I’m getting my GTS wrapped in Mamba! Thanks for the video brotha!
@CarsandTechInfo13 күн бұрын
I love how you blacked out the giant lower reflector. It improves the look drastically!
@StanMisiano13 күн бұрын
I agree, it looks so much better!
@cloudspinwoodworks481314 күн бұрын
I was making a mess, really struggling until I tried your method. Thanks for posting!
@StanMisiano14 күн бұрын
Happy to hear it helped out!! 🥳🥳
@shawnoen102918 күн бұрын
The 3M Roloc is the gold standard for sanding disks and bristle disks. Seems like you can't even use them with this sander. FAIL.
@StanMisiano18 күн бұрын
I'm sure you could.
@felixa.medina864118 күн бұрын
hi, stan can you share the link to the satin chrome piece. greatly appreciated thanks in advance
@neilmac102329 күн бұрын
On your recommendation, I purchased the Winged Extended Thumbscrew so I could tighten it down using the media mod, and guess what, the screw is too short to reach the other side. I had to modify two of them so I could tighten them down. I carefully took a hacksaw and cut off the little piece on the wing part making the screw just long enough to catch the holding nut. I am also using the GoBUDi Extension Pole Set compatible with All GoPro Hero Cameras. After removing the small piece on the wing nut they work just fine now but I shouldn't have had to do that.
@timmytom444729 күн бұрын
Very well done sir.
@StanMisiano23 күн бұрын
🙏🙏
@213gixxerАй бұрын
I can’t find the caster???
@StanMisiano23 күн бұрын
You need to call the number on their website and use the serial number on the back of the box
@isaacmcmillen9246Ай бұрын
great vid!
@StanMisianoАй бұрын
🙏🙏🙏
@shih-hungku9286Ай бұрын
Excuse me sir, do you have Santa Fe fog lights ?
@StanMisianoАй бұрын
I do not
@joserosario4558Ай бұрын
Great content 👌 👏
@StanMisianoАй бұрын
🙏🙏🙏
@TipuTravelАй бұрын
My gopro 10 is overheating since installing mediamod, I've noticed this a few times. Looking for solutions
@StanMisianoАй бұрын
Typical GoPro issue. Buy a DJI like I did, batteries don't die and they don't overheat. 🤷♂️
@adrian10k5kАй бұрын
If your use case allows, you can take out the battery and use either an external battery or the Volta for battery.
@StanMisianoАй бұрын
I've tried that before as well and it's still not the best solution. Still gets hot. And you're also losing the mobility aspect of an action camera.
@luisortiz4792Ай бұрын
HIDDEN HARDWARE!!!
@StanMisianoАй бұрын
Unfortunately I wouldn't do hidden hardware. It looks good, but the usability is to much of a hassle.
@lalo-kn1no2 ай бұрын
A full led reflector bar would have looked better imo
@StanMisiano2 ай бұрын
I couldn't disagree more. The point is to remove the reflector. Why would I want to add one that lights up!? Did you listen to anything in the video? 🤦♂️🤦♂️🤦♂️
@lalo-kn1no2 ай бұрын
Idk I think a reflector with no function that doesn’t light up looks kinda lame but if it’s a full led light bar that’s sick and futuristic . With the chrome strip it looks like the back of the 2020 model with the front of a 2023 . Mismatched af
@StanMisiano2 ай бұрын
Great observation buddy. FYI the literal dash display of the face lift models has the chrome trim in the picture. Not the red reflector. So this is technically more consistent.
@bdm10002 ай бұрын
Wow, thanks for the tip. It looks amazing. If you wrenches look like that, I hope there is a shop tour in more recent videos to watch.
@StanMisiano2 ай бұрын
I had originally planned on doing a full toolbox video, just haven't had the chance to. Maybe soon I will try to!
@paulanderson22922 ай бұрын
So I just added this BOV, but I don’t get boost when revving in neutral like this. How do I do that?
@StanMisiano2 ай бұрын
Something must be installed incorrectly would be my guest.
@hogueraleksander58682 ай бұрын
How much were the sliders?
@StanMisiano2 ай бұрын
Unfortunately I forget the exact price it's been so long since i purchased them. They weren't super expensive though, considering they are heavy duty, full extention slides.
