I bought these tires and they hold up well. They throw a lot of rocks when on gravel but overall have a smoothe ride and Costco had them on sale
@stevenschmeevan636414 күн бұрын
Came to see the water pump but impressed by your camera lens. That is no phone camera.
@1minibean14 күн бұрын
GoPro Hero 7
@ryanpalmer681624 күн бұрын
Just curious why you think this is better than a mid mount mower?
@1minibean23 күн бұрын
For my property its best with all the tree hanging low, I can back up under them. Secondly, It’s a bear to remove a belly mower from this machine as I use the tractor for other things I need clearance for underneath. If I was only mowing, I would have got the belly mower and just trimmed all my trees.
@Seahunter82025 күн бұрын
Beautiful, Great Job I just bought an LX2620 like yours. It will be delivered first of next week. Please list what coating products you used so I can make mine look that good. Is it Ceramic? New to me, Thanks
@1minibean25 күн бұрын
If you want a first time great coating, get your self a 30ml bottle of : Car Pro UK 3.0 ceramic coating. You can actually get this through Amazon very quickly.
@1minibean25 күн бұрын
Wash it first with Dawn dish soap. Leaf blow it dry.
@carbon658729 күн бұрын
We can all see the love that went into this. Very nice job and you enjoy the Z06!
@grantduong6149Ай бұрын
is the module a different one or was it rebuilt. I heard something about programming the module after replacing. I’m planning on getting a module replacement from another car. Do you have to program it?
@1minibeanАй бұрын
No reprogramming- new module
@TheMickeymentalАй бұрын
I tried your fix without success. I went to the local Authorized Honda Power Equipment service center and was told it was most likely fuel tank debris had fouled the carburetor. Thank you for the video.
@PetersonFarmsofNashvillePFONАй бұрын
Nice Rig I love my Finish Mower as well it cuts better than my zero Turn 👍
@1minibeanАй бұрын
For our property the finish mower was the right choice, and does a nice job too.
@cusoonmyfriend3738Ай бұрын
hello, i can get one gx120 for 150 euros, good deal ?
@exisfohdr3904Ай бұрын
This is a far too frequently occuring problem with hondas. ABS module failures. It really should be a recall. Now 2024, and the honda dealership cost is up to $2,000+ to replace the entire module not just the broken computer. They will not replace just the computer. There is an online service you can ship your computer to that will refurbish it for $200-250. If you don't mind cracking open a glued/sonic welded plastic case and doing so solder work yourself, you can possibly do the repair for less than $100. Typical problem is the shotty wires they used to connect the harness co nector pins to the circuit board. I cut mine open with a dremel and found 4 wires that were completely disconnected. I removed all of the original wires and doldered in thicker copper wires for every pin. Glued the cover back on and sealed with heat resistant tape. Plugged it in and it work just fine. All the panel lights wwnt away. Had to get a friend who has a $4,000 scanner to clear the abs/vsa codes.
@skyepilotte11Ай бұрын
What a jewel of a Tiger...ceramic expertly applied turned it into an unbelievable beutiful. Nice work.
@lcee6592Ай бұрын
Nice rig! The cut looks pretty good too! I would recommend removing the front loader when mowing. Much less chance hitting something and less weight on the front axle while doing maneuvering. 👍
@1minibeanАй бұрын
The extra weight in from seems to be a good balance with the rear finish mower. I will try with the loader off one day.
@lcee6592Ай бұрын
@@1minibean Yes give it try without and even just the bucket removed might be a good compromise. Maybe airing down the front tires a few pounds could help with turning. Just remember to air back up if your going to do loader work.
@davidnelson4707Ай бұрын
very nice , my 170 needs that so when would you like to start?
@1minibeanАй бұрын
Fly it over to Saratoga and we’ll get it done ! Or fly me to your hangar and I’ll do it there.
@1minibeanАй бұрын
Just finished this Tiger Sunday. kzfaq.info/get/bejne/ptB1pqievcXDYnU.htmlsi=RKfGXzcY1mdjsCpS
@davidnelson4707Ай бұрын
@@1minibean my hangar is in australia . but thank you for the offer
@snickypicky5273Ай бұрын
Nice! I’ve got a bx and I’m debating skipping the b01 and just getting an LX20
@1minibeanАй бұрын
I almost got the B, it’s an awesome machine.
@UntamedPNWАй бұрын
Did the tires affect your MPG? How are they holding up now?
