JR's Garage

Пікірлер

@Ndzila-pl6qw 2 күн бұрын

great video.... does Heat control valve also responsible for cold air? ...from SOUTH AFRICA

@JRsGarage 2 күн бұрын

No, it only controls the hot coolant going through the heater core.

@welcome2wyzard 4 күн бұрын

Works for BMW 2013 3 Series. You're literally a god

@JRsGarage 4 күн бұрын

Happy to hear that it worked for you.

@jebohim 5 күн бұрын

Did You solve the problem with temperature diffrence in vents?

@JRsGarage 5 күн бұрын

Yes. The refrigerant was low.

@jebohim 5 күн бұрын

@@JRsGarage Thank You very much for answer🤠🥰. Greetings!

@Manchild..dadchild 10 күн бұрын

Bouta dig in 2 this lil biddy!! On the finest fri the day !! Hot as f!!

@kamimaza 11 күн бұрын

The fuck is cabin air filter $128, it's literally 3 tabs to push on a Sportwagen...

@JRsGarage 8 күн бұрын

Highway robbery.

@rayvanderkleij6100 19 күн бұрын

Your also supposed to keep the transmission temp between 35 and 45 Celsius using a code reader with live data. If you get transmission too hot the fluid would expand to much and your fluid will actually be low. Good job otherwise. Being low is just as bad as being too full.

@mikereinhardt5882 23 күн бұрын

Learn from his mistakes. I had excess adhesive from old one, used goo gone to get rid of it. Plastic razor blade was clutch to have as well. Lay it in the sn for sure. Super easy.

@JRsGarage 23 күн бұрын

Thanks for the comment.

@AirsoftTeamOSMD 26 күн бұрын

Doubtful that stainless steel was the right choice. If you don't use anti sieze it's possible that you never got it tight. It could have just galled. Check out AVE's video on galling.

@micsmith806 27 күн бұрын

the metal clips just push down for quick release no need to pry them outwards

@abeghosh 28 күн бұрын

It's a brilliant video ! Thank you ! This gives me confidence to have a go and tune my carbs !

@JRsGarage 27 күн бұрын

Thank you. I’m in the process of updating this video but I’m waiting on a part from a supplier so I don’t think I will be able to publish it for several weeks.

@abeghosh 27 күн бұрын

@@JRsGarage Hi - Please explain how to set / check the float level please - so much conflicting information - thanks

@JRsGarage 27 күн бұрын

That’s actually the part I’m waiting on. New upgraded floats.

@CasualsCj Ай бұрын

I saw this yesterday and i tried today, thank you man, thank you.

@JRsGarage Ай бұрын

Happy to help.

@KenBailey-wu5lu Ай бұрын

What is the service manual you are using

@JRsGarage Ай бұрын

Amazon - www.amazon.com/MGC-Workshop-Manual-Official-Handbooks/dp/1855201828

@KenBailey-wu5lu Ай бұрын

Can you tell me what service manual you are using

@JRsGarage Ай бұрын

Amazon - www.amazon.com/MGC-Workshop-Manual-Official-Handbooks/dp/1855201828

@shamm6880 Ай бұрын

Following this fix, did jr confirm whether it fixed his issue? 0:02

@JRsGarage Ай бұрын

I haven’t had the leak return since but I also take the time to clean out the drains once a year.

@shamm6880 Ай бұрын

@@JRsGarage thanks for confirming, really appreciate it. What do you use to clean the drains?

@JRsGarage Ай бұрын

@shamm6880 water. Watch under the car and ensure it flows freely out the bottom drains.

@jevonkhashlive2135 Ай бұрын

Hello. Can someone please confirm if the VQ25DE uses the same size rocker valve covers? Thank you.

@JRsGarage Ай бұрын

I doubt it. Put your year make and model into rockauto.com and it should show you the compatible valve covers.

@jevonkhashlive2135 Ай бұрын

@JRsGarage Thank you very much.

@ThePlayerlane Ай бұрын

How did that Dorman pump work? I’m Hearing a lot of bad things about it

@JRsGarage Ай бұрын

It’s been working without any problems.

