@@johnrobert6821 thank you. You should check out my newer videos on it. It's all broke in and tuned with the right springs.

@jondavidmcnabb yes a few. I run a dara competition drop offset holster with just minor trimming with a dremmel to fit the compensator flawlessly. The holsters I have made for a glock 17 with olight pl pro valkyrie. Then trim the bit that I need for the comp.

@Awkwardshooter thank you bro. It's definitely a project.

Honestly iv heard of them sending those springs for you striker. I would not install it. I use and recommend the factory striker spring. You will most likely have more light primer strikes if you change that out, but ultimately it's up to you. Trying their spring can't hurt. You can always change it back out if I'm right. No harm in Trying though.

Great that was my goal. Trying to shed some light for yall. Once you get it tuned, it's amazing. Good luck my friend. Lmk how you make out.

@dfendurselfjones226 yes the 15lb spring is designed for the 9mm. That would explain it being beat. I run a 19lb spring in the 40s&w. I expiramented with all different weight springs. 19lb for 40s&w is the perfect tuning for lock up and ejection pattern.

@dfendurselfjones226 also keep in mind that my slides are aftermarket and tend to be much lighter than oem slides. And mine is a glock 22 gen 3 gen 4 hybrid. Gen 4 frame, gen 3 slides with strike industries mass driver adapter plate.

@thelanecompound9706 appreciate the advice man, I'll give a 19lb spring a try! I may see if I can find a slightly stronger spring in the comp as well I will update you.

@jadaugherty81 I did find flawless running for both calibers. 15lb spring for 9mm and 19lb spring for 40s&w. Mine locks up perfectly, but there are a few things to consider. Both of my slides are lighter than a factory slide, my parts are probably different than yours, and my glock is actually a hybrid. I use gen 4 frame, and gen 3 slides with strike industries adapter to mate the gen 3 slides to the gen 4 frame. I actually use an adapter plate that is for the mass driver comp in this format so yeah our builds are more different than it would seem at first glance.

@jadaugherty81 I have 0 issues with mine. It is just as reliable as a factory glock. Plus I reload my own ammo so that is also a way to tune your firearm. I load some semi hot loads to run through it and that helps with cycling and ejection pattern is crucial to tunning.

@@thelanecompound9706 so would you recommend going a lighter spring with mine? Mine isn’t completely stock either. I have a Norsso slide on mine with window cuts so mine is probably lighter as well. I want to try and make it work with the range ammo that I have which is 165 grain. Also is your spring compressed more than half of what it was when you bought it now when you take it out of the gun?

@jadaugherty81 no, my 19 lb spring has maintained its shape and size, and I've put about 600 rounds through it with no problem s. Sounds like you need a new spring.

@@thelanecompound9706 that’s just it, it was brand new and I took it out to shoot once. Now it’s compressed. It’s a Wolff spring too. Is there a specific brand I need to be looking at?

@@Awkwardshooter It's definitely hard. No doubt

@904duval8 thank you brother

@@thelanecompound9706 yessir 🫡💯

@jadaugherty81 you should not have to go heavier but I run 19lb in my glock 22. Your case might call for a 20lb spring. That's my best guess. The spring should not be losing strength. That's weird 😕

Killer innovations is a great choice. Some of the builds on your channel are quite amazing.

It's the only way to be bro lol. 💯

Thanks 😊

There’s one option for this piece. The new XTen grips work with the .45. Icarus precision makes one but they never have anything in stock. 🤷🏻‍♂️

@litspeed7940 lol nice. Check out my new video part 2. I sent it to NCENGRAVERS and had a bunch of work done to it. Love it now.

@litspeed7940 yeah iv been searching for a while. No available options. The grip actually feels decent in the hand. I did post a newer video on it. Check it out if you have some time.

@NCEngravers thank you so much For everything.

@@904duval8 it sure does. I should make a new video on it now that it's completely tuned.