@hungaw_blog2 ай бұрын
I saw some are install blow off valve near throttle body, is that correct????
@StanMisiano2 ай бұрын
Not 100% sure, this is simply where I installed mine. And I have had zero issues years later.
@JoeMooney-xn1xh2 ай бұрын
What about swapping the bumper directional signal lights up to the taillights where they belong ?
@StanMisiano2 ай бұрын
Too much work. Plus there would still be the lights in the bumper.
@darrellsmith44632 ай бұрын
Thanks for the video-great ideas and most helpful.
@StanMisiano2 ай бұрын
Glad to hear, thank you!!
@nikitagurbangulyyev52982 ай бұрын
Hey Stan, thanks for the video. I just bought a used Santa Fe Calligraphy 2022 with NICHE GAMMA 22in rims. I was worried if it makes sense at all to use them or replace with 20in for a more comfort ride. What would you suggest? Thanks in advance
@StanMisiano2 ай бұрын
I see no real reason to replace then unless you simply didn't like them. All personal preference.
@57Tundraman3 ай бұрын
Where did you get the replacement trim?
@StanMisiano3 ай бұрын
I just ordered it online
@vincentcryer29893 ай бұрын
You did not say where to buy the large wing mount screw for my GoPro 12
@StanMisiano3 ай бұрын
Link is in the description for the wing screws.
@tv41843 ай бұрын
ive been thking of wrapping my land cruiser in this color. I've been on a green kick
@StanMisiano3 ай бұрын
This color would look killer on one of those
@tannerpowell30733 ай бұрын
this may be a bit off a silly question, but would this process be the exact same for any other bov? i bought a greddy bov
@StanMisiano3 ай бұрын
Yeah it should be the same
@paladin20913 ай бұрын
Where did you buy the lip , I’m looking for a safe website to buy, for my weds kranze bazreia 18'
@StanMisiano3 ай бұрын
VR Wheels
@lancez.32873 ай бұрын
Superb plan & wonderful Job! Outstanding organizational skills you have!
@StanMisiano3 ай бұрын
Thank you, very happy with how they turned out.
@kenvchigongstudent69963 ай бұрын
what about the other BIG issue.. Media mode makes the gopro no longer waterproof. I think this is worse than the changing screws. Water could ruin the gopro!
@StanMisiano3 ай бұрын
I don't take mine near water so never had to worry about. Also, I don't see why you would be using a media mod if you were going too be in the water anyways. 🤷♂️
@kenvchigongstudent69963 ай бұрын
@@StanMisiano media mode - not even against RAIN
@StanMisiano3 ай бұрын
Yeah, I wouldn't be worried about it in rain. It's still water resistant. It just can't be submerged. No idea what else to tell you though. I don't even use GoPro anymore. 🤷♂️🤷♂️🤷♂️
@OldPeopleHealth3 ай бұрын
Just curious. What do you use now?@@StanMisiano
@StanMisiano3 ай бұрын
I bought a DJI Action last fall, got sick of the endless GoPro issues. Or I'll just use my phone.
@Jakepp2354 ай бұрын
How many mm are the sheets you have?
@StanMisiano3 ай бұрын
I think these ones were 30 mm sheets
@doctawhite2744 ай бұрын
Does it come with a warranty?
@StanMisiano4 ай бұрын
Yes, lifetime warranty.
@doctawhite2744 ай бұрын
@@StanMisiano oh sweet, looking at getting this for my new toolbox can't beat that price for the amount of stuff yah get
@doctawhite2744 ай бұрын
@@StanMisiano also I like how people clicked on a review video and get mad at you for reviewing the items 😭
@christopherlabarge63644 ай бұрын
I have to let you know that I like your videos but I had to stop watching this one because you kept moving in and out from were you were working and it started to make me sick but I do like your video's sorry
@StanMisiano4 ай бұрын
Haha No worries dude, staying still is harder than it seems sometimes. Lol
@oOs4MzOo4 ай бұрын
Hey bro what area u from, could use a install buddy 😅
@tonewheel4 ай бұрын
Any thoughts on upgrading the rear turn signal bulbs to brighter ones? Easy to get to...
@StanMisiano4 ай бұрын
Don't really see the need in my opinion
@SL_BA4 ай бұрын
Thank you! I have had my media mod for a year and have rarely used it because it is such a pain.
