Editing it as we speak haha you must of known something, thanks so much mate!

Haha sounds like a good time never done a ps4 before what country you in might be a bit risky 😬 with how shipping treats packages 📦 😅

@@TheDiWhyGuy I'm in USA lol

I'm in France brother it would cost so much and I wouldn't trust the shippers lol but if I find a PS4 I'll make a video for ya, cheers bro!

@@TheDiWhyGuy awww thanks. and that sucks!

Not far off really :)

Cheers brother might be time to get out the old 360 ;) haha thanks for watching mate!

Cheers mate thanks so much. Sounds like you had it sorted did you have the Blades Dashboard sad to lose such a Xbox but not much you could do it amazing I went this long... Glad you got a S sorted to replace the old Phat one, hopefully a Modders remakes Blades for us one day :D

@@TheDiWhyGuy yeah it was the Blades Dashboard :( I had it because I bought it back in 2007 without DVD drive and didn't know you needed a DVD drive LoL. But I kept it and when I found out the J-tag stuff I finally could use the Xbox :D I was always buying faulty stuff even as a kid so I could repair it.

​ @OneTheAndOnlyOne I bet it was nice while it lasted :) you can clone your old drive to a bigger 2.5" drive if you got loads of stuff to save and add to the new S model just editing the vid atm... That's the way I did the same thing best is when you take two broken things and make one good one keep up the good work bro!

@@TheDiWhyGuy I just grabbed the phat HDD from it's casing and put it in the XboX 360S. Some tape on the HDD so I can pull it out again, lol :P

That's the way brother love it :)

Well its a off line device...

​@@TheDiWhyGuy0:22😂

@@JenGM24 🤣🤣🤣 thanks for watch bro 😁

Yeah bro I heard its really good do you know if it works in Linux?

Thanks for the info I know what you're saying the slims red dot not ring and not as common as the ring death I will try explain better next time!

True that was a major issue in the falcons

Cheers mate 100% more of these to come I got to get a few parts I want for this Xbox before the next one on this topic. Next I want to do a Linux vs Windows 10 video for my Windows XP PC as best dual boot option for retro hardware to get online should be finished in a few weeks, thanks for watching!

@@TheDiWhyGuy Sounds like you've got some fun stuff planned!

Cheers bro its defiantly not for the faint hearted, but if you got a bit of soldering experience well worth giving it ago or get some practice on a dead unit 1st and you'll be away!

Thanks mate. Yeah not going to lie I'm probably a bad reference I been soldering from 9 years old as the old man had a PC / electronics company when I was a kid but its never to late to learn. The bro Zombie only started a few years ago and now he one of the best I know. Good luck!

RIP ⚰ press F to pay respects 🙌 for blades will be forever missed and never forgotten for Microsoft sellth and taketh away...

Cheers mate, you doing good work keep that up, was thinking about using one off a old gpu or something but just remembered I had that old circuit board laying around so went with that instead of sacrifice a gpu 😆 thanks for the pro tip 😀

Yeah brother you know it can't go wrong!

@@TheDiWhyGuy Yeah, if I never found out about Linux, I wouldn't enjoy using my computer.

I fully get that what's your go to distro?

@@TheDiWhyGuy I run Gentoo on 2 of my machines, and EndeavourOS on one of my machines.

Cool I never tried those ones I should check them out

That's so awesome thanks for watching mate!

Cheers mate 🍻

Yeah bro 100% I'm on the hunt for a water block thanks mate!

Bahaha so true! Thanks mate 😂

100% soon as I get my next job come in I'll be trying to find a water block for it, so stay posted cheers mate!

Don't use the falcons. The jaspers are upgraded and the Trinity and coronas don't have that issue. Plus in dash launch you can crank up the fan speed if you wish.

Nice one thats good timing. I always use cate6 solid core ethernet cable for fine soldering it worked really well on this job just rember to ad a 10k resistor on the pll wire and you will be good also stranded cable will work just make sure its really well twisted and tined so no lose wires sneak out. Good luck mate just take your time and have fun 💪

@@TheDiWhyGuy Thanks a lot! I'll check if I have some old ethernet cable lying around, as for the resistor, I have ordered a whole set of 400 resistors (different values) along with the Pico.

