Banack Industries

Пікірлер

@bhfarr 10 күн бұрын

was having problems with my starter so got a replacement. Like a bonehead I had to cut a few wires and didn't label them as I did. Any chance I can get a pic of starter wiring

@mbetancourt4th 14 күн бұрын

Who made the full front bumper replacement

@BanackIndustries 13 күн бұрын

gridiron bumper corp

@mack_titan 18 күн бұрын

Hi, are there any lift kit options to fit these larger tire-wheel combo? I have 40" tires on 22.5 and I need to figure out how to lift the truck (2012 F 550). There are no lift kits options at all...For the rear, I can put in blocks but front is an issue.

@BanackIndustries 17 күн бұрын

Fabtech is the only company I know of that makes a lift for the older generation of f550 trucks, they make all the way up to a 8in

@canadianwild4737 18 күн бұрын

First off, the truck looks great. I’ve been considering putting 22.5’s on my service truck. Where did you get the kit?

@BanackIndustries 18 күн бұрын

@@canadianwild4737 www.duallywheelscanada.ca

@BanackIndustries 18 күн бұрын

@canadianwild4737 it was the best decision I made, truck rides 100 times better having a bigger tire and the engine sits 500rpm lower at hwy crusie speed

@canadianwild4737 17 күн бұрын

@@BanackIndustriesdid you need to install a lift, or leveling kit?

@BanackIndustries 17 күн бұрын

@@canadianwild4737 My truck is stock height

@canadianwild4737 17 күн бұрын

@@BanackIndustries what was the final cost of the upgrade?

@truckinmike7526 23 күн бұрын

That voice smh

@BanackIndustries 18 күн бұрын

Shake it off like T-Swift baby

@ShatteredRoxanne Ай бұрын

are these the same headlights that gabe farrell productions had in his old ford truck cardi b

@BanackIndustries Ай бұрын

@@ShatteredRoxanne yup

@stgyoungfrizzle Ай бұрын

Can I remove this before I delete dpf??? Or do I have to do both at same time??

@BanackIndustries Ай бұрын

@stgyoungfrizzle - tuning is required to delete the egr yes. Ive personal never delete the ccv filter before tuning but there is no sensors on the 2020+ models so I imagine it wouldn't notice

@huntaaa4 Ай бұрын

man got 10,000k miles bro's got like a billion miles

@BanackIndustries 18 күн бұрын

Not a clue what you mean by that, thanks for watching the channel 👍

@someguy4476 Ай бұрын

The guys at SPE are a bunch of jerk offs. My return line broke this morning at the fuel filter and pumped almost half a tank of fuel all over my truck and road. Fucking Ford garbage. Black Gold Diesel got me all fixed up though.

@jack.w2307 Ай бұрын

I'd recommend getting a vacuum filler for the cooling system saves a ton of time and way easier, once i used it for the first time i never wanted to go back haha

@BanackIndustries Ай бұрын

They are definitely handy devices

@samkiepprien3858 Ай бұрын

So I just broke the Bolt at the bottom of the coil spring that holds it in place. You have any suggestions on fixing that? It's almost slid off completely.

@BanackIndustries Ай бұрын

Drill/extract the broken bolt out

@Livinglethallife Ай бұрын

Awesome. Gotta get a 550.

@Gilmore304 Ай бұрын

Why? Buy tuber yourself, delete yourself, ford guys 😂 Fords delete process is the most efficient and owner friendly process you could own. Save your dad some money and work on your own gear

@BanackIndustries Ай бұрын

@Gilmore304 did you even watch the video, only part of the delete that wasn't done by myself, is i took the truck to Am Diesel Performance and they did the tuning at their shop. At the time of filming this video the only option for tuning was bench flashing the ecu, yes the 17-19 powerstrokes are able to be tuned remotely with a ezlynk, but the 2020 and up still require a ecu bench flash

@Gilmore304 Ай бұрын

DO NOT OIL! ! Grease with petroleum or any seize the flanges on nuts.

@BanackIndustries Ай бұрын

You oil the flange between the nut my guy

@michaelhunt5381 2 ай бұрын

what would happen if you sent it to someone in canada that person sends it in to get tuned and then sends it back to you?

