Can you write on the gessoed pages when dried with a pen and or marker or does it have to be special pens/markers?
@scrapinmaniac3 сағат бұрын
@@deeruler1688 hi there, I able to write with a sharpie. But gel pens is not permanent. Also white gel pens does not stick. Hope this helps.
@AmberGarrett-py6ry6 күн бұрын
BRILLIANT! to test the sandwiches on the manual machine first!
@roden7016 күн бұрын
Great idea because tonersheets are expensive!
@cory303able17 күн бұрын
Your video helped me thred 5his old beauty of mine, thank you. My stich was perfect! Will save to oil and grease if it slows down!
@scrapinmaniac15 күн бұрын
glad it was helpful
@calhiser826527 күн бұрын
On the signature machine that I have all of the oil holes have red paint to point out what gets a drop.
@calhiser826527 күн бұрын
I found a new peddle with cord on Amazon for $20😊 I gave $30 for the signature at a thrift store. So$50 total
@tellenabracey9314Ай бұрын
I have a uht j1414 Montgomery wards, my issue is that the presser foot is stuck down I can't lift it . Any suggestions on how to fix it? Thanks for ur time.
@brendajones7756Ай бұрын
What are the cutting mats you used? I have the regular Gemimi. I sometimes use magnetic vent covers to cut dies. All of the plates cost too much.. And the hot water and cookie sheet is tiring.
@scrapinmaniacАй бұрын
I actually use the Spellbinders GC-014 Grand Calibur Junior Base Plate, 8.5 by 6-Inch amzn.to/3VZhgr9 and one Gemini plate plus cardboard shim for all my thin dies. It does not warp my plates and way cheaper. And as for the Gemini plates, I used generic plates, 6 x 9" Die Cutting Plates Die Cutting Machine Accessaries (Clear).amzn.to/4eXYhFZ. Test this sandwich. Hope this works for you.
@lauraafrouzian2959Ай бұрын
Thank you sooo much for all the information. I always try to do my tune ups on my machines. Question: Why is it that we shouldn't use oil on the gears? Thank you in advance for your awesome Help. Greetings from Bakersfield,California 😊
@FantasyVSReality26Ай бұрын
Thank you for sharing !❤
@SueWilliams-sw3zn2 ай бұрын
Thank you for sharing this wonderful information about this sewing machine. My truest best friend gave me her mother's sewing machine and her mother has passing to be with the heavenly Father. And I had no idea how to thread this machine until I typed in the model number and I showed me the video. Once again thank you for Susie Williams from Cuero Texas.
@sandyreinking32712 ай бұрын
thank you!! Just starting to play with different mediums. This was so helpful.
@pastda32 ай бұрын
Man do I love the internet and KZfaq. 😆 I knew I had one of these things and I never used it because it never worked properly. With all the "stamping wheels" coming to the market I thought this would produce a similar result. Thank you for this oldie but goodie. I will have to try this out to see if my assumption is correct.
@QWERTYUIOP-wu6ht3 ай бұрын
I love this! So straightforward and direct to the point unlike DIY videos today.
@Mickey-jn8hz3 ай бұрын
The more expensive towels are thicker, the cheaper ones are easier to sew.
@Mickey-jn8hz3 ай бұрын
You are very good at explaining what you do, nice clear, concise instructions, love it!
@Mickey-jn8hz3 ай бұрын
I like your pattern, thank you.
@user-sy5vq8ii7i4 ай бұрын
Hi on the Gemini I have several other plates. A white one and rubber mat, don’t you use them with your dies and embossing? I might try self healing mats because the cutting plates bow easily and are expensive. Thanks though.xx
@carrieallen72164 ай бұрын
Thank you for sharing!
@user-pq5xi9fc1g4 ай бұрын
Can you change it to handwheel turning with the hand not on the motor.
@Sandrab7695 ай бұрын
I hope to make some of these soon. Thank you for all the work you put into this video. You did an excellent job. Yes, there is always a right and wrong side of the fabric. I used to work in a garment factory and learned how to know the difference. Yes it is VERY hard to tell so most people don’t need to worry about it, but if you look at both sides in a well lit area you can see it. The right side is on the bolt, so i make an X on the wrong side,so I can keep it correct. You can use a stiletto at 50:40 to help tuck the towel in.