@kingxdrew2x792 awsome I settle on a 19lb spring for the 40s&w. Ejection pattern is perfect. Drops all the casings in a consistent pile about 4 feet away.

@@thelanecompound9706 thank you sir! appreciate the help, looking forward to makin that .40 feel like a 9 haha 🔥

@@kingxdrew2x it's amazing bro, you will be happy with it once you get it all tuned in.

@@thelanecompound9706 can’t wait! thank you again, I subbed to the channel, will keep you updated on the process when i get it goin!

@@kingxdrew2x excellent, thank you very much. I'm looking forward to hearing how it turns out.

@ArmeroPR I'm 💯 % completely happy with it now. It went from my almost least favorite in my collection to my most favorite. Ncengravers is very skilled, very polite, and the turn around time is about 1 to 3 weeks depending on how much customizing you want. I highly recommend. Super clean work.

@@ArmeroPR and thank you.

@@thelanecompound9706 great to know. I usually use C&H but I’m definitely gonna use NC for this gun. I wanted to do something similar but with less slide milling / holes. Now I’m rethinking this after seeing yours. Nicest 320 I’ve seen so far.

@@ArmeroPR I really do appreciate that. Hope yours turns out as good as mine. I would like to see it when you get it finished. Is yours a 45acp also?

@@thelanecompound9706 yup. It’s a 45. I’m mostly a 1911 guy but wanted something like this for riding my motorcycle. I think it fits the bill. It’s a good carry gun. I’ll send you a pic when I get her done

@@ArmeroPR check out my last video. I sent the whole thing to NCENGRAVERS. I did that and more. Let me know if you like it.

@@p00ch28 RMR

@seezinskreetins thank you sir sneezins

I'm not sure 🤷‍♂️

Lol my bad I suck at editing 😅

Glad to help.

My guy, it is actually at NCENGRAVERS right now getting the whole overhaul. Optic cut, slide cut, cerakote, and frame work. I will make a new video when it gets back to me.

Just sent it out to NCENGRAVERS to get lots of custom work done to it. Can't wait to get it back.

Thanks 💯

Tried for both my 19 & 23 it’s fits better in my 23 I haven’t ran it though

Mine is perfect now. 15lb spring in the 9mm, 19lb spring in the 40. Then ran a few mags and it is smooth and reliable now in both calibers. No malfunctions at all.

@@thelanecompound9706 can you use the same recoil spring that come with it for the 40 ? What’s the Ib on it ?

@elcuh9281 yes that is the 15lb spring. In the video I was using a 13lb spring, but yes 15 will work for both. Check out my other video with the .40 slide

@@thelanecompound9706where did you buy the spring can a gen 3 g17 15lb spring fit in a gen 3 glock 19 because in the site it dont show any option for the glock 19 gen 3

Thank you. I'm running full co witness cross armory gold with green fiber optics. I Love them. Not too expensive, but are rugged and provides true co witness with the red dot optic.

Thank you so much. Honestly the pdp has a better trigger and feel in the hand. Pdp for range shooting and fn509 for concealed carry I would say.

10mm keeps everything away

Thank you sir. 🫡

Thanks man. My son was recording for me.

Yes my friend. I will be uploading a video soon on a custom slide and mass driver I recently built in .40. It tames the 40 just like the 9mm. It's wild

So you need the 15lb spring for the .40? Is that a separate item you have to purchase from Strike Industries?

@jadaugherty81 you don't have to use a strike industries spring, any spring made for your glock model will work. I run a 15lb spring for 9mm, and a 19lb spring for 40s&w. Tuned perfectly.

@@thelanecompound9706 would the 19lb work in the G23 the same as the G22? I want to say my stock spring weight for my 23 is an 18lb.

They are different lengths. Glock 22 is longer like the 17, the 23 is the length of the 19. Buy one for the 19 or 23.

I highly recommend the Rex Zero 1. It is a tank, very accurate, and one of the most reliable handguns I've come across. I'm glad I picked it over the sig 226.

Thank you. I didn't know that those other two would work as well. Great info 👍