I feel like Neo in the Matrix movie when he gets kung fu downloaded into his brain. "I know how to lay block"
@terrywawro2951Күн бұрын
Wow. Clean, clear, concise instructions for a beginner, telling me everything I need to know and nothing I don't. All without distracting music or graphics in the background. Well done sir. Well done.
@MT_HomesКүн бұрын
Well thank you for the nice comment!
@simardssurveillancesystems8209Күн бұрын
Thank You For Making This Video, Very Detailed & You're About To Save Me Alot Of Money, As I Have About 7 Windows To Do.
@MarkdWallis2 күн бұрын
Thank you!!
@sydneymcconnaughhay59473 күн бұрын
Cool video,, your a good teacher 😊😊
@MT_Homes2 күн бұрын
Thank you!
@aizenespiritu20533 күн бұрын
How much did it cost you for the glass?
@MT_Homes3 күн бұрын
$70
@aizenespiritu20533 күн бұрын
@@MT_Homes where did you order the glass??
@MT_Homes3 күн бұрын
@aizenespiritu2053 I ordered it from my local auto glass shop.
@richardwolske20155 күн бұрын
Great video, wonderful craftsmanship 👍
@ElkinVogt7 күн бұрын
Most excellent. You are a great instructor. Thorough and easily understood. Thank you!!!
@annemarievino139515 күн бұрын
Great and very informative video
@rbinkoriffic999916 күн бұрын
You saved me dude ! I was gonna replace the whole unit because ive never had luck ordering a just the sash. Im gonna pull the broken sash, fit a piece of styrofoam in the frame for now, this way I can just walk into my glass guys place with the old glass and say make me one of these please...lol
@Backlashed20 күн бұрын
Is tape always the best option for the new glass? I've heard some say silicone should be used, when and why would either one be better?
@carlosbedoyaortiz579225 күн бұрын
Thanks, Now I need to figure out how much to charge 🤑
@TGS2AUSA202427 күн бұрын
Great video. Easy to follow. I like the shim measurement/notes tool. Going look into doing it my self. Thank You
@turrubiartes9Ай бұрын
Awesome. Thanks
@jody6121Ай бұрын
Good video...music is aggravating as shit
@SteveSiricaАй бұрын
That looks great. Nice job.
@MT_HomesАй бұрын
Thank you!
@tomasleom9464Ай бұрын
1000
@albundy9236Ай бұрын
That was cool!
@tonysierravista2280Ай бұрын
Well done
@xvnvx4475Ай бұрын
First off I want to say I love the video boss thank you for the information I just had a question how do you find the measurement for each piece of gamble? For example I had a 10’ wide wall and was wondering how to find those dimensions.
@MT_HomesАй бұрын
Thank you. That’s a great question but unfortunately the answer is very complicated and would be difficult to explain here. I will put it in the list of video tutorials I need to make.
@succpremesoy9917Ай бұрын
Saving this for when I have a wife that wants a shed 🙏
@huxmetalworks7371Ай бұрын
Great job this is what my wife wants for our yard the problem is I'm no carpenter but following you it could be possible thanks for sharing
@GeorgeFriesen-te2gzАй бұрын
How do you close off the bottom the the corner trims?
@jkwo2007Ай бұрын
Am I impression correct that there are more than one kind of metal roof panel profile outthere? If yes, are there also a bunch of various form closure strips outthere for choosing one to match?
@i12bgood2uАй бұрын
Thank you for your time
@idonthinkso372 ай бұрын
my other - unbroken spring had 218-25 stamped on the spring, made ordering the replacement easy
@kveldgorkon46112 ай бұрын
Great Video and Detailed Instructions !! .. Thank you
@user-uj1kw7fx6t2 ай бұрын
What is the item number . Want to make sure this the correct shoe
@MT_Homes2 ай бұрын
I updated the description with a link in it.
@Spicly1232 ай бұрын
Very good video! Easy to follow instructions! THANKS
@MT_Homes2 ай бұрын
Thank you! Glad it was helpful.
@iurunner342 ай бұрын
Ive been watching a lot of these shed videos and im a newbie so forgive my ignorance. Do you need to attached the runners to the pads? If yes, how? If not, why not? Thank you!
