Thank you for comparing it to the digital test. Its great how close the bench sync can get!!

Didn't think to pass this on when I did it to mine, of course that was in 1968. Get the old metal trigger group housing and pins that fit tight, also get the bolt stop replaced with nylon rather than the metal pin, you will thank me later when you don't hear the clatter of the bolt stopping and wearing out your receiver.

Damn first time hearing this

Cool but sounds noisy! Is it the transmission or the chain part? Or perhaps the camera just pics up that specific sound.

This is one reason I like my air cooled Honda 2.3hp. 👍

Hey buddy, I was just wondering what size is that sprocket and that wheel in the front?

Sir how to do reverse setting

I have to install a new breaker, what do you have to do to do this?

Thanks

yes, but it's no use, consumption remains the same. So a good converter and it's a good thing...

Thanks! Good info.

had my Surron for a month and the brakes on the rear are gone at this point, at least I think so, bc I bled them, sandpapered my brakes, cleaned with isopropyl alcohol, and cleaned and sanded the rotors. The brake levers still feel mushy and when I look at the pistons they barely come out, please let me know, do I need a whole new brake system.

Is it possible to supply only 12V to the router board? I suspect the router board takes 48V as an input from the AC/DC board. There must then be a 48V->12V conversion happening on the router board. The 12V is used to operate the router functions, and the 48V is not used on the router board other than to supply 48V over PoE to the antenna. I know for a fact that you can supply only 12V to the antenna (see Oleg Kutkov) by separating ethernet and power supply. So I'm guessing that it should be possible to forego the AC/DC board, supply only 12V to the router board and to the antenna, and avoid conversion losses.

Using the relay. To be clear on relay # 4+ and # 3- go to battery. # 2+ goes to throttle + and #1- goes to - led ground. Ok On a 3 wire break light, black ground goes to number #3 but where does the red and yellow wires from tail light go on the relay??? Thanks

That did the trick. Thank you sir

more dumb shit click bait

no matter what nothing will ever be done about anything

Top secret.... um yeah but why make it a secret. Lasers are fun.

Have you done moths?

New cars suck big time!!!

What? You flipped your catamaran and so you decided to get rid of it? You didn't make one video about it since. If you don't want it that bad. I will take it.

Wondering if this will clamp onto a Hobie H rail?

HI. Thank You for this tutorial. So, i have problem with my EM_150/180A. Any way to connect with software. I thik that firmware is corrupted. Could You send me Your on priv, please?

"bo" fang? Is that a regional pronounciation of "ba"? :-)

Very interesting

yamaha has the same "trick"

When I’m pushing my piston in the other comes out so I can’t get them pushed in enough… any advice

Cheers from down under

3 years late but is it possible to share the blueprints or how to on this puppy? Thanks for making the video

I have an 03 Accord and a 99 Tacoma. An idiot like me can take care and work on them easily. My mother has a 2022 Forester, and my girlfriend has a 2021 Kia I hate those things. I fear the day when I may be forced to be a modern car.

You’re a bad parent. Have a nice day. Hope your kid doesn’t die.

You're stupid, that's how you lose a kid In my old neighborhood, one of the neighbors had a toddler who was playing with the car while it was running and he managed to pull it out of park and reversed it straight into a highway through the fence down the hill into A. Foley pack highway Tyler did not survive.Neither did the person in the diesel that hit him

Y do find this to be ok

Aww 😂

OMW.....So after work today, I played with my settings. In the never ending quest to find settings that will make my ebike mimick the feel of a CR 125. Welp, I was on page 3 and decided to enable moving vehicle booster. I tried the stock #10 setting and not much. I then set it to 30. That's all I did, and wrote it. It flies. Moving vehicle booster Speed ratio is all I touched so far. it's got to be the secret setting no ones talking about.

2 of the 6 wires (red and green) have snapped off one of the connectors to the battery due to rattle of the battery how may I go about fixing it, the snap is at the bottom of the wire very close to the plug

i agree i prefer tactile and physical things rather than switches and big screen. physical handbrake, transmission stick, keys. tesla won’t even give you a windscreen wiper stick

Not a car it’s an appliance

new cars are awful

I knew when I got my 2016 F-150 the parking brake button would fail at some point. Not even 8 years old and I'm waiting for a new switch to arrive in the mail. $60 for a plastic switch that probably cost $2 to manufacture and transport. I wish a company would engineer a manual parking brake conversion, there was zero reason to make it electronic.

Shoulda got a ranger

I'm only 23 and I hate new cars too, all the electronic things can go wrong so easily. I'll keep my old landcruiser as long as I can

Let’s be friends. New cars suck.

what size off revit nut?

Yes a pull up handbrake i too like the reassurance and the clicks

That's why I bought a GX 460

karen is a douce for this crap

Say you're getting old without saying you're getting old

Get a Tesla you'll have none of that BS.