@ThePlayerlane Ай бұрын

@@JRsGarage I have a 09 bmw x5 30i and just bought the Dorman 599 961 water pump from rockauto didn’t have much to choose from because my car is the adaptive climate 4zone when I open the the lil rubber things that cover the holes I seen lil bit coolant seems like someone returned it idk if I should worry about it

@JRsGarage Ай бұрын

@ThePlayerlane might want to call Rock Auto and complain you got a used one.

@ThePlayerlane Ай бұрын

@@JRsGarage horrible thing is that they don’t have a phone number and they complicated to get ahold of

@JRsGarage Ай бұрын

@ThePlayerlane yea, you have to do it via email.

@user-vp1hh3zt7b Ай бұрын

Thanks! It worked after restarting the phone

@JRsGarage Ай бұрын

Great to hear.

@christophelonguepe8323 Ай бұрын

THanks from France, I was watching all the videos to change my water pump and thermostat and was very surprised to see that it was reinforced... Of course it is a convertible. Thanks a lot for your video

@JRsGarage Ай бұрын

You’re welcome. There are a lot of videos out there on this subject but the 93 is a little bit different.

@adenlewis6256 Ай бұрын

What model is that kubota rtv?

@JRsGarage Ай бұрын

It’s a 2014 X900

@adenlewis6256 Ай бұрын

@JRsGarage ok thanks I'm trying to figure out how to do a brake fluid change on my kubota rtv1100c

@JRsGarage Ай бұрын

@adenlewis6256 it’s probably very similar.

@bobbywarrior1434 Ай бұрын

very interesting video, strange case of uneven temps on vents, glad to hear you fixed it, thanks fir sharing 👍

@JRsGarage Ай бұрын

My pleasure.

@Black_Pearl_68 Ай бұрын

From Lebanon, thank you very much. I followed your steps and the antenna was repaired. Thank you very much

@JRsGarage Ай бұрын

I’m very happy it worked for you.

@TomGallant-rz3iw Ай бұрын

I just did it as shown in video. The hardest part for me was twisting the mirror back on. The great news is IT WORKED! Mine had no discoloring or dirt but I wiped the antenna and parts with an alcohol wipe (for lenses). Very happy and thankful for this video.

@JRsGarage Ай бұрын

Awesome, happy to help.

@TomGallant-rz3iw Ай бұрын

I will be trying this asap on my 2011 E93. After watching this video I put my fob against the windshield on the rear view mirror area and touched the door handle. It locked and unlocked with each touch. I have a feeling following this video will solve my problem.

@JRsGarage Ай бұрын

I hope it works for you.

@ImWankah Ай бұрын

Thanks!

@JRsGarage Ай бұрын

My pleasure.

@nancyfromkingbolen2428 Ай бұрын

Great video👍sir, how can we contact you🤩🤩

@JRsGarage Ай бұрын

If you have questions you can post them here and I will respond.

@DannyGrc Ай бұрын

Gotta do this soon on mine 😓

@JRsGarage Ай бұрын

It takes some time, but it’s not that difficult.

@GentlemanTomcat Ай бұрын

Advice from someone who just did this maintenance! The drain pan bolt closest to the center front of the car is a thru hole so the steel screw can become fused to the aluminium housing making it very difficult to remove. Make sure you apply lots of penetrating lubricant to the TOP side of the hole where the threads are days or hours before you do this job. I was not lucky and the bolt head snapped off, then when I was trying to remove the rest of the bolt the rest of it broke off so I had to drill it out. Thankfully its a thru hole so I was able to put a nut on the backside becuase the threads were destroyed trying to remove the bolt. If you 're going to do this maintenance just flush all the fluid (buy 6qts) , no sense only doing 3 qts if you've got it set up. To clarify to the video, the car needs to be as close to perfectly level as possible, front to back and side to side. You should be flushing the fluid while the car is running and reinstalling the drain bolt WHILE the car is running. if you shut the car off without the drain bolt in place a bunch of fluid drains out and you don't want that. I was nervous about crawling under a running car but that just what has to be done, stay safe. The drain bolt washer has an up-side and a down side, the slooth side without the ridge makes contant with the drain pan. The car shifts way better than before and the fluid that came out was dark black so it was worth it.

@JRsGarage Ай бұрын

Thanks for all the information and tips.

