Hello beautiful ring. Cam i ask what dod you use to solder with ? I know you used some flux from what i could see. But i didnt see what you used to actually solder it with. Thank you hole you can answer.

why you have given 1000 in stopwatch

Does anyone could guide me to the cable, that could be used to power SATA hdd from male PCIE 6 pin connector.

Please give your address

I want ring copper, logo is "om"

Beautiful!

i can make a pre preg carbon fibre ring in about 15 mins total time spent

Фуги сведи плотно иначе шов разорвется потом😮

does anyone know if the builder 500w CPU is compatible with a sata ,6 pin

you need to plug them in separate rails

How cool❤ had to buy an expander to try my self... but the copper keeps breaking😢 why is that? Im using a 15mm copper that I need to expand to 17.6mm is the strech to much, or am i dooing something else wrong? Hope someone can enlighten me❤

This didn't work for me. After I made the path around the object it didn't select to crop it from the photo

I have a question: I want to upgrade a HP 6300 PRO MT, with a i5-3470, 16 gb ram (4x4) ddr3 1600mhz, a SATA SDD of 120GB and a 1TB HDD, and a MSI GTX 1650 SUPER GAMING X, my question is, This adapter will work? i guess the psu of that computer is 320w and hp certifie that this PSU is higher eficent en energie consumpt, so, it will work? PD: Sorry for my bad english

May god give long life to our parents ameen ameen

nice

Hay this is Amazing neat project. Say question my Dad says Copper will make my finger back is this true?

Why not START with a copper sheet and avoid all that fussy business cutting the pipe?

Helpful, thanks.

I have an rx 5700xt is this do-able

thank you !

is this safe? is it safe to use 3xSata to 8pin? can i use 2xSata to 8pin?

Can you please make some couple of rings for me and my girlfriend

Can we use one sata Power !??

Thank you. You save me some time.

Can I ask why you didn't just cut a band from the ring and just use that rather that flattening and reshaping it, or is it purely due to the diameter of the pipe?

You have to ask yourself though, why does a regular 6 pin have 3 yellow wires (12v) and 3 black wires (ground) and I am only using 2 of each wires? Some people even cobble together an adapter where only 1 yellow wire is used. The PCIe slot can deliver 75 watts, so if a GPU has a 6 pin connector, or especially an 8 pin, then it's a higher wattage GPU (some well over 200 watts) and will suck quite a bit of current (amps). PSUs have several built in safety devices, but as long as the total power output isn't exceeded the PCU will not shut down. Thus, it can't tell the difference if the load is coming from the device via adequate number of wires, or a red hot single or double wire on fire because it can't handle the current. The wire basically becomes a resistor and gets hot AF. If you know what you are doing it's fine to make your own adaptors. If not, bad things can happen.

Wont 1 power gpu or do u have to use 2. They sell single ones

Where are the other wires that it connects to

U might wanna invest in a new hacksaw blade

I found on corsair website that the sata to 6 pin adapter can supply 54w

Thank you!

Great end result acheived via some questionable skills. I feel sorry for your poor mandrel getting sanded to oblivion.

when i trace my object and get to the end, it colors the entire object black.

I'm searching around for the cutting blade

Wow beautiful. A must try

why didn't you just cut the pipe?

can you please send this ring to my loaction ???

Thank you for sharing

I can’t quite tell from the video. But, I think you might have your hacksaw blade in backwards.

That was helpful, thanks a lot

Couldn’t you just sliced the pipe instead of all that extra work cutting it heating I making a sheet and strips? There is different pipe diameters 🤔.

Thank you!

Wow, I can't believe I didn't know how to do this! Glad I came upon this video.

Excellent! Thanks!

You already had a ring when it was a pipe. I don’t get the cutting it open and then brazing it back.

Kinda doin things the hard way, huh?

Use a pipe cutter. It’s so much easier and makes a better cut

Thank you for this! I now have wastewater treatment plants on a map, haha. Great tutorial, thanks again!

very helpful