@MT_Homes2 ай бұрын
No. In my area these sheds are considered portable and are never anchored down. If you live in an area with very high winds or codes require it you may want to anchor. If I want to anchor it down though I wouldn’t use pads like I did here. I would want an anchor rod or concrete pillar at least 3-4’ into the ground.
@iurunner342 ай бұрын
@@MT_Homes thank you!
@FalkFluegel2 ай бұрын
That level of comprehensive practical advice is exactly perfect. Many thanks
@MT_Homes2 ай бұрын
Thank you!
@fishydubsfishing65163 ай бұрын
You look like a professional tin knocker and you don't have an electric sheer
@seancasey1803 ай бұрын
So the link has expired, is there an updated link? What’s the best sole pattern? Thanks
@MT_Homes2 ай бұрын
Thank you for bringing it to my attention. I replaced the link with the most similar on I could find. If you go to skechers’ website and type in “men’s vigor” it should pull up multiple options. The vigor line appears to have the same sole as I use.
@joemulhern3 ай бұрын
Absolutely amazing video. This is what KZfaq is meant for!
@nataliekealoha86243 ай бұрын
Thank you for the tutorial, you made it look so easy.
@johndrewek32413 ай бұрын
You should’ve bet the ends over it makes it nicer looking job you don’t need that bent on the end
@ohiodigger43913 ай бұрын
Are the 2x4 floor joists strong enough? Especially with only the 2 skid runners? I’m planning on building a 12x16 shed and was going to use three 4x4 or 4x6 skids and 2x6 joist 16 o.c. Or is that going to be way overkill? I will be putting at least 2 commercial zero turns in there over the winter.
@LukesGarage3 ай бұрын
My door is big and has two springs. Is it common for the springs to be different lengths. The one that broke is 22” and the other is 24”. I measured multiple times.
@The_El_Guapo3 ай бұрын
I'm new to all this, but based on my research, the spring that isn't broke still has tension and is probably the one measuring shorter. Both springs need to be completely decompressed for an accurate measurement.
@LukesGarage3 ай бұрын
@@The_El_Guapo Appreciate the reply, I paid someone to do it. Wasn’t t worth my time or safety to try to attempt.
@The_El_Guapo3 ай бұрын
@LukesGarage I removed both my springs last night. I was blown away to find out someone had installed a 24" spring on the right, and a 26" spring on the left. No surprise it was the 24" spring that failed.
@biistatra93 ай бұрын
Great video but music is not necessary.
@kvantimm4 ай бұрын
Pretty sure you’re not supposed to put a boot over a seam.
@MT_Homes3 ай бұрын
Pretty sure I didn’t put a boot over a seam. You’re talking about a rib, and yes this boot is designed to contour over top of a rib.
@m.g.hopkins13304 ай бұрын
I really enjoyed this video! The detailed information was very helpful, especially the clear supply list in the description. I look forward to watching the rest of the series. Could this shed be moved in the future, or is it something that would always have to stay where it was built? Thanks again for the helpful info!
@MT_Homes3 ай бұрын
Thank you for the nice reply! Yes, one of the handy things about this type of shed is that it can be moved. We have several companies in the area with equipment and trailers designed to move sheds. 2 things I would do different though if I thought I might move it someday. One, is put an extra set of runners underneath at the same width as the trailer. (8’, I think) Two, is possibly shorten my sidewalls or flatten the peak so it’s not too tall to fit under power lines and bridges when hauling it on a trailer.
@SHRI_the_DIY_Warrior4 ай бұрын
You did such as wonderful job Mr!
@migueliles19024 ай бұрын
Absolutely fantastic. You're a lifesaver
@nianlisang75184 ай бұрын
nice job!
@Call_of_duty_beast254 ай бұрын
Excellent video you just saved us a ton of money Bud. Thank you.
@RedQueensJubileeClub4 ай бұрын
Very well done video. EMS had to break into my house one night when I was having a diabetic seizure. My nephew and I have been working on replacing the broken glass from the inside door. After watching this I feel much more confident that we can do it. Thank you.
@catwoman25964 ай бұрын
Nice video except for the music.
@nlemmer4 ай бұрын
Thanks man! Building my trusses now. Awesome videos!
@davidstewart27614 ай бұрын
This was the best video I’ve found about this process!