@sc225 Ай бұрын

Hi I was watching this video, My horn goes too. I have not check the fuse yet and if the fuse is good I have to access like the way you show on this video. Mind is 2014 534xi M sport. Since my f32 just like your with an oil cooler and is there enough room to the back and take the horn out ?

@JRsGarage Ай бұрын

There was enough room on my 3 series.

@fraizer2600 2 ай бұрын

Very interesting do we need to change that charcal after some years ? And that dust filter ? :)

@JRsGarage Ай бұрын

You can’t really clean out the canister so once it fails (no longer allows air through freely) then it needs to be replaced. The dust filter can be cleaned off. Neither are part of the normal service schedule.

@Andrewlone174 2 ай бұрын

Great job, preparing to do it outside as i don't have car garage.

@JRsGarage 2 ай бұрын

Thanks, good luck.

@new2me78 2 ай бұрын

I bought an auc sensor off eBay for like $30 cause I didn’t see it on fcpeuro and I’m like if it doesn’t work oh well. It finally arrived today after a month maybe (china) the part was a bit different but connection was the same and my code is gone! Just two more codes to fix. I had 2aaf which I still do. I replaced the pressure switch thing but I still have the code sadly

@JRsGarage 2 ай бұрын

Glad to hear you got the AUC sensor fixed. Good luck on the other 2 codes.

@gerodriguez1993 2 ай бұрын

I'm not sure why the volume doesn't work on the pioneer double din everything else works on my 04 G35??

@JRsGarage 2 ай бұрын

This may help. a.co/d/3YmcL68

@lildrgn 2 ай бұрын

videos like this are why I love youtube. My 17 AT had a puddle on the trunk cover after a storm today. I'll have to check it out this weekend and your video will be my reference. Thank you!

@JRsGarage 2 ай бұрын

My pleasure.

@MrGiovann1 2 ай бұрын

Mine too...these days been raining in Texas like crazy... I'm working on that now.

@JRsGarage 2 ай бұрын

Good luck

@opskier2 Ай бұрын

The same on my 16 AT, the trunk full of water :( . I have seen the hole that is behind the rear bumper was stuck, this hole drains the water....have you find something wrong of your AT?

@JRsGarage Ай бұрын

No, so far the transmission is working well.

@DespiertaVe 2 ай бұрын

I being struggling with VALVE FUEL TANK VENT, i did a bunch of things like smoke test it came out good,no leaks i change the EVAP part that goes in the engine area(2times) and i still cant figure out what’s causing that code.

@JRsGarage 2 ай бұрын

Have you tried replacing the DMTL pump attached to the charcoal canister? I’d try that next.

@DespiertaVe 2 ай бұрын

@@JRsGarage I changed both of them,still can figure out whats causing that problem,because of that my engine goes in to limp mode.

@JRsGarage 2 ай бұрын

Someone commented one time to unplug the purge valve and idle for 10 mins then reconnect, clear the code and drive it around for 10 miles. Not sure how that might help but worth a shot. Are you sure the limp mode is due to the vent valve? Never heard of it causing that.

@DespiertaVe 2 ай бұрын

@@JRsGarage yea, its my everyday car so i can feel it when it goes in to limp mode,after that i get the code 2A1A-Fuel tank ventilation system.

@JRsGarage 2 ай бұрын

Ok, so it’s something wrong with the entire system. Could be your gas cap. You said you tried smoke testing so you have the equipment. Try disconnecting the lines connected to the evap canister and smoke test them to see if there are any leaks.

@boylittle2613 2 ай бұрын

Thanks❤ it works🎉

@JRsGarage 2 ай бұрын

Happy to hear.

@andygrichtmeier9139 2 ай бұрын

I own a 2013 328I hardtop I have the same issue with latch very good information

@JRsGarage 2 ай бұрын

My pleasure.

@icemac1919 2 ай бұрын

hola, algun cambio en los LTFT?

@JRsGarage 2 ай бұрын

I haven’t checked the fuel trim after performing this fix. The CEL has not returned so know the fuel trim has remained within limits.

@mathias7195 2 ай бұрын

✌️ *Promosm*

@JRsGarage 2 ай бұрын

Thank you.

@borislin1156 2 ай бұрын

Does it work on bmw e93 2009 ?

