Andrew Murtagh

Пікірлер

@jvdzgames1914 Жыл бұрын

Hey i tried the tutorial and it worked but i just got a lot of new fixtures and the open dmx interface is having trouble with so many fixtures so i was planning to buy a enntec dmx pro adapter but when i select that interface and i restart the software it just would not save it and i dont know if its gonna work because i want to know if it will still work before i buy the interface

@D4NS80 Жыл бұрын

You can rename the interface in adapter settings in your PC, so if you name it DMX Loopback it will show in MA2 as DMX Loopback

@glenmorewolseley8846 Жыл бұрын

hi i need help not getting my concole to work with my pc

@travisminneapolis Жыл бұрын

Can you please share with us how to do MA2 on PC with this setup?

@YoungDjservices Жыл бұрын

You need MA hardware to unlock paramaters for MA2, you could however buy an MA3 vis key and have paramters unlocked in mode3

@Nico-so4nh 2 жыл бұрын

yeah, you save my life today!!

@HekticGaming 2 жыл бұрын

awesome video thank you for the information and review good sir. do these leak sound when recording vocals?

@lokmanjl9272 2 жыл бұрын

Can i know how to connect usb interface dmx to avolites titan control lighting

@ld_deiola 2 жыл бұрын

Hi Andrew, I would like to know if you can drive with the same technique how many dmx universes and if you have tried the dmx universes in artnet thanks

@YoungDjservices Жыл бұрын

Unfortunatly only 1 universe without dot2 hardware.

@suhailk9342 3 жыл бұрын

Hie bro i just checked it with usb to rs 485 module and the output is good But i have braking my signal output in every 5minutes. But it can connect after restarting my system Can you have any solution for it

@sirwhollyburgeriii8291 3 жыл бұрын

AYO THIS SLAPS

@TheGV369 4 жыл бұрын

Fresh Prince if it aired in the 70s

@afolabisamuel5884 4 жыл бұрын

Hey... Nice one, can this be done with Resolume

@YoungDjservices Жыл бұрын

yep

@dinniemobson728 4 жыл бұрын

I DIDNT KNOW HOW MUVH I NEEDED THIS

@RyanMoodGAMING 4 жыл бұрын

That video for grandMa2 at the end, did it ever get released?

@sebichedj 4 жыл бұрын

Thanks bro, I have tried with grandma2 and it works perfectly

@afolabisamuel5884 4 жыл бұрын

Pls enlighten me, how did you do it?

@aesono 4 жыл бұрын

Don't work and I don't know why =/ Thanks for this video

@TheRobertCostello 4 жыл бұрын

Will it work with the Grandma3 software?

@lemontree15 3 жыл бұрын

No, only dot2 gives you a free universe

@leopoldnaessens1171 4 жыл бұрын

Works like a charm. DmxIs user can follow your steps, also using to use dmx drivers in art to dmx. as simple as that. Thanks Andrew!

@Jongrobin 4 жыл бұрын

I don't get a signal out of my enttec open dmx. You might be lucky

@TheRealCrayfishin 4 жыл бұрын

why do you click so hard

@stephensmith5514 4 жыл бұрын

I have everything set up and is receiving Art Net but not DMX, any thoughts?

@afolabisamuel5884 4 жыл бұрын

Hey mehn... Thanks for this video. Will this procedures work with an Entecc DMX USB PRO?

@kondibetz8082 5 жыл бұрын

is there a way to do this with Mac?

@captainawesomedude1 4 жыл бұрын

Considering that MA onPC doesn't exist for Mac? No

@kondibetz8082 4 жыл бұрын

@@captainawesomedude1 no, there is dot2 for Mac, but no freestlyer (at least I didn't find it on the internet)

@sHOvelo 5 жыл бұрын

art net to dmx says: art net not detected. what do i do?

@vincentjacobs6774 5 жыл бұрын

really great and informativ Video I would ever racoment.

@CaeSharp 4 жыл бұрын

great vid, i too would recum

@abecoulter18 5 жыл бұрын

How easy is it to learn......easy to get going? Can I use my APC40 mkii?

@abecoulter18 5 жыл бұрын

Will it work on any USB to Dmx device

@normotoryjazz6446 5 жыл бұрын

No. It will only work with the cheap ones that use free styler. This is a good thing cause other dmx device cost 50-3000 dollars as these cheap ones cost around 2-10 dollars.

@LorcanWall 5 жыл бұрын

will this work with ma2 onpc?

