Hey...good overview...what do you use for the camera and mic...they're perfect

I have a 2020 TRD Off Road Premium and my DRL aren't working no more. I can turn it to parking lights and the lights come on but when I switch it to DRL mode they don't come on. I'm wondering if this is the issue

Are Furious’ bikes and or batteries UL approved?

The bonus test did not work

You shouldn't use the stairs. It funnels sound. A larger room at 10' and 20' intervals.

Just a suggestion... you definitely need to trim the fender, remove it completely, or move the roller pin down on the hold down bracket to get it off the fender and contacting the tires. This needs to be be done on the last bike even more so bacause you are contacting the front fork with the bracket on the tire hold downs. You'll not only scratch the heck out of your bike but the beautiful new bike rack you just spent good $$$ on! Great video and thanks for posting! 😊👍

Bro this is me AF rn 😅

I have a JLT intake series 2 on my rt and for some reason my covers won’t fit !

I wish i could get a wired bike but i understand that they do not ship to Canada , 😢

This does not work on a 2020 Charger Scat Pack. I tried both top corners

Nice,do you have the link for the clips??

How do you remove the hoses from pvc

I also preordered the Road Warrior Ultimate AWD 60v. My question is that bike waterproof or snowproof? I want an ebike for everyday use that can last for years.

Well, I just ordered the lime green Wired Cruiser ebike. You're never going to have the perfect bike, as long as you have speed, power and range, at a decent price, you're good. Enjoy it, it's not the end of the world.

Can't you splice the rear wire battery with a cut off switch?

24" tire with cement gray color frame. AWD 1000 in the rear and 750 in the front with the ability to use both at the same time or independently.

On the last bike and the 1st one I think you should have moved the roller onto the tire. On the 1st bike you could have moved it down and off of the fender and the last bike looked like it was on the fork in the front. Thanks for creating the video

The brand is still Fabulous..."Furious" is one of their lines of ebikes. It's the Fabulous Furious line.

Very informative and helpful as I was looking for long time for my akaso brave 7! If u find any soldiering solution make a video! Thanks 😍

who would you say the cruiser would be for?.. and is the extra weight of 100 lbs a lot to handle?

How the heck do you get the new one back on. We’ve spent about 4 hours trying to get the new PCM plugged in and we cannot get it

The good news is you were off a few years. I made the mistake of buying a Ford Bronco that caused me to dump Ford after 32 years and happy to jump on the last year ('24) of Made in Japan 100% and also old school platform. Proud owner of a 2024 4Runner TRD Off Road. I like the fact it's a 4.0L V-6 simple adn reliable engine, a 15+ year old platform that is tried and true.

Thanks bro, I was about to pull back the bumper too far and ruin the thing, but your video showed I need to go two steps back to go one step forward. You saved me the $85 I just paid for the black valance.

Thanks for everyone recommending the hot soapy water method, it worked easy, but this was after I realized the KEY is water should smoking hot almost boiling! If you can’t feel the rubber able to move the water isn’t hot enough! go back and make hotter , if not your wasting time and won’t work..and I used no other tools.. mission MF accomplished!

Looks like the front bumper sensor bracket has 1 10mm screw that will remove the whole thing?

Shit don't work for me

I’ve been searching for a wireless mic for Akaso.

I will never use that trash again. My first e-bike came with pre-slimed tubes from the factory... That completely disbalanced the wheels so the whole bike would throb up and down at speed. I didn't make the connection in time... Another e-bike I have, was perfectly balanced. I could lift the rear wheel and blip the throttle up to 30 mph... The bike was steady as could be. After placing just 6 oz in a 4x26-in fat tire the whole bike shook uncontrollably. Never again. I would rather just buy another tube or bring another one with me. That is absolute garbage.

Just placed my pre order for the Road Warrior Ultimate AWD 60v! Can't wait!!!

I'm so glad I found this video. Just now was the 4th time in 4 months my screen went blank except for a tiny horizontal line. Before this I was pulling out a fuse and putting it back in. To fix my problem all I had to do was your first step, turn the car to run without starting it. After a few seconds poof all fixed.

And I wouldn't mind a 72v version...

I have the updated Cruiser on order. Here is what I'd want 1. bigger headlight 2. better color variety and some stripe or something 3. carbon frame 4. 26x3 (not 4") street tires 5. cruiser styled handlebars

Link doesn't work

First off, I apologize for the wind blown audio. Check out www.kingbullbike.com Coupon code: RYDIN200 for $200 off (limit 5) or RYDIN50 for $50 off. Watch this video next: kzfaq.info/get/bejne/nMqloLuZvpvaqWw.htmlsi=ghFR1zlXN_4a7ZKc

I’ve never done this myself. But for anyone watching this to help them install their own meso custom lights I recommend you watch other videos also. Most videos do not mention the necessity to remove the silver reflective piece.

Sometimes there are metal burs left on the interior of the rim that causes flats. I had a bike i would get a flat and go for a ride after and get another flat. Poor quality control is the issue.

The best sealant to put in your bike tires before you get a flat is FlatOut because it's just the best hands down and trust me it works. I've been using this sealant for years in all of my tires and there's been no more flats for me since. Riding my bike, driving my car around New York City sketchy streets and this FlatOut prevents me from getting any more flat tires again.

It better be sturdy when it cost 1250 for two bikes!

That crap is nearly impossible to clean out. Tire guys hate it!

I add slime to every tubed tire when I get something and never had a flat… I cracked the aluminum rim on my electric unicycle and road it 20miles home because of slim it’s worth the mess it makes.

Okay, Kenda's are good tires.

You should have patched the tube first, then added the slime...

I use a motorcycle lift when I have to work on the wheels of my Recumbent Ebike. Works great.

I am a trained bicycle mechanic. I've been working on bikes since the early 80's. And as a Mechanic, I HATE slime, its gets every where. I new use something called STANS Tire Sealant. Its primarily used with Tubeless tires. But works great. So much better then slime, when used in a tube.

I can't find a basket to fit that mount anywhere

you need to change those tyres thay are puncher easy tyres.i changed my tires for Allscape tyres much better with slime added and no more punchers into 3 years use.

I'm going to use to try to fix my e-bike, I just bought the Like-Bike seeker S, and like the Titanic, its maiden voyage was today and a "torito" as we call them in Spanish, (I don't know what they are in English, they're these tiny spiky things that grow from some bushes and cacti here in the south) got lodged in the tire and immediately deflated it. My usual go-to fix is duck taping the tube where it got punctured but I'm going to check out this slime, its 160$ Pesos (like 10 USD). Great video, thank you

My rear tire also had a small staple in it

Way to show when you actually mounted the catch can and hoses lol

Watch this video next: kzfaq.info/get/bejne/f5ykZrGl3bqchYU.htmlsi=B8dURwhyZn0l1lq7