How are you liking the RC cover? I have a 2022 f150 and I’m most likely gonna buy this tonneau cover for my truck too
@AndreychukAndrey3 күн бұрын
I like it. I actually like it better then the truxedo truxport.
@anonymous..-8 күн бұрын
Still using your Stratus?
@AndreychukAndrey8 күн бұрын
I don't have it anymore.
@paulscottmc11 күн бұрын
What is the model number for this MW?
@AndreychukAndrey10 күн бұрын
ME21H706MQAA
@Mister_CVC19 күн бұрын
What to do to remove the 15mm nuts? The one nut on top is now nearly rounded. Please help. The nut is not coming off and have applied the wd 40 and other lubricant.
@AndreychukAndrey19 күн бұрын
Can you give me a time stamp in the video.
@Mister_CVC19 күн бұрын
@@AndreychukAndrey 8:30 thank you.
@AndreychukAndrey19 күн бұрын
Can you remove the stud? Instead of the nut?
@Mister_CVC19 күн бұрын
@@AndreychukAndrey I will definitely try. The vehicle I'm working on is a 2009.
@Mister_CVC19 күн бұрын
@AndreychukAndrey I have to try removing the stud as I haven't tried yet. To confirm, there is another stud underneath and that'll take ¼ as well it looks like. I don't understand the mechanics behind this and why it couldn't be bolts all uniform and throughout.
@crxzrxguy917420 күн бұрын
I just used your clamp trick to replace my broken valve stem! Good info, thanks!
@robertcampbell805425 күн бұрын
Worst how too video on the net
@xorico054gnv828 күн бұрын
Mine is identical to the one in the red video too
@xorico054gnv828 күн бұрын
I'll send you videos and photos if you're interested, just send me the stagran
@xorico054gnv828 күн бұрын
Good evening, I have a red Kawasaki ninja zxr600 like this for sale, would you be interested, have a Lucho motorcycle with me for a while?
@AndreychukAndrey28 күн бұрын
I don't understand what you said.
@rickyjabz247Ай бұрын
Did u have to program it
@AndreychukAndreyАй бұрын
No
@walijumaat2158Ай бұрын
do i need to rebalance the wheel if i do this?
@AndreychukAndreyАй бұрын
No
@deant6627Ай бұрын
Thanks so much for this clip, my 2023 Kawasaki Z900 started making that ticking noise at only 4000km and this method worked perfectly. Sounds like new again 🙂
@PaZuZu_327Ай бұрын
Why is Kawasaki not fixing this problem since over 20 years 😂
@AndreychukAndreyАй бұрын
Idk do the newer ones have same issue?
@PaZuZu_327Ай бұрын
@@AndreychukAndrey idk ive heard some models still have till 2019 but idk about the newesr zx6r 🤔 Imagine its just a 1 click fix but youre mechanic tells you that your valves have to be adjusted..robbery 😂
@deant6627Ай бұрын
@AndreychukAndrey Yes unfortunately, they are still usung the same spring/ ratchet system, but at least its an easy fix. The noise was really noticeable around 4500 RPM. I used the 2nd method, heard the click & the noise is 100% gone and sounds like new again. Thanks again for making this clip as I otherwise would have taken to a shop that would have no doubt pulled things apart & would have been scratching their head.
@PaZuZu871Ай бұрын
I only did the 2nd trick and it worked..but you gotta be on a quite place to hear the click..no phone ect around 😂😂btw thank you dude 🤝🤝
@NickPissanuАй бұрын
Thank You.
@Dedicated_8Ай бұрын
If someone is doing their own repairs and changing their own chain, i would.hope we know which way the wheel spins
@sosainnaАй бұрын
Thx man ❤
@thomasremartini7642Ай бұрын
I did just one click but now it’s whining when I rev it (perfect at idle) , is it possible? Or I just missed a “click”?
@AndreychukAndreyАй бұрын
You should be fine. Try starting at cold start and hear it.
@thomasremartini7642Ай бұрын
@@AndreychukAndrey at cold start it sound perfect , no whining or nothing
@AndreychukAndreyАй бұрын
I think you should be fine.
@VeedeesVoyageАй бұрын
Thanks from saving me from selling my bike last year came across this video again😅
@legotech7Ай бұрын
What is the max. height of this lift?
@AndreychukAndreyАй бұрын
Not sure I don't have it no more.
@addisondre8083Ай бұрын
am i doing it wrong or is there a meaning if it dosnt click?
@AndreychukAndreyАй бұрын
It's probably stuck, try using your finger to free it.
@addisondre8083Ай бұрын
@@AndreychukAndreyi got it the click is gone lmao you’re great however i did tighten it too much bc i didn’t hear anything so now i gotta do step 1 😂 thankyou man
@GboostedАй бұрын
Was this for a manual transmission?
@AndreychukAndreyАй бұрын
Yes
@jafowellstonАй бұрын
This is awesome!!! Thanks for sharing!!!