@1minibeanАй бұрын
Minimum if not not at all on the mpg. I’ll do another video soon on the follow up. I’ve put 18k on them and they are like NEW.
@UntamedPNWАй бұрын
@@1minibean this is exact the information I needed. About to re tire my 17 crew max. Most A/T tires take away 2 MPG and are heavier. This seems like a good option since its a light truck tire.
@UntamedPNWАй бұрын
Would you still pick this tire over the Ko2 or falken wildpeak ?
@richardtrammell7521Ай бұрын
Lmao😂
@Marine-iu3evАй бұрын
Are you planning to mow with it, or just for show?
@1minibeanАй бұрын
He mows with it. I just polished and coated it for him
@timd9430Ай бұрын
2024 $3000. HUGE BRAKE SAFETY ISSUE DUE TO FAULTY INTERNAL WIRING DESIGN OF ABS MODULE. FUCK HONDA. FUCK JB.
@coolman2k2Ай бұрын
sounds like everyone wants a recall or some sort of compensation.. i need to see action not just words lets get this thing moving #recallthesecars
@AAE-cg1il2 ай бұрын
That sound people get from the Solas Amita 3 aluminum prop is not harmful. It’s called prop singing……The manufacturer can eliminate it by beveling the trailing edge of the blades but they probably won’t because it means paying for tooling again. Must have been a rookie engineer.
@1minibean2 ай бұрын
Thanks . It’s definitely a sound I would never be able to tolerate.
@AAE-cg1il2 ай бұрын
@@1minibean many say it spooks fish when trolling……..I had a Solas on my etec for all of 1 hr……it got promptly removed, reboxed, and returned. I then purchased the same spec prop from Evinrude……It’s night and day difference.
@CarlosRodriguez-hw3nt2 ай бұрын
Bacano.
@1minibean2 ай бұрын
Gracias Sénior
@ThePatrickwilley2 ай бұрын
Factory 11 pitch prop? I've got a 14' Meyers jon and I just ordered a df25a, I bought 3 different props to see which works best for me
@1minibean2 ай бұрын
I bought a solas 12 pitch and it was terrible. I made a video on the squeal it made on my engine consistently. I also got the best performance with the factory 11 pitch. It will hall ass on that Jon boat.
@MrMharley2 ай бұрын
It’s been 2 years since your review on your tires , I have a 13 tundra with 180K I’m needing tires how are your tires holding up ?
@1minibean2 ай бұрын
I e got 16k on them. They are still 90 % like new. I’ll post another video this week.
@kevinmatzke22992 ай бұрын
Paint on John Deere is super thin be careful
@scottkramer4813 ай бұрын
Same thing happened to my 2006 Honda Pilot. I replaced a wire harness to the passenger side front wheel bearing. Part was about $20. That was 3 years ago and the lights have been off ever since then.
@Cocora223 ай бұрын
what did you use for polishing and finishing? I just bought an X540 used and I want to super detail it as soon as it get delivered. Looks fantastic!!!!!!!
@1minibean3 ай бұрын
If you use a high end polish you will have success. I used C Quartz to finish out on this machine.
@Cocora223 ай бұрын
@@1minibean Thank you!!!
@1979augistine3 ай бұрын
Easy to move with those wheels and its built like a brick shit house . Well done guy
@1minibean3 ай бұрын
Thanks - Yes it’s serves me well. Nice for around the house.
@PurpleCollarLife3 ай бұрын
Beautiful machine!
@greggatto40233 ай бұрын
PERFECTION! Looks amazing!
@tuffram21653 ай бұрын
Any update on your review of this tire? I'm about 6 months from needing a new set on my 21 F150
@1minibean3 ай бұрын
Still have even wear and still at 85 - 90 % life ! I have 20k on them now.
@khenotida7973 ай бұрын
Wow thats pretty powerful water pump.. the wb20xt version is not available in our area. Instead they have the WL20XH version, powered by gp160 engine. By the way what is the difference between the WB and WL version?
@kalhoon4 ай бұрын
Dial gages can be all over the place for gap
@marc.wrutgers67044 ай бұрын
Awesome Job congrats
@1minibean4 ай бұрын
Thank you ! Lots of work on this one.
@vb93004 ай бұрын
love them decals on the motor...where did you acquire them?
@1minibean4 ай бұрын
I got them from a decal maker out of Canada. A matching set. I’ll send you a link this weekend.