@normotoryjazz6446 5 жыл бұрын

From what I can tell yes! As you can see in the video this way uses art net. Art net is used in most consoles if not all (except for not digital). Now if you do the same thing and go into protocals on MA2 you should see the same thing. Hope this helped. -jazz productions.

@veranstaltungstechnikag4011 5 жыл бұрын

Hey Is it possible to connect 2 Univeres with 2 Adapters?

@normotoryjazz6446 5 жыл бұрын

Correct me if I am wrong but I believe if you have a splitter it will give you 2 universes.

4 жыл бұрын

@@normotoryjazz6446 In case you mean DMX splitter, then no. You will just have 2 times the first Universe.

@roniknuutila9639 5 жыл бұрын

hey cool tutorial! so can this be done with grandMA2 onPC as well? would like to see a tutorial on that

@normotoryjazz6446 5 жыл бұрын

@spawnproductions 5 жыл бұрын

It will work with MA2 onPC as long as you have one of the onPC hardware devices connected, but at that point, all of their hardware that would work already has DMX outs on it. MA2 onPC does not give you a free universe like dot2.

@MortgagesMike 4 жыл бұрын

@@normotoryjazz6446 No it does not work.

@rudyberezin8992 5 жыл бұрын

Hi Andrew, First of all great video mate! would love to get in touch with you to inquire regarding that Ma2 to enttec dmx box communication solution for an under budgeted non commercial project I am working on right now. [email protected]

@BNBTutorialforSoundSystem 5 жыл бұрын

Hi Bro, thank you very much for this imformative video, have you already posted video for GrandMAonPC?

@normotoryjazz6446 5 жыл бұрын

@maxwelllighitngtutorials5681 5 жыл бұрын

Can you do it to grandMA too

@JBF-GST-Tanda 2 ай бұрын

All universes on MA2onPC is forbidden to be output via Artnet unless a wing, a node, an NPU or a console is connected to the computer. It's said that some hackers successfully created some sort of "unlocker" which emulates an MA NSP and subsequently "cheats" MA2onPC to send out Artnet signals, but I can't find any.

@jounalansman1769 5 жыл бұрын

Is it possible to get this to work with the Enttec Pro Dmx Usb range?

@captainawesomedude1 4 жыл бұрын

yes

@KI5QMT 3 жыл бұрын

@@captainawesomedude1 how I cant get the software to output and it doesnt even show the artnet being detected

@GRabie01 5 жыл бұрын

Verry nice, worked fine for me!

@bastianschendel1077 5 жыл бұрын

Don´t hit the mouse so hard

@LittleZdy 5 жыл бұрын

Thanks !!

@Wareitar 5 жыл бұрын

Huh, an actual usefukl video! Good one! Worked like a charm and did exactly what it's supposed to.

@bigzoerayy 5 жыл бұрын

The Fresh Prince of The Jackson 5

@xontinuity 5 жыл бұрын

How did you mount the color bars like that? Do you have two stands?

@AmlLighting 5 жыл бұрын

artnet到dmx哪里可以下载？你可以给我发电子邮件吗？971348025 @ qq，

@isaiahcaines5718 6 жыл бұрын

@alexmac662 6 жыл бұрын

Still busy?!

@alexbirch1610 6 жыл бұрын

when are you going to do your ma 2 open dmx video

@katedrascenografiedfvsmu8701 6 жыл бұрын

Not working.

@keithmotty1 6 жыл бұрын

Good looking gig,,,, but young people still don't seem to see the dangers of pointing strong lasers into the crowd..

@hwanii_4366 6 жыл бұрын

Will this working with enttec pro mk2?? only pro & open dmx?

@normotoryjazz6446 5 жыл бұрын

Yes.

@lecolectioneurdespro 6 жыл бұрын

Hey Guy! Thanks for the vidéo! I make a video about the same subject too, for my french friends, So I talk about you, and I put the link of your video in the description! :D because it’s like a translation copy and I think you must ne advert about my video :)

@sebastianmartinez-co5zc 6 жыл бұрын

help me! My ARTNET still in 0.0.0.0 i have configured the loopback 13.13.13.13

@aidanpratt 4 жыл бұрын

I Figured out how to fix this issue. use the command in the dot2 command line "SetIP "Microsoft KM-TEST Loopback Adap (Ethernet 2)" 13.13.13.13" You may also want to set the ip to 2.13.13.13

Ең жақсы KZfaq

Пікірлер