@StanMisiano4 ай бұрын
Yeah it's such a bad design.
@user-ee8zo1kn1k4 ай бұрын
hey man! i just installed mine exactly same like this but im not getting any chirp sound like the hks make. do you know how to fix?
@StanMisiano4 ай бұрын
Unfortunately I don't have any troubleshooting tips. I didn't have the issue so I don't have any experience trying to solve it. Maybe it's the blow off valve itself having something stuck? Not entirely sure, sorry.
@chriscotton42074 ай бұрын
You didn't use it.....
@StanMisiano4 ай бұрын
Just an unboxing, this is an old video, but I'm pretty sure I even said that in the video.
@BryanMiraflor4 ай бұрын
gopro needs to make a media mod that allows people to remove the gopro without having to unscrew anything. so dumb that they integrated the folding fingers come out of the media mod. you can't easily slide the GoPro it in and out.
@StanMisiano4 ай бұрын
I totally agree with you, no idea why they did it like this.
@johngalt54115 ай бұрын
I'm currently renting this car & loving it. I like the assists too except the one that sometimes tells me to take a break, lol
@StanMisiano4 ай бұрын
You can turn that "take a break" notification off. That's exactly what I did almost immediately. Lol
@ptaglino5 ай бұрын
Well done accurate video. Did you contact Fast cap, did they reimburse you in anyway or change their shipping policies?
@StanMisiano5 ай бұрын
No, I didn't contact them. Just worked around the damage.
@kellyschomaker76955 ай бұрын
Pica are the better markers
@StanMisiano5 ай бұрын
Good to know
@danthemancan34015 ай бұрын
Define “cut way inside the traced line”. I understand you want the finished product to be tight but clearly you don’t any it too tight that you have to go back and remove additional foam. So are you cutting on the inside of the black line ? A 1/16th, an 1/8th or what ? Thanks again for the video ! Great information. I appreciate learning all the best practices before wasting my time and money making mistakes.
@StanMisiano5 ай бұрын
Just need to figure out which works best for your individually.
@vladmihajlovic25795 ай бұрын
When will will see some Santa Fe videos?
@StanMisiano5 ай бұрын
Hopefully at some point this spring
@icsmodgaming5 ай бұрын
omg, DUDE...THANK YOU!!!
@StanMisiano5 ай бұрын
Haha Game changing, right? Lol
@chrishessey97335 ай бұрын
Can you use a 4-inch backing pad?
@StanMisiano5 ай бұрын
Technically yes, I don't think they advise it though. But I don't see why not personally. Lol
@John-of5sh5 ай бұрын
I use to have a friend that was just like a brother to me. Sadly he passed away a few years back. Anyway he had the same perfectioness blood running in his veins that you do. Just wish he was here to see this video. Once again Thank You for sharing your time and expertise! Looking forward to trying out the tips you have listed and I will bewatching for more of your video's!!!
@StanMisiano14 күн бұрын
Sorry to hear about your loss, and sorry for not seeing this comment until months later. Thank you for the kind words. 🙏🙏
@John-of5sh5 ай бұрын
Just found this video and I have to say the trick with the blue painters tape is ther bomb!! Thanks so much for sharing your time and expertise!
@StanMisiano5 ай бұрын
Happy to hear you found it useful, I definitely think this is the best way.
@brandonelliotphotography5 ай бұрын
Brilliant idea!!
@StanMisiano5 ай бұрын
🙏🙏
@rsporsche5 ай бұрын
I like the shadowfoam approach of directly cutting the outline with a scalpel. Worked pretty well for me so far. Just lightly cut around to mark the outline, then go over again to get to the required depth.
@StanMisiano5 ай бұрын
Only issue with that is there's too much chance for a mistake to happen for me.
@rodneym405 ай бұрын
This is amazing. I watched your video and tried to rough cut it and it looked terrible, so I followed your instructions and it came out really professionally done. I think also the tip on using a pick really helps for removing foam. Thank you for doing this video, everything you said worked wonders
@StanMisiano5 ай бұрын
Happy to hear you found the tips useful.
@dimitarkarchev9685 ай бұрын
I like the black vinyl, but you covered the rear fog lights with it.