@vb93004 ай бұрын
@@1minibean that would be fantastic
@khenotida7974 ай бұрын
What is the oil capacity of that gx25 engine?
@1minibean4 ай бұрын
If I remember correctly , the instructions manual has that outlined in it. I think I filled mine until the BOTTOM of the threads on the filler port.
@khenotida7974 ай бұрын
@@1minibean thank you sir, im planning to get one for my small garden.
@@khenotida797 I recommend the other pump I sent you the link to. It’s only 80 dollars$ more, and more quiet.
@VinylTherapy4 ай бұрын
Thanks for the video. Just ordered one, should be here Monday. If it runs rough, the plug gap is the first thing I'll check. How has it worked for you after 3 years? Any issues? Thanks again.
@1minibean4 ай бұрын
💯 Flawless. Starts every time. It’s my go to.
@VinylTherapy4 ай бұрын
@@1minibean Good to hear, thanks again.
@khenotida7974 ай бұрын
Wow nice mini pump, what is the ideal pipe size for that pump, im just using it just to transfer water. About 50 to 60 meters in distance ( no elevation).
@1minibean4 ай бұрын
I have it adapted to 1 1/4 coming out of the pump. For 50 meters out I would stay with 1 inch discharge hose.
@khenotida7974 ай бұрын
@@1minibean thank you sir, so 1inch is the best pipe size for that pump. How about the flow rate on longer distance, is it good for that mini pump?
@1minibean4 ай бұрын
@@khenotida797it’s not bad at all. Just has a small fuel tank is the only downside
@khenotida7974 ай бұрын
@@1minibean thank you so much for your response sir, it helps me a lot on how to setup that pump correctly. God bless you.
@pansitaz245 ай бұрын
Does fit in any atv?
@1minibean5 ай бұрын
Yes, they are available for many models atv
@pansitaz245 ай бұрын
@@1minibean yours looks so cool.Thank you.Got me getting mine just now.Im new to Atvs so im modifying it.Taking all my stuff in mexico since its a Its an Italika Atv 250cc 2024.Thanks again for the help
@derellscott66955 ай бұрын
Soooo satisfying 😊
@ivareiriksson68335 ай бұрын
I had a honda before for 12 years, no problems. Now I have a generac 3200 inverter generator, Perfect.
@ivareiriksson68335 ай бұрын
I bought one overcharged very easily, change for another one, same. Garbage.
@minidiggerman5 ай бұрын
Thankyou Thankyou Thankyou !! One year on from you fantastic video you would have thought Yamaha would have fixed this issue but no joy I purchased a brand new generator yesterday 29/2/24 and it had the same issue. With your help it is now running fine cheers from Australia 🇦🇺
@saltyreviews18485 ай бұрын
what a blessing to what that experience! gift!
@edpedruczny24026 ай бұрын
It should have been a Honda recall. Very common, they go all the time. BS !
@1minibean6 ай бұрын
Agreed. And still is an issue.
@mmayorga26 ай бұрын
Looking at new tires for my 2015 Silverado 1500 Z71. So tired of KO2’s. They are rough, noisy, and hard to keep balanced. I do more hwy than off road these days but I do pull a bay boat quite a bit. I went to look at the AT2’s today and saw the XT’s. The store mgr says they are a great tire. That they are quiet and smooth. I feel like they are between a moderate and aggressive all terrain. They look great on the Tundra.
@1minibean6 ай бұрын
I’ve had good luck with them, 12k so far and still look and ride like new. I rotated them 3 times so far to keep them as healthy as possible. Tough tires with a nice ride.
@LucasLafortt6 ай бұрын
Brazil loves Makita, congratulations on the video, success
@trevorselch55746 ай бұрын
Where the headlight would be will blast air into your face like you dont have a windshield
@1minibean6 ай бұрын
That’s what I thought too, but never felt a thing really. Great wind Screen.
@marcaliventialiventi7657 ай бұрын
I put them on my 2018 Silverado Great in baby powder snow
@MrSchnickel7 ай бұрын
thanks very good info. well done
@anzaeria7 ай бұрын
It's well known that this kite has a tendency to dive. Do you reckon that the tail reduces the chance of it diving? Though I did see a partial dive at one point in the video.
@1minibean7 ай бұрын
I always use a tail on it. It’s also not bad without one, but will dive occasionally