2 whole minutes intro, very annoying music and not what I was looking for this video has it all when it comes to being horribly done.
@PatrickCooperPhotography-nw1pp3 күн бұрын
Alternatively, would I need a white underbase if I was printing green ink colour on a medium blue t-shirt? I would prefer a black t-shirt but as I'll be using a crude DIY setup, there's no way that I could get perfect registration for a white underbase.
@PatrickCooperPhotography-nw1pp3 күн бұрын
I'm planning to do some screen printing at home with black t-shirts. So I'll likely have a crude DIY setup. I would think that a white underbase requires perfect registration and it's unlikely that I'll be able to achieve that with my setup at home. So no white unberbase for me. However, from your video, it sounds like I might be able to get semi-vibrant colour by applying more ink than usual? Maybe I'll try three passes and see how that goes. Yes, I would be using more ink (which might sound wasteful initially) but I'll only be using a single colour (green.) At least I won't be buying two ink colours for each t-shirt print (white and green.)
@christophecreations6088 күн бұрын
What are your exposure times and what do you use to coat your screens?
@joshisterrific8 күн бұрын
@christophecreations608 I've been using Baselayr Plastisol emulsion, it's 20 seconds for a 156 mesh.
@amylouisesmithart10 күн бұрын
It would be nice to have that shirt and hang it up, like in a frame in the studio to show clients.
@aclassic508715 күн бұрын
This guy talks too much, just get to the reason I clicked on here
@joshisterrific15 күн бұрын
@aclassic5087 just go somewhere else lol
@crackshotscreenprinting16 күн бұрын
I did that with my 8.5x11 for a long time then I found a used 19x13 printer for a good price and went with it and I am still using it four years later.
@JadenWhetzel26 күн бұрын
Hey bro! Has this worked for you still a year later?
@thriftteavintageАй бұрын
I’ve always found it the screen print has bubbled or any texture to it and then you fold/ scrunch etc before dying it penetrates under the ink and causes the staining. I find it can eventually clean off from washing / wiping but sometimes it’s just like that!
@natnaelberihu4234Ай бұрын
goed one
@NesscesityАй бұрын
Hello. I am going to build one myself and this video is very helpful….what thickness is the glass????
@bronsonosborne3962Ай бұрын
garbage
@WhenHarryPwnedSallyАй бұрын
Thanks man. Would it be wise to cross ink brands? For instance, mixing this wilflex soft base (or wilfex curable reducer) with a rutland black ink?
@BanilyaGorilyaАй бұрын
This is great! I work in a sheet metal shop and you’d think they’d encourage an employee discount from a build it yourself standpoint but noooo. Anyways I invested in that Sgreen washout and had the company make a dump sink that had brackets set inside to add the screens and brackets on the side for filter placement and lockable casters for easy transport and mobility. It’s all knockdown construction too so it can be disassembled if I move or need to ship one out for maintenance.
@kimages36022 ай бұрын
Great Job!
@wahyu80532 ай бұрын
alat penghangatnya namnya apa di online
@rhyan-wi1nz2 ай бұрын
Hi like your the way you post your video about screen printing you are humble and thanks for the video
@ZachBugay2 ай бұрын
Tremendous video. Excellent. Thank you!
@heavyinkprinting13672 ай бұрын
Nice
@yemarican2 ай бұрын
I'm like you man.. I build my own stuff.. I dont care how many times I fail.. it doesnt matter. I eventually get it done (my way).
@leviteapparel3 ай бұрын
🎉🎉🎉nice 👌🏿
@VerguillasBC3 ай бұрын
What brand of emulsion do you use?
@SolarSoftMedia3 ай бұрын
I enjoyed learning how to make a texture. Doesn't suit my purposes well. Since the texture (in may case), may need to be tiled, I would need seamless edges.
@Buulab2 ай бұрын
Depending on what texture it is, you can make it seamless by offsetting it to half the textures resolution and cloneing and healing the seams.
@SolarSoftMedia2 ай бұрын
@@Buulab ok. Thank You.
@lesimages3dclic3 ай бұрын
Ah yeah, that toy is a total piece of crap lol.
@TheRealRodStickler4 ай бұрын
Very cool I have to research pre-roll now because I have wanted something like that for so long.
@TheRealRodStickler4 ай бұрын
I would recommend keeping a hard copy for the legality of it. There is a case in international court that covers copywrite (you can look it up) sometime I can remember when but maybe like 2010 or so maybe I am off. The original ruling was challenged and as I read international courts said if you own content (a movie DVD for example) you have every right to back up that content (digitize it). But keep in mind the phrase "if you own it" so if you are concerned with the legality of it all I would suggest you retain your hard copy and to save space buy a large CD/DVD binder and toss the bulky individual cases. But hey thats just me.