@JRsGarage 2 ай бұрын

Perhaps. Please let us know if it works for you.

@eduardoolivares223 2 ай бұрын

En iphone como puedes hacerlo ?

@JRsGarage 2 ай бұрын

I do not know if it is possible for the iPhone. Apple may not allow the changes to the Bluetooth settings. I am not familiar with iPhones.

@eduardoolivares223 2 ай бұрын

A okay, gracias disculpa sabes si hay forma de actualizar el apartado donde dice servios BMW a connected drive ?

@MGC.GT.1968 2 ай бұрын

Hi JR Thanks for making these MGC videos, as you already mentioned, these engine restraints were an original part fitted to our cars, however over the years they get removed and left off. As you said their sole purpose is to stop the very heavy engine/gearbox from sliding forward in the event of a sudden stop/accident. I also purchased mine from Simon at Colne Classics in the UK, one of our top specialists on MGCs.

@JRsGarage 2 ай бұрын

My pleasure. For a couple years I didn’t even know they were supposed to be there.

@siodanuk4709 2 ай бұрын

Ditto@@JRsGarage

@naughtystepbro415 2 ай бұрын

Just done it, mine was exactly the same I had to be touching the car for it to work and mine now works , Thankyou so much 👍

@JRsGarage 2 ай бұрын

Great, happy to help.

@fleipeg 3 ай бұрын

Just followed your DIY video and fixed my 2011 E93 cabrio glovebox. Thank you 🙂

@JRsGarage 3 ай бұрын

Outstanding. Happy to help.

@shrkys4 3 ай бұрын

Nice Video! I just picked up a 2010 335i e93 that desperately needs this... Thank you!!

@JRsGarage 3 ай бұрын

It’s not as difficult as you might expect. Good luck.

@user-yp3xg6ow6y 3 ай бұрын

Thanks!

@JRsGarage 3 ай бұрын

My pleasure.

@Iamablackkid 3 ай бұрын

This video is very informative thanks

@JRsGarage 3 ай бұрын

Happy to help.

@Iamablackkid 11 күн бұрын

@@JRsGarageHow long did it take you to install?

@JRsGarage 11 күн бұрын

@Iamablackkid a couple of hours including the modifications to the bezel.

@Iamablackkid 10 күн бұрын

@@JRsGarage Really I got charged $400 JUST to install AND they took around 4 hours 😠

@JRsGarage 10 күн бұрын

@Iamablackkid ouch

@rulee30 3 ай бұрын

Do you need to bleed the coolant system after replacing the valve?

@JRsGarage 3 ай бұрын

I lost very little coolant so I just drove the car and checked the reservoir and topped it up over the next few days. If you lose a lot of coolant you will need to bleed the air out.

@Brok3n_54 3 ай бұрын

I’ve had fuel dump into my canister 3 times now …. Any ideas?

@JRsGarage 3 ай бұрын

Is there any pattern to when it happens? Perhaps a blockage somewhere causing the fuel itself to leak into the canister instead of just the fuel vapors. Or topping up the fuel past the pumps automatic shutoff?

@Brok3n_54 3 ай бұрын

eveytime its happened ive been at the pump and its cut me off half way.. this last time i had gas pouring out from under the car at the pump... i had my canister plus the dmtl pump replaced last year(for the 2nd time) and it just happened to me again about 2 weeks ago. im using a stage 3 precision autowerks fuel pump which might be the cause of all this but i dont see how. i might just go back to stock pump to test it out but im just so lost at this point haha@@JRsGarage

@Brok3n_54 3 ай бұрын

a shop also ran a smoke test on the evap line and said it was clear so i dont whats going on@@JRsGarage

@gizmox8319 3 ай бұрын

Wha if im not planning to use the bose system can i still use this and then connect the amp with the stereos RCA?'

@JRsGarage 3 ай бұрын

If by Bose system you just mean the head unit then yes, that’s exactly what this is meant for. If you mean both the Bose head unit and amp and you plan to use an aftermarket amp then you’d need additional wiring to splice it together.

@samfusaro97 4 ай бұрын

Great detailed video. What transmission code do you have?

@JRsGarage 4 ай бұрын

SCV, thanks.

Ең жақсы KZfaq

Пікірлер