@GboostedАй бұрын
I just finished installing my stillen supercharger and I forgot I put in a new flywheel and clutch and I forsure don’t remember lining anything up lmao! You a real one for this video🙏🏽🙏🏽🙏🏽
@bora3746Ай бұрын
Good
@scottbishop8474Ай бұрын
Thanks for the review. I've been looking for a replacement for my 07. I have one question. Is it more comfortable than the old one?
@AndreychukAndreyАй бұрын
It's softer. I did notice it to be more comfortable.
@Wayne5455Ай бұрын
Show how to do this on a 3.6L engine. This one is pretty simple
@eshteven2497Ай бұрын
Does it matter how tall the locks are, mine are 33 mm. I just ordered them.
@AndreychukAndreyАй бұрын
Not sure what you mean.
@mrPaul-jc4zlАй бұрын
Dude, you still ride this bike, that's amazing! I really appreciate your tutorials, it is so much easier to make a maitenance and service for zx6r 07-08. Another time - thank you for sharing that vid's. Ride safe mate!
@AndreychukAndreyАй бұрын
Yep still rocking it
@wisidiefin1329Ай бұрын
What is that manual and where can i find/buy one? I can only find digital ones
@AndreychukAndreyАй бұрын
Mine came with the bike.
@CedricGilliam-qc3fuАй бұрын
Very well put together yeah he
@josesalgado-ve3qg2 ай бұрын
Bro I’m sueing them for not including in instructions crank sensor on flywheel wtf 🤣🤣🤣
@knapikj0312 ай бұрын
you are an absolute legend mate. many thanks!
@AJHNarrates2 ай бұрын
Or you can get screw on ones for 2 bucks each and it takes less than 30 seconds 😅
@dundyshibby2 ай бұрын
How are these holding up? Did they rust? Did the new key break?
@AndreychukAndrey2 ай бұрын
I don't see no rust and the key is strong. No issues so far.
@youcanthide0042 ай бұрын
Great video, looks awesome. Thanks, Homie.
@Blackberry73993 ай бұрын
You saved my life... thanks
@squaremileca9853 ай бұрын
Awesome walk through, best of the best
@codymeyer52623 ай бұрын
What size is the quick discounted ?
@AndreychukAndrey3 ай бұрын
Not sure what you talking about.
@codymeyer52623 ай бұрын
@@AndreychukAndrey the quick discounted that is on the fed side on the fuel pump that fitting is it 3/8s or 5/16 I’m trying to do my an lines but I’m unsure what the fitting size I need to connect to top of fuel pump
@AndreychukAndrey3 ай бұрын
@codymeyer5262 Not sure sorry
@mike8140313 ай бұрын
1:39 no special tools required ...other than all the special tools you already got lol just kidding, thx for making the video, and definitely appreciate the extra helpful information. Also I like how your straight to the point and don't waste time, you do a great job with explaining it. What would I do without these helpful how-to videos? Also it would be helpful if you mentioned what year, make and model vehicle your working on, but no big deal
@Yezir7603 ай бұрын
My back hurts just watching this watching this.
@juice0073 ай бұрын
I just bought one and it started my dead minivan battery just fine! The battery was pretty low so I had to prime it a few times but it eventually started!
@Boat3003 ай бұрын
Yo is your fog lights wiring harness OEM ? Trying to figure out why mines don’t work ..
@AndreychukAndrey3 ай бұрын
Yes
@AndreychukAndrey3 ай бұрын
Also it depends on the led you use.
@gerardjones78813 ай бұрын
They don't deliver to residential address. too bad.
@AndreychukAndrey3 ай бұрын
They did to me.
@backstreetzero20193 ай бұрын
Great video - thanks man.
@ihsanalalawi48714 ай бұрын
Dude says no special tools and first step is using an electric saw 😂
@AndreychukAndrey4 ай бұрын
You can use a hand saw.
@Chavez_Auto_Detailing4 ай бұрын
Hey great video. I’m about to order mine. Any issues you ran into with the lift since uploading the video?
@AndreychukAndrey4 ай бұрын
No issues whatsoever. Unfortunately I did end up selling cause I'm trying out a different set up.
@Chavez_Auto_Detailing4 ай бұрын
Ok good. What setup if you don’t mind me asking?
@AndreychukAndrey4 ай бұрын
@Chavez_Auto_Detailing I use 2 jacks, I can use any jack up point on the car or trucks. www.autozone.com/engine-and-vehicle-lift/jack/p/duralast-gold-3-1-2-ton-professional-foldable-garage-jack/1276164_0_0
@Poo-zg8ot2 ай бұрын
Yes. The car hit the roof of garage.
@AndreychukAndrey2 ай бұрын
No issues but unfortunately I sold it.
@john40704 ай бұрын
Thanks brother this video is very detailed and help me thru the process of doing one myself
@faizanraza2554 ай бұрын
I was able to install 160, I got the same bike even the same color 2010 model EFI
@geoffap04 ай бұрын
I was wondering when a tool company was going to come out with this! It would be sweet if they had an in-vehicle Charger that could also jump start your rig!