how much do these jacks cost?

I'm curious if you can do the same situation without a key if you can turn it into the on position without the key will that still work how would I bypass the system because I bought a car that the ignition was damaged and don't have the key trying to bypass it is there a way

Manny, You Nailed It!… Thanks for the video this was exactly what I needed.

How tall are your pickets

Thanks alot.

Can I buy you some beer? It worked.

40 is how many are in the pack.....

What system do you get the service manual sheet?

Awesome video, thank you. Question: The posts are 2 3/8 in. diameter and 8 ft. long as you stated, is this the same as chain link posts? Also, can you use a T post driver instead of doing concrete? I need to build a 20 foot long fence at least 6 feet high, would a 6 ft. long post be enough?

Hello. I have a Toshiba window ac I just got a month ago. After 2 weeks of it working great, now it'll stay cool and mid-day it'll blow out hot air. Compressor will turn on for about 6 to 8 min and off for longer making my house very hot. What could be the problems? :'(

Hi Manny, what do you think about using a jigsaw for cutting?

your new one is a 1 pole. the old one is a 2 pole which is why a jump was needed to turn a 2 pole into a 1 pole

Appreciate this content 🎥

You the man keep up great work

What is the diameter of the hole per post?

Wow! I am beginning the process of building raised beds out of pallets (they are brand new and untreated ( I get them from a liquor distributor; they leave them out for anyone to take). I have been trying to figure out how to do this because we have a lot of deer but don't want to spend much money to cover. This is a great idea; thanks so much for sharing!

What is the connector call with the blue tape?

Good job ,where did you buy the posts and brackets ??

Great video you taught me the proper way to use it .I didn't know about the stops for repeat cuts, and to extend the foot to balance it. And the adjustable leg for unlevel ground .Thank-you 4:01

dope dude. thank you

What about if only beeps but not turn on? thanks

Just save up and get the thousand pound platform lift. You will lift 500 lbs more and it's height at maximum goes up to 34 inches. That way you don't have to modify anything and you will have everything your trying to accomplish with the 500 lb lift. Makes sense to me. Haha

How do you attach a 90 degree corner with those brackets?

💯💯💯👌Thanks Thanks

Hey manny just ran into your videos, I myself have the same jack and problem. I see that you went ahead and use the original O-ring. How’s it holding up? I’m going to look around to see if I can find a better repair kit, since the one you referenced has a different O-ring. If not I’ll order the same, thank you for this informative video. This saves me a lot of time and hopefully I can complete the task as well as you did.

Great effort bro

What Is the diameter of your posts? How long are the posts

Thank you for this!!!

Hey Manny, what was it actually doing wrong before you started rebuilding those parts. what was it doing or what was it not doing? Thanks 👍🏽

So why did you disassemble it that far only to leave the center tube and bottoming plate in there? There's oring and a gasket hidden under there..

Excellent video, Manny! I don't think I'm mechanically inclined enough to do this and to hire someone would cost more than the GE 5000 BTU air conditioner that I bought last year here in Sarasota.

Hi sir do you know ware ii can find the swivel wheels for that floor jack?

My Window AC is new only used for 3 months. All of a sudden not cooling although it blows air and seem to be working ok the compressor doesn't seem to kick in. Would it be a faulty Control Board?

My unit will run on dry mode but if i stick it on cool mode the fan shuts off and compressor kicks on. What could it be? My capacitor is showing good

Hey manny so I super glued the button because it kept falling off , but now it’s stuck pressed in ?

Did you cap the bottom?

Hello I have a question so my brother has a 2013 kia rio just like urs and he has almost the same issue not sure if yours would bog when starting the car were it would stay on for a little and start to shake and turn off he has changed his o2 sensor already and still does it seems the mechanic can't find the issue has check engine light for o2 sensor bank 1

Mine is doing it cold

Manny you did an amazing job explaining how to repair this and letting us know all of the parts and the part numbers. I wish more people would take the time to do quality work like you just did. Thanks again bud. Keep up the great work!

Looks great! Thanks for sharing! How many bags of concrete per post hole?

That tiny little tree and your having issues? I can forget it I have many roots. I have many (forest) trees with roots that are coming up within the whole backyard. They even lifted my brick patio so that now water comes towards the back screened in porch causing a pool under the porch each time it rains. One of the trees is so large (Much larger than the one you are showing - more than double) roots went beyond the fence into my yard and has lifted a corner of the back screened in porch. Looks like when the fence was installed they just laid it on top of the roots. Seems I need some kind of steal top that can go from post to post (length of each section) to keep the fence steady. Like I mentioned it is just laying on top of the ground. It is so bad the next door neighbor's dogs pushed a section of the fence down. Unfortunately, I live in a HOA that requires this fence. Please help

Curious, can an empty 134a self sealing can be used to recover some refrigerant from the high side with compressor running?

Hey Manny, I've got an Australian 2002 NB8B which throws the error code 1345. I purchased bot a crankshaft and cam angle sensor. Replaced the cam angle sensor to no effect, so next is the crank shaft sensor. Your instruction videos are great. The thing I don't understand is the rotation of the crankshaft (5:30) onwards. How do you do that? An then...I understand that you have to get a tooth facing the sensor to set the distance but why do you have to rotate it back into its original position?

I buy cars from auctions and have rebuilt many of these 1.6 engines. All you need to do to depressurize the fuel rail is to loosen the hex nut on the high pressure pump that is mounted on top of the valve cover. About a teaspoon of fuel will dribble out to depressurize, then retighten the nut and your good to go.

Thanks a lot for this video

You’re a god sent.

👍

Im on my second one for drywall in 2 years just quit working I think they are crap I don't see nothing wrong but maybe I'll take a closer look but never will I buy this brand again just garbage

Very creative. I bought a button on Amazon and put it in but the button is stiff. Maybe the rod it pushes needs lubrication I'm not sure.

Engine Start switch is a momentary switch