@TheRealRodStickler4 ай бұрын
Been Plex Pass doing my own media server since 2016 I have a rather large collection and I just like not having to worry which streaming service has the rights to what ever movie i want to watch at that moment.
@russtaka4 ай бұрын
Are you drying with the heat press? Nice setup.
@joshisterrific4 ай бұрын
Yeah, just a heat press. Not ideal but it's good for a quick and easy setup.
@russtaka4 ай бұрын
Thanks for getting back. If it works, it sounds good to me! 👍
@joat_dad40904 ай бұрын
That's a nice printing shop. Mine is in the garage too but filled with other junk. I'm building a drying cabinet stacked on top is my exposure unit, then stacked on top of that is going to be my glass art table which I plan to install an actuator to tilt it. The exposure unit is going to sit on a tray which I could slide out in order to lift the vacuum cover. Trying to save on space because I've got home-improvement shit all around the garage. I plan to build a shed in the backyard to move all that junk out, to have a decent looking printing operation in the garage. BTW, I've had a Riley Hopkins 4 station/ 6 color press for 7 years now. One of the knobs broke off of the adjustment clamps, after first 2 weeks of use. So, brand isn't everything..you'd think something solid as a RH machine would have good tightening knobs.
@joshisterrific4 ай бұрын
My old Riley Hopkins also had a couple broken knobs, which was a bummer, but luckily Ryonet sells a replacement kit with spare parts like knobs/springs/etc.
@sagrgywejhxcvx4 ай бұрын
too much white in intro
@leviteapparel4 ай бұрын
🎉🎉🎉😂😂 It's been a whole lot of while, but I appreciate the videos. Keep them coming.🔥🔥🔥
@fishbrownconnect79274 ай бұрын
This is how black metal is recorded....
@PanettaDesignCo4 ай бұрын
This is a great video brother! Will use this for future clients for sure
@icandoooit34374 ай бұрын
Is the film is tdf film 😭😭 please tell me
@elainecongo38275 ай бұрын
I'm just seeing this video and was in the mist of working with a White under base and had did a sample and found the Red I'm using pops better with the White under base...without it the color looks dull and flat
@joshuajenniges58305 ай бұрын
Glad you're back! I recently moved to a new place and purchased an Anatol press as well....but mines the Anatol red. I have no complaints with the press... Looking forward to more great content.
@joshisterrific5 ай бұрын
Nice!
@joshuajenniges58305 ай бұрын
Awesome! Recently bought an Anatol press as well. Congrats on the new press!
@rickwaller71565 ай бұрын
Did you have to special request the blue? That's nice!
@joshisterrific5 ай бұрын
Yep, they offer a custom paint job for an extra cost. Wasn't feeling the red.
@dgoddard5 ай бұрын
Glad to see you back. I've left screen printing on the back burner. But I did open a full-blown woodworking shop as my "side gig".
@heatherjennings1455 ай бұрын
Glad you're back!
@Nikhiludan5 ай бұрын
long time........
@nobonesclothingco5 ай бұрын
Nice set up!
@i.b.lancer5 ай бұрын
Terrific to have you back Josh. 😂
@joshisterrific5 ай бұрын
I see what you did there
@pkilla6175 ай бұрын
Very nice press congrats on the new house
@wagyu_killer5 ай бұрын
tornado?
@joshisterrific5 ай бұрын
Yup!
@Ramellosugahill5 ай бұрын
Looks good
@AngelaScene185 ай бұрын
You could have got a professional unit for that price
@joshisterrific5 ай бұрын
Sure, a smaller one. I wanted to build a bigger one, and those can go for well over $1200. The point is you can make your own as big or small as you want for much less than the professional one will cost.
@yungnflashytv5 ай бұрын
The 2 trips to Lowes was felt by me lol
@melodi87675 ай бұрын
The good old Windows Paint program can print an image on multiple sheets with a few clicks in the print setup. Just need to trim em up after printed.
@joshisterrific5 ай бұрын
I need to try this
@madchem1845 ай бұрын
Just this precisely this two days ago, works like a charm
@miguelsemidei76196 ай бұрын
Follow up video ??
@JumpingJack66 ай бұрын
Don’t convert MKv files into MP4, eeegads… Plex handles MKV just fine and so do all your devices. Using handbrake to transcode your MKV is fine if you are trying to simply compress the file size down (accepting some degree of quality loss) you can leave everything in MKV format.