@BanackIndustries 2 ай бұрын

Great question 🤔

@ScottLight10 2 ай бұрын

Looking good, just found your build. Backed up and watched all the videos of it. In the process of building a Ranger myself.

@BanackIndustries 2 ай бұрын

Hell Yeah 🤘

@dcb_777 2 ай бұрын

How many plugs are disconnected under the hood?

@BanackIndustries 2 ай бұрын

Zero unless you do a egr delete, then there's 2

@dcb_777 2 ай бұрын

@@BanackIndustries Zero!!?! So if the EGR stays physically intact and no SOTF, no plugs need to be disconnected? So strange. Lots of different opinions. Seems like there’s no 100% way. Depends on how your tune was written maybe?

@BanackIndustries 2 ай бұрын

Here's the deal, I've had 2 2020 6.7 powerstrokes, this f350 and my F550 that's in recent delete videos, both units I went and had both amdp engine and transmission tuning flashed on the trucks, then without unplugging or removing anything from them, drove them 1hr + home both times, the only reason you remove everything and unplug items is to prevent a short in the system over time if they fail

@BanackIndustries 2 ай бұрын

kzfaq.info/get/bejne/gb2ZmJepptWrZHk.htmlsi=CwhX9r-3lyZczHwY

@dcb_777 2 ай бұрын

@@BanackIndustries That makes sense 👍🏻

@someguy4476 2 ай бұрын

Are you still in the GP area?

@someguy4476 2 ай бұрын

Looks cool. Hope to see it on the roads of GP soon!!

@starclassic712 2 ай бұрын

Sweet!!! Cool video ma man.

@dakotamcneely5779 2 ай бұрын

What weight rating are those springs vs old

@BanackIndustries 2 ай бұрын

Not a clue what the actual spring rate is. , but they came off a 2020 f350 srw truck I had

@jtopdawg6 2 ай бұрын

Aliens took my emissions equipment for parts when they spaceship broke down. Darnest thing.

@BanackIndustries 2 ай бұрын

THANK YOU for the good laugh

@joshmarauder 2 ай бұрын

How do u like amdp? Can u use amdp for tcm and ez lynk for engine tuning?

@dallascottle3714 3 ай бұрын

Earnie from Sesame Street

@BanackIndustries 3 ай бұрын

Who me

@DentsideAddict84 3 ай бұрын

I did a 5” flopro on my 17 ccsb 6.7 ford and it fit horribly for me. It wasn’t expanded at all so I had to flare everything and pound it all together. Was very disappointed. But my dirty diesel egr and CCV delete was amazing.

@BanackIndustries 3 ай бұрын

I've never had a issue with a flopro setup and or ever heard of that, must have been a Monday made pipe 🤔

@DentsideAddict84 3 ай бұрын

@@BanackIndustriesyeah everyone I talked to said they slip in nice and easy but it was awful. Emailed flopro about it and they didn’t say anything back. Took me nearly 4hrs to get it installed. And I had the DPF out in 45min.

@LufieH2 3 ай бұрын

It what about the fuel pump ?

@BanackIndustries 3 ай бұрын

Mounted on the frame as an inline setup

@jrpro130 3 ай бұрын

Any issues with the hub centric lug nut? They scare me hauling weight like these trucks

@BanackIndustries 3 ай бұрын

Hub centric nuts are the flange style that just provide clamping force and then the weight of the unit is transferred to the wheel with the Hub / pedestals, it is the strongest available setup and how all newer semi and most 3/4 ton and 1 ton trucks are from factory

@6speedguy845 3 ай бұрын

I have used harness seat belts many times before

@someguy4476 3 ай бұрын

We can’t keep the Sailuns(?) on our fleet of 18 wheelers. They don’t last. Ended up going back to Michelins Great set up though!

@BanackIndustries 3 ай бұрын

What kinds of issues were you seeing with them? blowouts? Or just premature wear?

@lukecreaser8796 3 ай бұрын

Who notched your wheels? Been looking at them on Dually wheels Canada website

@BanackIndustries 3 ай бұрын

Got them from Duallywheels.Ca, Click the link in the video description

@wesleywilliams8129 4 ай бұрын

These are the worst videos ever.