Nice that's the way sounds like you got it sorted

@@TheDiWhyGuy Yeah, I did get everything sorted out before doing it. Had to make sure it all goes well as it is my first ever mod and the first time I would solder on a mobo so I was a bit nervous. Thanks to your tutorial everything went well, I have just finished setting up Aurora and I'm looking forward to test some games later. I'm still shocked I got it working first try , thanks a ton for the help and keep up the good work!

Nice one you done well congrats mate! Hope you have loads of fun on your your new beast of a 360 :D

Yeah bro crazy how well they locked it down even the PS3 is way easier but if you can find a dead Xbox360 to practice on well worth it!

Me to but what I want more is people like dis to quit wit da click bait most ppl ain't tech engineers this is as far from easy as u get might as well build your own dam console from scratch lol

Your not wrong, it could be bit much for some but if you find a dead unit to practice on you will get there in no time. Cheers mate!

@@TheDiWhyGuy yeah went through 4 trinity boards before I finally got it right also tried a corona board but hated it and salvaged a halo reach case the grey 1 in the process

Holy sh1t bro 😳 thats guttering can you make a jumper wire to fix the motherboard you can send my photos of the damaged boards might be able to save them my email is [email protected] or could be used as practice boards for upcoming modders thanks for sharing hope I can help!

@@TheDiWhyGuy I threw 2 away I only kept 1 trinity board where I've took the chime off plus 1 corona which it is glitched but crashes I think I damaged underneath the gpu/cpu plus on trinity I've pulled 3 tracks up doesn't boot at all

@@anthonyhowson7165 it happens some times when you destroy a trace you can solder a wire as a jumper from the closest connection points but not always possible just got to track the circuit what can be a bit of a mission on modern PCB's...

A little bit, I'm trying to learn atm so I put my Windows in French and forgot to put back English before recording this video lol hopefully it wont mess anyone up...

@@TheDiWhyGuy no stress man, i was just wondering cause the accent lol. keep going at in bro, youll be fluent alot sooner than you think if you focus on it Je croise les doigts

Cheers bro defiantly hard but well worth it been living in France a few years so about time I got fluent haha merci beaucoup d'avoir regardé

Thanks so much bro!

Thanks so much, yeah bro 100% that is the best way for someone to learn and a dead unit to practice on helps a lot too.

I had to reread that I better understand what your saying lol. Yeah bro I do everything outside for the lighting seems like no matter how many lights you use its never as good as the sun and lucky the deck has a deck above as well so even if it starts to rain its pretty safe out there I would love a fancy lab to work in but we only got a one bed room flat haha thanks for watching

Yeah bro it will work but if you have a different motherboard you will need a guide for that type of motherboard to get the right pins to solder the wires to. What is the model number of you Xbox and the input current? I can tell you if it will work.

@@TheDiWhyGuy no it's just a question because I heard there some Xbox 360 motherboard can't be hacked but this will be a helpful info for near future

Oh yeah your right the lasts ones released that are more square shaped can't be modded so don't get one of those ones. The Xbox 360 Slim all can be and red ring die less than the first models so defiantly look out for cheap slim model. Good luck mate!

@@TheDiWhyGuy thanks

​@@GhostGamer799very last E models can't be hacked. All slims are moddable and getting a fat, unless it's dirt cheap and Jasper, is not worth it.

Cheers mate!

Cheers mate means a lot. Those are good ideas definitely will have to do a follow up.

Definitely one of the best 👍

Thanks so much ☺

@@Totallynotmwa whats that got to do with the price of fish?

@@TheDiWhyGuy talking about the thumbnail lol

@@Totallynotmwa oh haha well This laptop is from 2007 and so is Windows Vista so by your logic it makes perfect sense 😆 why you defending Trust fund baby Bill Gates he literally stole MS-DOS from Gary Kildall. Gary Kildall had created an OS called CP/M. IBM was shopping for an OS for its PC, and struck a deal with Microsoft. Microsoft didn't actually had an OS when they made the deal, so Bill Gates paid Tim Patterson a CP/M engineer $75,000 to clone CP/M OS and renamed it MS-DOS dudes stole every good idea he ever had and sues small business that give anyone a free key... Go watch his TED talk form 2010 if you want to know what he is doing these days it much worse than you could imagine...