@oroblanco47635 ай бұрын
Thank you so much for sharing your tutorial, I made my very first one it turned out so well, of course I am going to make more for gifts. I only watched your video twice and it came out great.
@scrapinmaniac5 ай бұрын
Wonderful! Thank you for watching.
@scrapinmaniac5 ай бұрын
Thank you for watching and glad you found it easy to follow
@cindycarnes64415 ай бұрын
The best thing I learned in a long long time. I have been buying the little round discs. There aren't very many in a package. They are just too pricey. This is awesome. Thank you.
@cindycarnes64415 ай бұрын
I've watched at least 10 or more tutorials on the tissue holder, this is the best. No excessive talking, very quick, informative and helpful. I too would sew assembly line. I like that you did that. It's all about efficiency for me. They are so cute. Thank you
@ericholt39146 ай бұрын
I LOVE PAPER PADS
@ramonanussbaum7 ай бұрын
The title was misleading. Tuned in about the precision press but got a a lot of talk about something else.
@ericholt39147 ай бұрын
AWWWW
@ericholt39147 ай бұрын
ART
@ericholt39147 ай бұрын
I LOVE ART SUPPILES.
@user-eu2ko2qv2p7 ай бұрын
Nice job and thank you for sharing this tutorial!
@user-pi4rf4re8h7 ай бұрын
I wan this punches...from where I will get ? it
@mpbailey188 ай бұрын
why would you use Cuttlebug plates? Company doesn't exist any more.
@DavidaStockman-cz8xy8 ай бұрын
Sew the 4 by 8 piece in a quarter of an inch first and then place towel inside,pin and sew. Much easier now.😊
@user-jf5tn2og3o8 ай бұрын
I had my cricket to draw it from Pinterest and then that way I could draw as big as I needed
@turquoismama339 ай бұрын
I have this very model and need to replace the large belt. Would you be able to give me any info on that at this time. I know this video was made some time ago, so I'm shooting in the dark maybe. I need to know how to do it and would buying from a site that supposedly shows the exact belts for this model be a good idea? My concern is that they have been sitting on a shelf for forty years. Thanks.
@SweetT6019 ай бұрын
I bought the glimmer machine after watching your video. I am hoping I can use it with my go power and emboss machine. It’s coming today. I have a sizzix sidekick I can use if not but I really want the electric machine to work.
@lizzystitch48429 ай бұрын
My Gemini RUINED & BROKE every single die and embossing folder I put through it! Replaced it with the Switch. Success!
@Marla.2210 ай бұрын
Thick areas are mainly the needle, not the machine
@Marla.2210 ай бұрын
I use interfacing, batting is too heavy and thick and put snaps on the sides. TY
@michellehale896210 ай бұрын
I like the mitered corners!
@elizabethc384210 ай бұрын
It would look adorable if you put a ruffle on the outer side of the straps so it looked like a little girls dress
@hislittlemrs.923510 ай бұрын
Thank you for showing how the markers look. They leave a cheap looking finish, I'll stick to paint.
@normamontano720011 ай бұрын
I love your video. Really empowers people. Do you deal with the bobbin winder? I need help. I replaced the tire but the winder does not turn when engaged
@scrapinmaniac11 ай бұрын
This video may help with your problem. kzfaq.info/get/bejne/p5-ErNmkxpubZ4k.htmlsi=-VrsqWTkJQT5Bhpi
@mmallen201011 ай бұрын
You were definitely ahead of the curve on this one. Now all of them are circular.
@user-nz4ft5rg3f Жыл бұрын
Measurements
@prajadhi2397 Жыл бұрын
hi, I have this machine, but I don't know what the needle size is since it broke off, do you happen to know what the needle size is??
@normajohnson1772 Жыл бұрын
Thanks for sharing. It is beautiful ❤🎉😊
@Jasmine-Jeane-H Жыл бұрын
When you held things up to show the detail they were too far from the camera.