@BanackIndustries 4 ай бұрын

Feel free to make your own

@JLBRACING21t 4 ай бұрын

What did uoi use to rivot it back to gether

@BanackIndustries 4 ай бұрын

Aluminum soild rivets and a air hammer

@sav300 4 ай бұрын

How has that transmission tune been doing?

@BanackIndustries 4 ай бұрын

Hasn't blown up yet

@sav300 4 ай бұрын

@@BanackIndustries good deal. Getting that trans tuning installed myself this weekend and I am really excited to see how she runs. Went all out with the new intake manifold and all.

@robertsanchez3784 5 ай бұрын

How can I get that in the US if website said can’t be shipped?

@454budman 4 ай бұрын

try diesel dudes or unlimited diesel

@BanackIndustries 3 ай бұрын

Not too sure anymore, sadly lots of the canadian companies have stopped sending parts state side because of the epa being able to fine canadian suppliers

@gregbrowne9932 5 ай бұрын

Way the hell too much talking

@BanackIndustries 5 ай бұрын

Don't like it, film your own video and stop watching mine 😘

@Bucking_Bronco 5 ай бұрын

Hell Yeah Brother!!!!! The sounds of Liberty!!!!

@DChase-ky2pg 5 ай бұрын

Sick set up. I have a 2015 and I'm looking for a nice set up like this. Strong work

@courtneycottingham1462 5 ай бұрын

I pulled mine out and won't recoil

@BanackIndustries 5 ай бұрын

Definitely a broken spring, just buy a complete replacement and bolt on

@courtneycottingham1462 5 ай бұрын

Well I figured it out it recoils all way I let go of vice grips and now it don't seem to catch

@courtneycottingham1462 5 ай бұрын

Nevermind lol

@jasonschaeffer72 5 ай бұрын

My 17 f350 6.7 dually is deleted with everything still on my truck. I plug welded egr pipes to block them off and gutted the dpf ran a straight pipe inside and reinstalled. To inspect my truck visually it still has factory emissions intact. I call them my SNEAKY PIPES 😂😂. I did do a DPF back Banks exhaust and cold air intake also. I wasn't looking for a 1000 hp lol. I only wanted it to be really reliable and just just benefit from the add power of just being able to Breathe.

@BanackIndustries 3 ай бұрын

Definitely a option doing it that way and has been done that way many times by different shops

@fckupayme9585 Ай бұрын

Need a video lol

@justinb5304 5 ай бұрын

Nice rig ! Gotta 19 mbrp braap brap n cat delete. Good rig .... sell before mas problemas

@inversionesgoc.a.9019 5 ай бұрын

good morning I need your help How many gallons does the hydraulic box hold?

@BanackIndustries 5 ай бұрын

4-5 pails

@jasonroot7061 5 ай бұрын

Keep the post comin this is bad ass

@arjilian2259 6 ай бұрын

bro just looks unreal love it. i just ordered same wheels in 24" thanks this video helped me a lot

@noeeon9910 6 ай бұрын

My F250 hits the bump stop HARD for any little bump on the driver side. I thought it was the shocks so I changed them out for ranchos and it dampened the blows abit. It's been like 10 months and it's back to hitting the frame hard. I hate it, I'm guessing it's the coils springs.

@BanackIndustries 6 ай бұрын

I would have to agree with coils

@noeeon9910 6 ай бұрын

@@BanackIndustries thanks for replying! So I've been looking for new coil springs, any suggestions. I know it won't be as smooth as a Cadillac but something close would be nice. Also it's stock but everything I find seems to have a lift from 1.5" to 6" ..

@BanackIndustries 6 ай бұрын

@noeeon9910 there is lots of people that have stock coils sitting around after lifting newer trucks, the coils are the same all the way 2005 - 2023, even go take to a local dealership they might have some sitting around or they tossed in the scrap bin

@noeeon9910 6 ай бұрын

@@BanackIndustries thanks for the advice! I like stock, I only modify where it counts.. the engine.