. That high pitched noise. 😢

@LassieFarm Жыл бұрын

1.21 gigawatts 😳

@Purple431 Жыл бұрын

How do you have sooooooo much? I bet those cost like hundreds altogether

@badon-kadonk4550 Жыл бұрын

Thousands $. Got them from Aurora Plasma Design, Radio Shack, Spencer Gifts, Ebay, Mercari and Etsy. I'd search KZfaq and Google for every kind of plasma ball that has ever existed and when I discover ones I like I save a search term for them on the online shopping apps. Most are pretty rare so about once every couple weeks I get a notification that one I've been looking for has been listed. Then I just bid on it. Thank you for supporting my channel btw. I truly appreciate it !!!

@Purple431 Жыл бұрын

You're welcome! I was also thinking about making my own (not the one that I made last summer). I could get a large round-bottom flask and fill it with my own gases like neon and xenon or krypton... and use my flyback driver or a commercial one from and old and broken globe. I may or may not do it but I'm hoping to. btw I really like the 2 pieces from RadioShack! Very pretty, rare, vintage and expensive ^^

@badon-kadonk4550 Жыл бұрын

I think that's an awesome idea to use a round bottom flask! You could position the electrode up inside with a long test tube or just electrify the gasses from the bottom. I would guess that the most expensive part of your project would be sourcing the gasses.

@Purple431 Жыл бұрын

Yeah, especially krypton and xenon... they are the most expensive of the 3 I would like to use. For now though, I'm gonna try and get a RadioShack globe from eBay. If I do, then I may do a review or maybe a teardown, (I don't want to reck it cuz y'know... vintage, rare and expensive). Plus I also have a drawing that I did like 2 yrs ago about a RadioShack globe from the 80s, and may show it too lol

@dimitriskatsikeros8210 11 ай бұрын

@@badon-kadonk4550you should get way mire but do not play them too much😊

@JeffreyAllanBackowski Жыл бұрын

I'd buy one of those Radio Shack Lightning ones, lol, if Radio Shack existed.

@badon-kadonk4550 Жыл бұрын

There are actually several on ebay ranging from $115 to $300. Search "radio shack lightning storm", these ones have adjustable power and sound sensitivity. For domes with adjustable power and frequency control search "lightning fury", "white lightning" or "hailstorm". The "lightning 2000" only has adjustable power. I hope you find one you like!

@JeffreyAllanBackowski Жыл бұрын

@@badon-kadonk4550 are they all used?

@badon-kadonk4550 Жыл бұрын

It looks like there is 1 marked NEW IN BOX for $249. www.ebay.com/itm/295503064134?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=Uk-sXYmYQkO&sssrc=2349624&ssuid=LXODVmv0R5C&var=&widget_ver=artemis&media=COPY

@general1977 Жыл бұрын

Cranking up the voltage without also cranking up amperage is nothing a power supply could control. It may have a limiting function, where the voltage doesn't rise any higher, when a certein current is exceeded, but that is all the power supply can do. You cannot control current with a power supply. It is a direct function ov voltage.

@KlodFather 4 ай бұрын

I have bench/lab power supplies that will. You can set them to keep it under whatever current you set it at... but if there is a short or out of spec load, the voltage will drop because ohms law cannot be broken. But be sure that those supplies and circuits exist that are called constant current supplies just as many power supplies out there are made to be constant voltage.

@infn8loopmusic 4 ай бұрын

Right. Isn't it basically the amperage is drawn out based on the resistance in the circuit. So you can overload the supply into the resistors with higher voltage and with more amperage available but that only leads to damaging the resistors inside. Realistically if it's AC power you might be better off doubling cycles in Hz evenly. And reducing the resistance inside the unit.

@KlodFather 4 ай бұрын

@@infn8loopmusic - What those plasma balls are doing with the AC input is to rectify it and filter it with a cap for smooth DC. Then they will have transistors oscillating into a coil of some sort with a very high tension secondary similar to a flyback in a TV. TV high voltage is 15 kc or so and gets really efficient transfer with little iron. Many ultrasonic cleaners do the same thing between 35 and 60 kcs. Line power is 60hz and would require HUGE iron to step it up to plasma ball voltages. That is why you can power these with DC because the DC adapters just go straight through the diode bridge past the filter cap and the globe fires right up. The input impedance would be increased if you were feeding a step up transformer directly but a large iron transformer made for 60hz will not like that very much and will fight the high frequency AC. That stuff always works on inverses. There are some good videos here on YT about that kind of circuit analysis and some good books illustrating those concept and their math.

@EmilSaloheimo 2 ай бұрын

@@KlodFather I'm sorry, but I think you need to read a bit more on how voltage and current works. You can't limit the current and still have the same voltage. If you hit the current limiter the voltage will always drop so that the current doesn't exceed the chosen value. It's impossible for the same load to draw a different amount of current at the same voltage.

@KlodFather 2 ай бұрын

@@EmilSaloheimo - You should go back and read what I wrote carefully. I said exactly what you are saying in my previous post "but if there is a short or out of spec load, the voltage will drop because ohms law cannot be broken." You should read more carefuly before making a false assertion and being too smart by half.