Not defending bill gates lol just saying some truth

@@Totallynotmwa each to their own thanks for watching mate

Yah mate Linux Maté is mint as mate haha but seriously might try it on my Windows XP build in a video out soon, cheers!

Well that's me best video views to date so yeah 😂 Are you going to buy me a SSD more RAM and a Windows key? because even a debloated Windows 11 light needs more than 2 GB of RAM and a HDD would never work as well as Linux and I have run out of Windows 7 keys so yeah no thanks Linux wins for this old girl, thanks for watching buddy!

@@TheDiWhyGuy idk if you need to buy keys, aren't these old computers already bundled with win 7 / 10? I agree, 4GB of ram is probably minimum after debloat.

This PC was bundled with Vista have you ever used Vista? Its trash and this PC is not compatible with XP the greatest OS ever crated so Linux is the best option for this build. If your interested in this free PC build in a NES shell you can watch the build video here: kzfaq.info/get/bejne/jq2FhrmCs9DLpn0.html cheers mate!

Thanks mate!

Thanks so much mate fully 100% more of these to come 😁

@@TheDiWhyGuy thanks m8 ❤

Ubuntu is awesome there are a lot of options for Linux distros just got to find the right one for you, I have heard good things about Ventoy I will have to try it out next time chees mate!

Cheers mate. Yeah you got it low budget just got to work with the tools I got. I've moved to France from New Zealand for my wife and I'm not working yet and the channel is long way off be able to monetize so pretty much have to sell the old projects to fund the new one's. Its really sad to let them go after working so hard on them but its all part of it. With each new project I can get more advaced with my methods or return to the project down to line with more upgrades if I can get away without selling them off haha. Love 775 PC's still rember when they were new the performance was so much better than the Pentiums before. I had my 1st one almost 10 years before getting a upgrade. Thanks so much for watching!

That's so true man they don't make them like they use to, sounds like you sitting on a gem and one day you will be able to have a load of fun fixing it up. 😊

Thats the way I was thinking about dual booting my more modern PC to try it out since it runs so well and by the sound of that I might even get a boost as Windows 10 is so over-encumbered these days. Thanks mate!

@@TheDiWhyGuy you can always get them back windows etc as long as you have the usb stick you are laughing just have to tinker a bit with some games but the rewarding part is what makes it worth it <3

100% I would love to see how it preforms in video editing as my 8 year old CPU starting to show its age and I can not afford to upgrade these days as PC's getting way over priced and the reliability is getting out of hand. Thanks 4 you advice. 😊

Thats fair there are a lot of other options so that should be no problem for you. Thanks ao much mate.

This laptop is from 2007 and so is Windows Vista so by your logic it makes perfect sense 😆 why you defending Trust fund baby Bill Gates he literally stole MS-DOS from Gary Kildall. Gary Kildall had created an OS called CP/M. IBM was shopping for an OS for its PC, and struck a deal with Microsoft. Microsoft didn't actually had an OS when they made the deal, so Bill Gates paid Tim Patterson a CP/M engineer $75,000 to clone CP/M OS and renamed it MS-DOS dudes stole every good idea he ever had and sues small business that give anyone a free key... Go watch his TED talk form 2010 if you want to know what he is doing these days it much worse or just cry more up 2 you buddy.

Yeah bro 100% you can and you can install from software manager. I was more trying to show how terminal works as a quick over view sometimes its the only way to do things like change paging file size etc. Its easy for us but some people have never used commands before so was hoping to show its not so hard...

That's fair I was more trying to show how terminal works as a quick over view but as @rufuspilula247 said you can double click .exe files to run them, and you can install wine from software manager. no need to use the terminal. But sometimes its the only way to do things like change paging file size and it better for trouble shooting. So you don't have to use it but its good to know how good luck buddy thanks for watching.